• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.493-499
• /
• 2011

To improve the bandwidth efficiency of conventional orthogonal modulation, the MCTO(Multi-Code Trans-Orthogonal) modulation, which is modified orthogonal modulation, was proposed. However, the RF(Radio Frequency) power amplifier for the MCTO modulation is too complex to reject the amplitude distortion due to the non-constant amplitude property of the MCTO. Therefore, in this paper, CAMCTO(constant-amplitude multi-code trans-orthogonal) modulation is proposed by using the constant-amplitude encoding algorithm for multi-code signal. Additionally, the performance of the proposed CAMCTO modulation is compared with those of the orthogonal modulation and the MCTO modulation by using the computer simulation. The computer simulations show that the bandwidth efficiency of the proposed CAMCTO modulation is better than that of the conventional orthogonal modulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3C
• /
• pp.69-76
• /
• 2005

In this paper, we propose a biorthogonal modulation employing a constant-amplitude transmission of multi-code signals by introducing a simple constant-amplitude coding scheme with redundant bits. The proposed constant-amplitude biorthogonal multi-code (CABM) modulation can provide high spectral efficiency compared with a conventional direct sequence/spread spectrum (DS/SS) modulation. Nevertheless the proposed CABM modulation can keep up a constant-amplitude signal. Additionally, we propose various types of demodulation structures for the CABM modulation. Simulation results show that bit error rate (BER) performance and hardware complexity of the proposed CABM modulation are highly improved in comparison with those of a constant-amplitude orthogonal multi-code (CAOM) modulation.

• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.76-82
• /
• 2005

A novel variant of full multi-modulation applications to diode-clamped and cascade multilevel inverter-termed single carrier multi-modulation is presented. The proposed PWM-technique is advantageous for its simple implementation. The correlation between multi-carrier and single-carrier multi-modulations is deduced. For the PWM methods, a mathematical model of voltage source inverter and general algorithm for the multi-modulating modulator are proposed. The theory is demonstrated by simulation results

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.655-658
• /
• 2008

In this paper, we explain the combined scheme of multi-code modulation and trans-orthogonal modulation. The name of the explained scheme is the multi-code trans-orthogonal modulation. Additionally, we propose a multi-code trans-biorthogonal modulation scheme, which is a little more improved multi-code trans-orthogonal modulation. We show the performance of the proposed schemes and compare the performance of the proposed schemes with the orthogonal modulation by using the computer simulation. According to the computer simulations, we can know that the bandwidth efficiency of the proposed schemes is better than that of the conventional orthogonal modulation. The proposed schemes can be used in physical layer of digital wireless telecommunication system to provide high speed data rate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1601-1607
• /
• 2009

As a general rule, the orthogonal modulation scheme which is widely used for wireless communications is not appropriate for the high speed data transmission applications due to the low bandwidth efficiency. Therefore, to increase the bandwidth efficiency of the conventional orthogonal modulation, we propose the multi-code trans-(bi-)orthogonal modulation in this paper. It is the combined scheme of multi-code modulation and trans-orthogonal modulation. We can know that the bandwidth efficiency of the proposed scheme is better than that of the conventional orthogonal modulation. Additionally, the receiver complexity of the proposed scheme is lower than that of the conventional orthogonal modulation. The proposed scheme can be used for the physical layer of the high speed wireless digital data transmission applications such as multimedia communications system and high speed personal area networks.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.6
• /
• pp.299-305
• /
• 2006

In this paper, we suggest a new space vector PWM modulation method with very short processing time which does not need identification of nearest three vectors(NTV) and duty ratio for each vector. The suggested PWM method makes mean value of phase voltage to be same as reference during every modulation period by use of a triangle in small hexagon on multi-level vector space. This paper described the suggested modulation method can be successfully applied to the space vector modulation use of multi-level inverter by computer simulations and experiments.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.8-14
• /
• 1992

In this paper, the differential detection technique of multi-h CPM is introduced and described. We derived the sets of modulation index of multi-h phase codes adequate to the differential detection. The power spectra of multi-h signals with various sets of modulation index are presented and compared to those of MSK and QPSK. Error rate performances of the conventional detector and Viterbi algorithm detector of 2-h and 3-h CPM are evaluated and compared.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.107-114
• /
• 2012

In this paper, we propose a new modulation scheme called multi-coded variable pulse position modulation (MC-VPPM) for visible light communication systems. Two groups of signals (Pulse Width Modulation (PWM) and Pulse Position Modulation (PPM) groups) are multi-coded by orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multi-coded signal is converted to pulse width and position which results in not only an improved data rate, but also a processing gain in reception. In addition, we introduce average duty ratio and cyclic shift concepts in PWM through which dimming control for light illumination can be supported without any degradation in communication performance. Through simulation, we confirm that the proposed MC-VPPM shows a comparable BER curve and much greater achievable data rate than the conventional VPPM scheme using a visible light optical channel environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.669-672
• /
• 2008

In this paper, we propose a constant-amplitude multi-rode trans-bi-orthogonal modulation scheme by introducing a simple constant-amplitude coding scheme with redundant bits and trans-code, which if a modified orthogonal modulation scheme. Generally speaking, the orthogonal modulation scheme is not appropriate for the high speed data transmission applications because of bad bandwidth efficiency. Therefore, we use the multi-rode trans-bi-orthogonal modulation with trans-code for high bandwidth efficiency. Moreover, redundant bits are used for constant-amplitude-coding. Finally, we compare the performance of the proposed scheme with the orthogonal modulation and constant-amplitude multi-code trans-orthogonal modulation by using the computer simulation.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1160-1172
• /
• 2017

A novel space vector modulation strategy in the non-orthogonal three-dimensional coordinate system for multi-level three-phase four-wire inverters is proposed in this paper. This new non-orthogonal three-dimensional space vector modulation converts original trigonometric functions in the orthogonal three-dimensional space coordinate into simple algebraic operations, which greatly reduces the algorithm complexity of three-dimensional space vector modulation and preserves the independent control of the zero-sequence component. Experimental results have verified the correctness and effectiveness of the proposed three-dimensional space vector modulation in the new non-orthogonal three-dimensional coordinate system.