• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.4 s.44
• /
• pp.55-66
• /
• 2005

The effectiveness of fuzzy supervisory control technique for the control of seismic responses of smart base isolation system is investigated in this study. To this end, first generation base isolated building benchmark problem is employed for the numerical simulation. The benchmark structure under consideration is an eight-story base isolated building having irregular plan and is equipped with low-damping elastometric bearings and magnetorheological (MR) dampers for seismic protection. Lower level fuzzy logic controllers (FLC) for far-fault or near-fault earthquakes are developed in order to effectively control base isolated building using multi-objective genetic algorithm. Four objectives, i.e. reduction of peak structural acceleration, peak base drift, RMS structural acceleration and RMS base drift, are used in multi-objective optimization process. When earthquakes are applied to benchmark building, each of low level FLCs provides different command voltage and supervisory fuzzy controller combines two command voltages io one based on fuzzy inference system in real time. Results from the numerical simulations demonstrate that base drift as well as superstructure responses can be effectively reduced using the proposed supervisory fuzzy control technique.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.25-34
• /
• 2006

In this paper DynaMoNET is suggested as a novel IPv6-based multi-homed mobile network architecture which is composed of nested mobile ad hoc networks dynamically coming together through wireless personal area networks. Each ad hoc network has a mobile router which may work as a root mobile router instead of fixed mobile routers in a DynaMoNET. A root mobile router provides the reliable Internet connectivity for the entire mobile network. This paper includes a innovative handover protocol for multi-homed mobile networks, network switchover algorithm considering multiple decision factors, root mobile router election process based on token-based algorithm fast root mobile router discovery algorithm and fault avoidance mechanism to support reliable Internet connectivity. Finally the system architecture of a mobile router is given in detail.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7C
• /
• pp.677-684
• /
• 2002

Today's Internet does not have efficient traffic engineering mechanism to support QoS for the explosive increasing internet traffic such as various multimedia traffic. This functional shortage degrades prominently the quality of service, and makes it difficult to provide multi-media service and real-time service. Various technologies are under developed to solve these problems. IETF (Internet Engineering Task Force) developed the MPLS (Multi-Protocol Label Switching) technology that provides a good capabilities of traffic engineering and is independent layer 2 protocol, so MPLS is expected to be used in the Internet backbone network$\^$[1][2]/. The faults occurring in high-speed network such as MPLS, may cause massive data loss and degrade quality of service. So fast network restoration function is essential requirement. Because MPLS is independent to layer 2 protocol, the fault detection and reporting mechanism for restoration should also be independent to layer 2 protocol. In this paper, we present the experimental results of the MPLS OAM function for the performance monitoring and fault detection 'll'&'ll' notification, localization in MPLS network, based on the OPNET network simulator

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.1
• /
• pp.57-67
• /
• 2015

A large amount of work has been done in the areas of routing, MAC, QoS, capacity, location service, cooperative communication, fault tolerance, mobility models and various applications of mesh networks thanks to their merits of cost-effective way of deployment and flexibility in extending wireline services. Although multi-path routing protocols have been proposed to be used to provide QoS and fault-tolerance, there has not been any significant results discussed that support both in the literature to our best knowledge as they are often required in military and public safety applications. In this paper, we present a novel routing protocol for a mesh network based on the OFDM-TDMA collision-free MAC that discovers and maintains multiple paths that allows retransmitting and forwarding packets that have been blocked due to a link failure using an alternative next-hop node such that the delay-capacity tradeoff is reduced and the reliability is enhanced. Simulation results show that the proposed protocol performs well in terms of both the QoS and delivery ratio.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.4
• /
• pp.23-33
• /
• 2017

A great deal of study for loss reduction of photovoltaic system is conducted currently. It is hard to distinct the fault of photovoltaic system with the naked eye. For that reason, it is essential to repair and maintain the PV system by monitoring the system. The fault of individual modules can cause the huge loss of the entire system because of the mismatch. Therefore, the method of diagnosing the PV array is necessary by measuring the multi-channel arrays simultaneously. In this paper, it is presented the method of measuring I-V curve of multi-channel arrays simultaneously by using the charge and discharge characteristics of capacitor. Generated DC power at PV arrays is charged and discharged at the capacitors in a moment. By measuring the charged voltage and current, it is possible to diagnose of performance of PV arrays.

• Journal of the Korean Institute of Gas
• /
• v.23 no.4
• /
• pp.19-27
• /
• 2019

The consumption of liquefied natural gas (LNG) has increased annually due to the strengthening of international environmental regulations. In order to produce stable and efficient LNG, it is essential to divide the global (overall) operating condition and construct a quick and accurate monitoring system for each operation condition. In this study, multi-mode monitoring system is proposed to the LNG plant fractionation process. First, global normal operation data is divided to local (subdivide) normal operation data using global principal component analysis (PCA) and k-means clustering method. And then, the data to be analyzed were matched with the local normal mode. Finally, it is determined the state of process abnormality through the local PCA. The proposed method is applied to 45 fault case and it proved to be more than 5~10% efficient compared to the global PCA and univariate monitoring.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.411-416
• /
• 2006

Fault detection and diagnosis is the most important technology in condition-based maintenance(CBM) system that usually begins from collecting signatures of running machines using multiple sensors for subsequent accurate analysis. With the quick development in industry, there is an increasing requirement of selecting special sensors that are cheap, robust, and easy-installation. This paper experimentally investigated performances of four types of sensors used in induction motors faults diagnosis, which are vibration, current, voltage and flux. In addition, diagnostic effects of five popular classifiers also were evaluated. First, the raw signals from the four types of sensors are collected at the same time. Then the features are calculated from collected signals. Next, these features are classified through five classifiers using artificial intelligence techniques. Finally, conclusions are given based on the experiment results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.614-620
• /
• 2009

The force distribution in multi-legged robots is a constrained, optimization problem. The solution to the problem is the set points of the leg contact forces for a particular system task. In this paper, an efficient and general formulation of the force distribution problem is developed using linear programming. The considered walking robot is a quadruped robot with a locked-joint failure, i.e., a joint of the failed leg is locked at a known place. For overcoming the drawback of marginal stability in fault-tolerant gaits, we define safety margin on friction constraints as the objective function to be maximized. Dynamic features of locked-joint failure are represented by equality and inequality constraints of linear programming. Unlike the former study, our result can be applied to various forms of walking such as crab and turning gaits. Simulation results show the validity of the proposed scheme.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.3
• /
• pp.313-323
• /
• 2000

In this paper, we consider ring embedding problem on (n,k)-star graphs. We first present a new ring embedding strategy and also prove the superiority in expandability by showing its application into the fault-tolerant ring embedding problem with edge faults. This result can be applied to the multicating applications that use the underlying cycle properties on the multi-computer system.

• Journal of Information Processing Systems
• /
• v.7 no.3
• /
• pp.435-446
• /
• 2011

Microprocessors are becoming increasingly vulnerable to soft errors due to the current trends of semiconductor technology scaling. Traditional redundant multi-threading architectures provide perfect fault tolerance by re-executing all the computations. However, such a full re-execution technique significantly increases the verification workload on the processor resources, resulting in severe performance degradation. This paper presents a pro-active verification management approach to mitigate the verification workload to increase its performance with a minimal effect on overall reliability. An anomaly-speculation-based filter checker is proposed to guide a verification priority before the re-execution process starts. This technique is accomplished by exploiting a value similarity property, which is defined by a frequent occurrence of partially identical values. Based on the biased distribution of similarity distance measure, this paper investigates further application to exploit similar values for soft error tolerance with anomaly speculation. Extensive measurements prove that the majority of instructions produce values, which are different from the previous result value, only in a few bits. Experimental results show that the proposed scheme accelerates the processor to be 180% faster than traditional fully-fault-tolerant processor with a minimal impact on overall soft error rate.