• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.3
• /
• pp.192-200
• /
• 2009

Soil testing is one of the best management practices for sustainable agriculture. Recently, as increasing soil testing needs, simplification of soil analytical procedure has been required. To determine recommendable multi-element extractant, the soil testing results of available phosphate and exchangeable cations between the conventional methods (Lancaster and 1M $NH_4OAc) and multi-element extraction methods such as Mehlich III, Modified Morgan and Kelowna methods were compared. There were highly significant correlation between the conventional methods and multi-element extraction methods (Mehlich III, Modified Morgan and Kelowna) for available phosphate and exchangeable K, Ca, Mg and Na. The coefficients of determination ($R^2) between available phosphate extracted by Lancaster method and multielement extraction methods were in the order of Mehlich III ($0.979^{***}$) > Kelowna ($0.977^{***}$) > Modified(Mod.). Morgan ($0.553^{***}$). For exchangeable cations, there were highly significant correlations between 1M $NH_4OAc method and Mehlich III, Mod. Morgan and Kelowna. However, exchangeable K, Ca and Mg by Mehlich III method were more highly correlated with conventional method than other methods. Therefore, Mehlich III extraction method could be recommended as a single extractant for simultaneous measurement using ICP in the analysis of avaliable phosphate and exchangeable cations.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.1
• /
• pp.8-13
• /
• 2011

A compact array system of small buoys is used for wave energy extraction. To evaluate the performance of this system, hydrodynamic analysis is carried out in regular waves using the higher order boundary element method. The motion response of each buoy is calculated considering hydrodynamic interactions caused by other buoys. The effect of energy extraction device is modeled as a linear damping load. The efficiencies of energy conversion are compared using the various sizes and arrangements of the array system and the damping coefficients for energy extraction. The increase in size or the packing ratio of the system gives better efficiency. However, the wave condition and the cost for the system should be considered to optimize performance from the perspective of engineering and economics. The proposed nondimensionalized damping coefficient for energy extraction is 0.1~0.5.

• Journal of Convergence for Information Technology
• /
• v.11 no.2
• /
• pp.41-46
• /
• 2021

The method of the edge detection algorithm based on grayscale mathematical morphology has the advantage that image noise can be removed and processed in parallel, and the operation speed is fast. However, the method of detecting the edge of an image using a single structural scale element may be affected by image information. The characteristics of grayscale morphology may be limited to the edge information result of the operation result by repeatedly performing expansion, erosion, opening, and containment operations by repeating structural elements. In this paper, we propose an edge detection algorithm that applies a structural element with strong directionality to noise and then applies weighted entropy to each pixel information in the element. The result of applying the multi-scale structural element applied to the image and the result of applying the directional weighted entropy were compared and analyzed, and the simulation result showed that the proposed algorithm is superior in edge detection.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1224-1230
• /
• 2007

In this paper, we study the classification of defects at steam generator tube in nuclear power plant using eddy current testing (ECT). We consider 4 defect patterns of SG tube: I-In type, I-Out type, V-In type, and V-Out type. Through numerical analysis program based on finite element modeling, 400 ECT signals are generated by varying width and depth of each defect type. In order to improve the classification performance, we propose new feature extraction technique. After extracting new features from the generated ECT signals, multi-layer perceptron is used to classify the defect patterns. Through the computer simulation study, it is shown that the proposed method achieves 100% classification success rate while the previous method yields 91% success rate.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.293-302
• /
• 2019

In mountain accident events, it is important for the search team commander to determine the search area in order to secure the Golden Time. Within this period, assistance and treatment to the concerned individual will most likely prevent further injuries and harm. This paper proposes a method to determine the search priority area based on missing persons behavior and missing persons incidents statistics. GIS (Geographic Information System) and MCDM (Multi Criteria Decision Making) are integrated by applying WLC (Weighted Linear Combination) techniques. Missing persons were classified into five types, and their behavioral characteristics were analyzed to extract seven geographic analysis factors. Next, index values were set up for each missing person and element according to the behavioral characteristics, and the raster data generated by multiplying the weight of each element are superimposed to define models to select search priority areas, where each weight is calculated from the AHP (Analytical Hierarchy Process) through a pairwise comparison method obtained from search operation experts. Finally, the model generated in this study was applied to a missing person case through a virtual missing scenario, the priority area was selected, and the behavioral characteristics and topographical characteristics of the missing persons were compared with the selected area. The resulting analysis results were verified by mountain rescue experts as 'appropriate' in terms of the behavior analysis, analysis factor extraction, experimental process, and results for the missing persons.

• Economic and Environmental Geology
• /
• v.27 no.5
• /
• pp.469-477
• /
• 1994

Many researchers have investigated most representative sequential extraction method using various reagents for determining the chemical forms of metals in soils and sediments. In this paper, a newly modified method for sequential extraction scheme based on Tessier's method by Environmental Geochemistry Research, Centre for Environmental Technology, Imperial College, was introduced and examined. In comparison with Tessier's method, originally designed for sediment analysis by Atomic Absorption Spectrophotometry (AAS), the sequential extraction scheme has been developed for the multi-element analysis by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). The partitioning of particulate trace elements was classified into five fractions: (i) exchangeable, (ii) bound to carbonates or specially adsorbed, (iii) bound to Fe and Mn oxides, (iv) bound to organic matter and sulphides and (v) residuals. The experimental results of the pilot study for in-house reference material (HRM2) and certified international standard reference material (SRM2711) using the modified method showed not only reasonable precision and accuracy but also acceptable overall recovery rates. In addition, mine dump soils sampled in the Dalsung Cu-W mine, Korea were prepared and sequentially extracted using the method. Most of Cu was bound to organic matter/sulphides and residual fractions. The dominant fraction of soil Pb and Zn in the study area was found in the residuals. The fraction of Cd showed a wide variation between samples and could be found bound to the carbonates or specially adsorbed, oxides, organic fraction and residuals. The recovery rates of Cd, however, were poor due to relatively low Cd concentrations in soils. The heavy metals in these mine dumps appear to be in the more inert forms and should not be readily bioavailable. The soils, however, had very low pH values (average 4.1) and had sandy textures; consequently, rapid infiltration of rainfall may increase leaching of Zn and Cd which were found to be around 5 to 10% of the exchangeable fraction. As a result of the investigation of this study, it has been strongly recommended that these mine waste materials should still be considered a significant contaminant source and will need environmental remediation to prevent pollutants from being released into the environment.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.357-360
• /
• 2007

Efficient extraction and update of imagery is a crucial element in establishing latest geospatial information in today's fast changing Information society. Provision of Quick Bird imagery, with 61cm resolution panchromatic imagery and 2.5m resolution multi-chromatic imagery is contributing greatly in the application field if high density geospatial information. This research have conducted digital plotting utilizing stereo images provided by QuickBird satellite and evaluated the accuracy through comparison and analysis with digital map results. It turned out that result has smaller error than standard deviation of scale of 1:5,000 set by the NGII. This proves that the production of digital map at scale of 1:5,000 is possible.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.375-379
• /
• 1990

A microprocessor-based multi-function switchgear for the protection, measurement and control of the power system is presented. For the extraction of the RMS values of the fundamental components of current and voltage signals, a simple digital filter based on cross-correlation of the distorted signal with even and odd heptagonal waves is used. The frequency response of this filter is almost identical to that of the filter based on the discrete fourier transform, while its computational requirement is far less. For the time delay element relaying, a new log-table based relaying algorithm is suggested. The suggested use of the heptagonal wave cross-correlation digital filter algorithm and a new relaying algorithm reduce the computational needs so drastically that all functions of the switchgear can be implemented on the microprocessor system. Real time testing of the implemented daboratory prototype show good practical response under different operating conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.730-738
• /
• 2009

In this paper, we present a equivalent circuit considered parasitic elements about LTCC multi-layer BPF structure that was studied previously and a process of extraction of the element value using SOC technique. By applying extracted element values to equivalent circuit, 2th LTCC filter was designed and fabricated that was applied to satellite DMB. The filter was fabricated of Dupont951 substrate with relative permittivity of 7.8, the dimension of the fabricated filter is $2.4{\times}3.8{\times}0.378mm^3$. The measurement results indicate 1.4 dB of insertion loss and 32.3 dB of return loss, which are in good agreement with simulated ones.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.8
• /
• pp.114-120
• /
• 2008

In this paper, we extract the parasitic elements of the metal-insulate-metal(MIM) capacitor using short-open calibration (SOC). The scattering matrixes of short, open, and MIM structures in strip lines are measured by full electro-magnetic (EM) simulator and vector network analyser. The full EM simulations are performed by finite element method (FEM) that was fitted three dimensional structure analysis. The electro-magnetic effects of MIM capacitor laminated in the multi-layered structures are proposed the II equivalent circuit with lumped elements, and the relations between the measured scattering parameters of the MIM structures and lumped elements in the circuits are shown by performing 2 port network analysis. The extracted lumped elements using the proposed SOC method are independent to frequencies.