• 한국소음진동공학회논문집
• /
• 제16권8호
• /
• pp.806-813
• /
• 2006

An important factor of vibration test using MAST(multi axial simulation table) system is the reliance of input excitation source. Generally the generation of input excitation source is obtained by the measured data on special road in proving ground. The measured data on special road have more exciting energy than the data of real fields, therefore the time and expense for test can be reduced. But the magnitude of input excitation source must be defined by comparison with the excited energy on real field. The object of this paper makes the data base of domestic roads for the definition of input excitation source which is obtained by the measured data on special road in proving ground. These real field data on domestic roads are analyzed by the power spectral density and interrelationship index.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.327-334
• /
• 2013

Purpose: The purpose of this study was to analyze for resonant frequency, vibration transmissibility and damping ratio of multi-layered corrugated structures using a random vibration test. Methods: The random vibration test was performed by the ASTM D4728 specifications using two paperboards (S120, K180) and two types of flutes (A/F, B/F). Damping ratio of the multi-layered corrugated structures was estimated using a theoretical equation derived from the measured resonant frequency and transmissibility. Results: The resonant frequency and vibration transmissibility of the multi-layered corrugated structures of K180 and B-flute were higher than those of S120 and A-flute, respectively; however, the damping ratio of each sample had the opposite tendency. The resonant frequency was inversely proportional to the sample thickness and static stress; vibration transmissibility and damping ratio were not correlated with sample thickness and static stress. In addition, we developed a mathematical model of the resonant frequency with variables of sample thickness and static stress. Conclusions: Results of this study can be useful for environment-friendly and optimal packaging design since vibration has been a key factor in cushioning packaging design.

• 한국수자원학회논문집
• /
• 제45권11호
• /
• pp.1131-1141
• /
• 2012

본 연구에서는 댐 용수공급능력에 영향을 미치는 요인들을 요인분석 통계기법을 사용하여 추출하였으며, 그 결과를 이용하여 댐 용수공급능력 추정을 위한 다중회귀모형을 개발하였다. 21개 다목적댐과 12개 생공용수전용댐을 대상으로 하였으며, 다목적댐과 생공용수전용댐으로 구분하여 요인분석을 수행하였다. 댐 용수공급능력에 영향을 미치는 변수로 유역면적, 유입량, 유효저수량, 생공용수량 등급, 농업용수량 등급, 하천유지유량 등급, 하천관리 등급, 평균강우량 등급을 선정하였다. 변수들의 상관계수 행렬점검, Bartlett의 구형성 점검, KMO 표본적합도 점검을 실시하여 변수들의 요인분석에 대한 적합성을 확인하였다. 변수들은 다목적댐의 경우 3개 요인, 생공용수전용댐의 경우 2개 요인으로 분류되었으며, 요인들을 Varimax법을 사용하여 회전시켰다. 요인분석 결과는 댐 용수공급능력에 영향을 미치는 변수들이 합리적으로 선정되었고, 이들이 요인으로 적절하게 분류되었음을 보여주었다. 요인점수를 설명변수로 사용하여 연간용수공급량을 추정할 수 있는 다중회귀모형을 개발하였으며, 개발된 모형의 정확성을 평가하고 적용방법을 제시하였다. 결론적으로 댐 용수공급능력에 영향을 미치는 것으로 파악된 변수 및 요인은 댐 계획 및 설계에 유용하게 활용될 수 있을 것으로 사료된다.

• 유통과학연구
• /
• 제12권9호
• /
• pp.95-99
• /
• 2014

Purpose - This study aims to develop and empirically test a multi-dimensional service convenience scale with the dimensions and measurement items of service convenience perceived by Korean consumers in retail contexts. Research design, data, and methodology - The study adopts the framework suggested by Berry et al. (2002) and conceptualizes service convenience as a second-order reflective construct comprising 31 items. Three department store chains (Hyundai, Lotte, and Shinsegae) and three discount store chains (E-mart, Homeplus, and Lotte Mart) were involved 510 valid responses were used for the empirical testing. Results - The measurement model is acceptable for internal consistency, convergent validity, and discriminant validity. Further, the structural model results show that service convenience is positively related to satisfaction. Results of the rival model comparison indicate that the proposed second-order factor model provides a better fit to the data than both the five-factor and the one-factor model. Conclusions - The multi-dimensional, second-order conceptualization of service convenience is robustly supported. This study provides psychometrically valid scales to measure service convenience in retail contexts as conceptualized by Berry et al. (2002).

• Structural Engineering and Mechanics
• /
• 제41권1호
• /
• pp.95-112
• /
• 2012

In order to analyze the experimental hysteretic behavior of the in-plane loaded reinforced grouted multi-ribbed aerated concrete blocks masonry walls (RGMACBMW), we have carried out the pseudo static testing on the six specimens of RGMACBMW. Based on the test results and shear failure characteristics, the shear force hysteretic curves and displacement envelope curves of the models were obtained and discussed. On the basis of the hysteretic curves a general skeleton curve of the shear force and displacement was formed. The restoring model was adopted to analyze the seismic behavior and earthquake response of RGMACBMW. The deformation capacity of the specimens was discussed, and the formulas for calculating the lateral stiffness of the walls at different loading stages were proposed as well. The average lateral displacement ductility factor of RGMACBMW calculated based on the test results was 3.16. This value illustrates that if the walls are appropriately designed, it can fully meet the seismic requirement of the structures. The quadri-linear restoring models of the walls degradation by the test results accurately reflect the hysteretic behaviors and skeleton curves of the masonry walls. The restoring model can be applied to the RGMACBMW structure in earthquake response analysis.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.877-883
• /
• 2019

Superconducting multi-spoke cavities are outstanding alternative choice for acceleration of heavy ions in medium velocity regimes. Based on the scheme of China ADS, several researches on the superconducting double-spoke cavities were done and two prototype cavities have been developed. In this paper, the RF design, the mechanical design and fabrication considerations of the bare cavity will be described in detail. After Buffered Chemical Polishing and High Pressure Rinsing, one of the prototype cavities was installed into the Vertical Test Stand for high gradient RF testing at 4.2 K. The measurement results of the quality factor as a function of the accelerating field and the maximum surface field will be presented. An accelerating gradient of more than 15 MV/m is achieved during the test, with maximum surface electric field of 58 MV/m, and maximum surface magnetic field of 117 mT.

• 한국의상디자인학회지
• /
• 제14권2호
• /
• pp.101-111
• /
• 2012

The purpose of this study is to evaluate the differences of visual image on variations in the length and princess line, in a silhouette of a one-piece dress with the application of the 3D Virtual Clothing System known as i-designer. Eight sample were examined: 2 variations of the length and 2 variations of the princess line, 2 variations of the form of a silhouette. The data was obtained from 66 fashion design majors. The data was assessed by a t-test and a multi-way ANOVA and factor analysis. The results were as follows; The visual image according to the design variables, four factors were selected; the attractiveness factor, the activeness factor, the practicality factor, the elegance factor. In these factors, the attractiveness factor is estimated by the most important factor. As a result of analyzing the effect of the interaction in the visual image according to the design variables, the influence of the main effect was found to be great in each factor. In the activeness factor, a significant difference was noted in the two-way interaction between the length and the princess line, the length and the silhouette. In the elegance factor, a significant difference was noted in the two-way interaction between the length and the silhouette. However, the influence on three-way interaction among the length, the princess line, and the silhouette was not significant.

• 콘크리트학회논문집
• /
• 제17권1호
• /
• pp.149-155
• /
• 2005

The purpose of this study is to investigate the flexural strengthening effects of CF(Carbon Fiber) sheet for the full-scale RC beams with multi-layer CF sheets. The partial strength reduction factors of CF sheets are suggested from the full-scale RC beams tests strengthened with multi-layer CF sheets up to six layers as well as material tests. From the material tensile tests, it was observed that the average tensile strengths of CF sheets per layer are decreased as the number of CF sheets is increased. Also the steep strength reductions of CF sheets in material test results at rupture are observed compared with the structural tests results for the full-scale RC beams strengthened with multi-layer CF sheets. Finally, the partial strength reduction factors far CF sheets up to six layers are suggested considering the effects of multi-layer and unit weight of CF sheets.

• 한국실내디자인학회논문집
• /
• 제27권1호
• /
• pp.80-87
• /
• 2018

This study aims to find gender differences in inpatients' privacy and stress concerns in multi-bed hospital room. In the literature review, we consider the characteristics of multi-bed hospital room and patients' privacy as a psychological environment factor. In the survey research, the questionnaires were used to understand the inpatients' general characteristics and privacy requirements. A total of 109 copies were analyzed through a cross-tabulations and T-test using the SPSS 18.0. Results and conclusions are as follows: (1) In the case of multi-bed room patients, there were some gender differences in privacy and stress, but the differences were limited. (2) There is a difference in the patient 's preference of the hospital room according to gender, and this is related to the privacy characteristic. (3) The social communication and strolling are commonly effective stress relief methods for both men and women, so space is needed to do this methods. The meaning of this study is to specify the privacy and stress of the inpatients in multi-bed patients' room.

• 한국의류학회지
• /
• 제38권2호
• /
• pp.277-292
• /
• 2014

This study investigated consumers' multi-channel behavior for fashion product purchases and compared perceived risks by channel type. A survey involving male and female college students was conducted in the Daegu and Gyungbuk area in December 2013. A total of 400 responses were analyzed using descriptive statistics, chi-square analysis, independent sample t-test, paired t-test, factor analysis, and reliability analysis. An internet shopping mall was the most frequently chosen retailer type for fashion product purchases and information searches. In addition, respondents also preferred independent branded stores, department stores, and non-branded stores. The number of retailer types for clothing item purchases ranged from 1 to 6 and the average was 3.06. The number of retailer types was significantly higher in women groups according to gender variables. Perceived risk had the highest evaluation score for internet shopping malls. Department stores were recognized as a reliable retailer type. The construct of perceived risk was shown as similar in off-line stores such as department stores, independent branded stores, and non-branded stores. Instead, the construct was differentiated from the case of internet shopping malls. Some insightful suggestions were suggested for future research and industrial marketing plans based on the results.