• 소음진동
• /
• 제4권1호
• /
• pp.23-31
• /
• 1994

When a shaft is misaligned, a high level of vibration is experienced. As a consequence, the system performance could be low with high level of noise generated. Even, a catastrophic damage of the rotating machinery may happen in the worst situation. The vibration caused by the shaft misalignment is not cured unless a correct alignment of the shaft is investigated. In this paper, a step by step approach for the turbine alignment has been demonstrated. It includes measurement tips of the coupling rim and face, calculation procedure of the bearing level, and the relevant values of the addition and subtration for shims in order to align the shaft level correctly. Then, as an application of the shaft alignment, the turbine system at the Pyung Tek focile electric power plant has been examined. Since the real system consists of high pressure, low pressure turbines and the generator, detailed alignment prolcedures of the multi stage shaft system has been demonstrated.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.402-405
• /
• 2012

문서와 문서간의 유사도들 측정하는 방법 은 크게 지문법 (fingerprint)을 이용한 방법과 서열 정렬(sequence alignment)알고리즘을 이용한 방법이 있다. 두 방법은 각각 속도와 정확도라는 장점을 가지고 있다. 다단계정렬(MLA, Multi-Level alignment))는 이러한 두 방법을 조합하여 탐색 속도와 정확도 사이의 비중을 사용자가 결정할 수 있도록 하기 위한 방법이다.[1] 다단계 정렬은 두 문서를 단위 블록(basis block)로 나누고 블록 간의 벡터를 비교하여 유사도를 측정하게 되는데, 본 연구에서는 초성 추출 및 어간 추출을 통해 단위 블록의 벡터를 빠른 시 간에 생성하고 비교하는 방법과 다단계 탐색을 통해 정확도를 유지하면서 빠르게 유사도를 측정하는 방식에 대해 설명한다. 실험결과 제안 방법을 통해 다단계 정렬 방법을 이용한 대용량 문서 비교의 속도가 2 배 이상 빨라짐을 보인다.

• 정보과학회 논문지
• /
• 제41권9호
• /
• pp.728-743
• /
• 2014

유사한 문서를 비교하는 방법으로는 지문법과 서열 정렬법이 널리 알려져 있다. 지문법은 계산속도가 빠른 대신 정확도가 떨어지며, 서열정렬법은 계산속도가 느린 대신 정확도가 높다. 다단계 정렬은 두 방법의 비중을 조절하여 문서 유사도를 비교할 수 있는 새로운 방법의 문서 유사도 측정 방법으로, 각 방법의 장점을 얻으면서 동시에 단점을 보완하도록 고안되었다. 특히 두 비교 방법의 비중을 "블록크기"라는 단일 변수를 이용하여 조절할 수 있도록 한 것이 제안 시스템의 핵심이다. 다단계 정렬은 문서를 일정한 길이의 블록으로 나누어 지문을 추출하고 블록간의 유사도를 계산한 다음 그 결과를 서열정렬법으로 다시 한 번 탐색하는 과정을 거친다. 이때 문서가 분할되는 과정에서 유사구간이 두 개 이상의 블록으로 나누어지는 현상이 발생하기도 한다. 이 논문에서는 다단계 정렬방법에 대해 설명하고, 유사도 비교 성능 개선을 위한 단편화 제거 기법과 휴리스틱 비교법에 대해 설명하고 실험적으로 그 결과를 보인다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권2호
• /
• pp.83-87
• /
• 2014

This paper introduces a refined opportunistic interference alignment (OIA) technique that uses minimum mean square error (MMSE) detection at the receivers in multiple-input multiple-output multi-cell uplink networks. In the OIA scheme under consideration, each user performs the optimal transmit beamforming and power control to minimize the level of interference generated to the other-cell base stations, as in the conventional energy-efficient OIA. The result showed that owing to the enhanced receiver structure, the OIA scheme shows much higher sum-rates than those of the conventional OIA with zero-forcing detection for all signal-to-noise ratio regions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권10호
• /
• pp.4903-4929
• /
• 2018

In this study, a fully automatic pose and expression invariant 3D face alignment algorithm is proposed to handle frontal and profile face images which is based on a two pass course to fine alignment strategy. The first pass of the algorithm coarsely aligns the face images to an intrinsic coordinate system (ICS) through a single 3D rotation and the second pass aligns them at fine level using a minimum nose tip-scanner distance (MNSD) approach. For facial recognition, multi-view faces are synthesized to exploit real 3D information and test the efficacy of the proposed system. Due to optimal separating hyper plane (OSH), Support Vector Machine (SVM) is employed in multi-view face verification (FV) task. In addition, a multi stage unified classifier based face identification (FI) algorithm is employed which combines results from seven base classifiers, two parallel face recognition algorithms and an exponential rank combiner, all in a hierarchical manner. The performance figures of the proposed methodology are corroborated by extensive experiments performed on four benchmark datasets: GavabDB, Bosphorus, UMB-DB and FRGC v2.0. Results show mark improvement in alignment accuracy and recognition rates. Moreover, a computational complexity analysis has been carried out for the proposed algorithm which reveals its superiority in terms of computational efficiency as well.

• 한국항공운항학회지
• /
• 제16권1호
• /
• pp.29-36
• /
• 2008

The vulnerability of aircraft, especially rotary wing aircraft, has been an ongoing issue since their advent in combat operations during the 1940s. In this paper, representative sensors for survivability of those aircraft in modern battlefield are surveyed and top level requirements and parameters are defined. Also problems of multi-sensor alignment on modern agile and flexible platform are discussed and several techniques such as static alignment and transfer alignment are introduced.

• 한국통신학회논문지
• /
• 제41권11호
• /
• pp.1639-1644
• /
• 2016

본 논문에서는 802.11.ac규격 기반의 WiFi 서비스에서 간섭정렬 알고리즘의 적용에 따른 성능 향상을 평가하기 위해 스케줄러를 연동한 물리계층 시뮬레이터를 구성하고 이를 이용하여 수행한 모의실험 결과를 제시한다. 특히, 완전한 채널정보을 가정하고 [13]에서 제안된 SLNR(Signal-to-Leakage-interference-and-Noise Ratio) 기반의 간섭 정렬 기술과 다중사용자 빔형성을 사용한 시간공유 기술을 비교하였고, 결과적으로, 비례공평 스케줄러 하에서 간섭정렬 기술이 시간 공유 기술 대비 70%~100% 정도의 수율 이득이 있음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제52권10호
• /
• pp.2221-2229
• /
• 2020

After the Fukushima Daiichi nuclear power plant (NPP) accident, level 3 probabilistic safety assessment (PSA) has emerged as an important task in order to assess the risk level of the multi-unit NPPs in a single nuclear site. Accurate calculation of the radionuclide concentrations and exposure doses to the public is required if a nuclear site has multi-unit NPPs and large number of people live near NPPs. So, there has been a great need to develop a new method or procedure for the fast and accurate offsite consequence calculation for the multi-unit NPP accident analysis. Since the multi-unit level 3 PSA is being currently performed assuming that all the NPPs are located at the same position such as a center of mass (COM) or base NPP position, radionuclide concentrations or exposure doses near NPPs can be drastically distorted depending on the locations, multi-unit NPP alignment, and the wind direction. In order to overcome this disadvantage of the COM method, the idea of a new multiple location (ML) method was proposed and implemented into a new tool MURCC (multi-unit radiological consequence calculator). Furthermore, the MURCC code was further improved for the multi-unit level 3 PSA that has the arbitrary number of multi-unit NPPs. The objectives of this study are to (1) qualitatively and quantitatively compare COM and ML methods, and (2) demonstrate the strength and efficiency of the ML method. The strength of the ML method was demonstrated by the applications to the multi-unit long-term station blackout (LTSBO) accidents at the four-unit Vogtle NPPs. Thus, it is strongly recommended that this ML method be employed for the offsite consequence analysis of the multi-unit NPP accidents.

• 한국정보기술학회 영문논문지
• /
• 제9권2호
• /
• pp.1-14
• /
• 2019

This paper considers a multiple-input multiple-output (MIMO) power line communication (PLC) network where interference alignment (IA) technique is used to mitigate the interference that arises in multi-user networks. IA as a precoding technique requires perfect channel state information (CSI) to achieve maximum multiplexing gain. Due to the common-mode reception at the receiver ports, we assume imperfect CSI for the IA precoding design. Here, the CSI is quantized and sent via feedback to the transmit ports. For different levels of CSI quantization, we evaluate the performance of various IA algorithms via Monte Carlo simulations. Simulation results reveal the superior performance of the proposed scheme due to common-mode reception in IA MIMO PLC networks. It is shown that for a quantization level of 5 bits, the CM reception improves the sum-rate by up to 70%.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.489-492
• /
• 2005

As a former level of MSC(Multi Spectral Camera) telescope of the KOMPSA T2satellite, the several performance tests of EOS(Electro Optical Subsystem) were performed in the EOS level. By these tests, not only the design requirement of payload can be verified but also the test result can be the important criterion to estimate the performance of payload in the launch and space orbit environment. The EOS Geometric Mapping test is to verify the accuracy of the alignment & assembly on the Subsystem of the MSC by measurement like these; LOS(Line of Sight), LOD(Line of Detector), Band to Band Registration, Optical Distortion and Reference Cube. This paper describes the test results and the analysis for the EOS Geometric Mapping.