• The Journal of the Acoustical Society of Korea
• /
• v.17 no.4E
• /
• pp.17-21
• /
• 1998

This paper presents an implementation of a multi-channel speech surveillance system over telephone lines using TMS320C31 DSP chips. The incoming speech into each telephone line are first compressed simultaneously in real-time by the popular vector-sum excited linear predictive (VSELP) speech coding algorithm at the rate of 8 Kbps. The compressed steech bit streams are then multiplexed with those of other users. The multiplexed speech bit streams are transferred to the system storage equipments with some other required information so that a system operator can later monitor the stored speech data whenever it is necessary. The host program runs under Microsoft Windows95 for an efficient man-machine interface and a future upgrade-ability. We have confirmed that the overall 64-channel system operates satisfactorily in realtime. We also have checked approximately up to 2,880 total hours of recording capability of the system on a playback module and two removable backup drives.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.687-689
• /
• 2010

In this paper, the equalization for frequency slope of path loss in Multi-Band(MB) OFDM UWB is proposed. The path loss of a signal is proportionate to the square of the signal's frequency. So, the received signal amplitudes of OFDM subcarrier can be different up to 3dB when MB-OFDM occupies bandwidth over 1.5GHz. The differences of subcarrier-amplitudes make an effective of 0.3 bit reduction of soft decision bits of viterbi decoder, and when the effective of 0.3 bit reduction can cause 0.5dB SNR degradation. This paper proposes two modem architectures which compensate for the degraded subcarrier by multiplying the reciprocal of degraded values in analog or digital domain. It is shown that, for the proposed architecture applied to MB-OFDM UWB, the performance improvements up to 0.5dB can be obtained over the conventional uncompensated receiver architecture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2033-2042
• /
• 1996

In this papre, we describe a recently implemented echo canceller for digital cellular communication of Code Division Multiple Access(CDMA) that features time sharing of digital signal processor(DSP) over four channels in one DSP to reduce per channel costs. In the Public Land Mobile Network(PLMN), it is important to cancel the echo reflected from the Public Switched Telephone Network(PSTN) side. In case of digital mobile system, the round-trip delay of the echo is in excess of about 180 milliseconds due to frame-by-frame voice coding. It is necessary to cancel the echo in PLMN. We have developed a multi-channel echo canceller tht operates with Time Switch Module in a Mobile Switching Center(MSC). The general echo canceller needs PCM trunk interface circuits and the tone detection and disabling circuits, but the multi-channel echo canceller linked with Time Switch Module does not need them. Therefore we could develop the effective and economical echo canceller.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.585-588
• /
• 2007

WMNs(Wireless Mesh Networks)은 기존 유 무선망 구축 시 발생하는 고가의 비용 및 이동성 제약 등의 단점을 극복하기 위해 제안된 네트워크 구조로써 네트워크 구축비용에 비해 광범위한 인터넷 접근영역을 제공하는 장점을 가진다. 특히, IEEE 802.11e를 MAC 계층으로 사용하는 WMN은 기존 IEEE802.11에서 보다 강화된 QoS(Quality of Service)기능을 가지므로, 안정적 멀티미디어 관련 응용 계층을 지원하는 WMN 구축을 위해 주목받고 있는 기술 중 하나이다. 본 논문은 광주과학기술원에 설치된 MIMC(Multi-Interface Multi-Channel) WMN 테스트베드를 QoS 기능 지원을 위해 IEEE 802.11e 기반으로 확장한다. 특히, 확장에 필요한 소프트웨어 요소 및 하드웨어 요소에 대해 논한다. 또한, 확장된 IEEE 802.11e WMN 테스트베드를 사용하여 현재 주목받고 있는 IEEE 802.11e기반 WMN의 기본 쓰루풋 성능, 쓰루풋 차별화 성능등을 실험적으로 분석한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.86-88
• /
• 1996

A method is presented for the development of the PC-based measurement system on the 6 cathodes-single anode type multi-functional oxygen electrodes for detecting various components of the solution by measuring the dissolved oxygen(DO) concentration. The system is consisted with the 6 channel sensor signal modyfing circuits for the sensor and the PC interface circuits using the single chip microprocessor 80c196kc. Typical polarograms for the DO probes under test using this sensor circuits are presented. This system covers wide range of measuring time from 300sec to over 16 hour in one measurement step by programming the 9 monitor disply mode.

• 한국IT서비스학회:학술대회논문집
• /
• 2010.05a
• /
• pp.202-206
• /
• 2010

무선 메쉬 네트워크(Wireless Mesh Network, WMN)는 유비쿼터스 환경 및 무선 브로드 밴드 액세스를 제공하기 위한 차세대 핵심기술로 떠오르고 있다. 다양한 멀티미디어 서비스가 존재하는 유비쿼터스 환경에서 실시간 서비스 제공을 위해서는 네트워크 용량 증대가 요구되며, 이를 위하여 WMN에서 네트워크 용량을 증대시키기 위한 다중 인터페이스 활용 기술이 중요한 이슈로 대두되고 있다. 하지만 WMN에서 주로 사용하는 인터페이스 기술인 IEEE 802.11 표준에서는 IEEE 802.11b/g 또는 IEEE 802.11a와 같은 스펙에 따라 간섭 없이 사용할 수 있는 채널은 3개 또는 12개로 한정되어 있기 때문에 다중 인터페이스 활용을 통해 증대된 가용 자원 효율성을 극대화하기 위해서 효율적인 채널 할당 기법의 연구가 요구되며, 이에 따라 본 논문에서는 채널 그룹 설정을 통하여 간섭 발생을 최소화하며 채널스캐닝 과정을 수행하지 않고 채널 변경을 진행함으로써 채널 스캐닝 과정으로 발생하는 전송 지연을 최소화하여 네트워크 성능을 향상시킬 수 있는 채널 할당 기법을 제안한다.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.354-359
• /
• 2012

A transformerless converter suitable for multiphase drive application is presented in this paper. The topology employs a cascaded H-bridge rectifier as the interface between the grid and multi inverters which drive the multiphase motor. Compared with the conventional structure, the new topology eliminates the input transformer and also has the advantages such as four quadrant operation, simple configuration, low cost, high efficiency, and so on. The control strategies for the grid-side cascade H-bridge rectifier and the motor-side inverter are studied accordingly. Based on the multi-rotational reference frame, modular control scheme is developed to regulate the multiphase drive system. Simulation results show the proper operation of the proposed topology and the corresponding control strategy.

• Advanced Composite Materials
• /
• v.18 no.3
• /
• pp.209-219
• /
• 2009

Carbon nanotubes (CNTs) have shown great potential for the reinforcement of polymers or fiber-reinforced composites. In this study, mechanical properties of multi-walled carbon nanotube (MWNT)-filled plain-weave glass/epoxy composites intended for use in radar absorbing structures were evaluated with regard to filler loading, microstructure, and fiber volume fraction. The plain-weave composites containing MWNTs exhibited improved matrix-dominant and interlaminar fracture-related properties, that is, compressive and interlaminar shear strength. This is attributed to strengthening of the matrix rich region and the interface between glass yarns by the MWNTs. However, tensile properties were only slightly affected by the addition of MWNTs, as they are fiber-dominant properties.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.6
• /
• pp.86-92
• /
• 1993

In this paper, we present a VLSI chip design of Multi-layer Bidirectionsl Associative Memory with good error-correction performance. The MBAM neural chip utilizes inner product implementation schems with binary storage and analog calculation.. Multi-layer can be constructed by direct cascading of these chips, and the number of neurons is expandable by parallel connection of these chips. We made proto-type chips and interface board to test the expansion. Currently the Chip has 32 input nodes, 32 output nodes, and can store up to 48 patterns, 32x48x2 SRAMs are included in the chip.

• Structural Engineering and Mechanics
• /
• v.54 no.4
• /
• pp.623-648
• /
• 2015

A numerical approach is presented for the analysis of the forced vibration of a rigid surface foundation with arbitrary shape. In the analysis, the foundation is discretized into a number of sub squaree-lements. The dynamic response within each sub-element is described by the Green's function, which is obtained by the Fourier-Bessel transform and Precise Integration Method (PIM). Incorporating the displacement boundary condition and force equilibrium of the foundation, it obtains a system of linear algebraic equation in terms of the contact forces within each sub-element. Solving the equation leads to the desired dynamic impedance functions of the foundation. Numerical results are obtained for foundation not only with simple geometrical configurations, such as rectangular and circular foundation, but also the case of irregularly shaped foundation. Several comparisons between the proposed approach and other methods are made. Very good agreement is reached. Also, parametric studies are carried out on the dynamic response of foundation. Addressed in this study are the effects of Poisson's ratio, material damping and contact condition of soil-foundation interface. Several conclusions are drawn the significance of the factors.