• Title/Summary/Keyword: Multi-device environment

검색결과 245건 처리시간 0.025초

모바일 기반 온실 냉난방 부하 산정 프로그램 개발 (Development of Greenhouse Cooling and Heating Load Calculation Program Based on Mobile)

  • 문종필;방지웅;황정수;장재경;윤성욱
    • 생물환경조절학회지
    • /
    • 제30권4호
    • /
    • pp.419-428
    • /
    • 2021
  • 모바일 기반 온실에너지 계산프로그램을 제작하기 위해 먼저 주요 단일 피복재 10종 및 보온재 16종에 대한 열관류율 측정하였다. 또한 피복 및 보온재를 이중 및 삼중으로 다층 설치할 때 열관류율 추정을 위하여 이중 설치시 24조합, 삼중설치 시 59조합에 대한 열관류율을 핫박스를 이용하여 측정하였다. 단일 피복재에서는 PE필름(0.08mm) 대비 PO필름(0.15mm)이 가장 열관류율이 가장 작고 열절감율이 가장 큰 것으로 나타났다. 단일 보온재에서는 열관류율에서는 외피가 있는 5겹의 다겹보온커튼이 가장 보온력이 좋은 것으로 나타났다. 또한 단일자재에 대한 열관류율 값과 열저항값을 이용한 피복 및 보온재의 다층설치시의 총 열관류율 값을 산정하였고 실측 값과의 오차를 보정하는 선형회귀식을 도출하였다. 단일재료의 열관류율값에 의한 피복 및 보온재의 다층설치시 열관류율 추정 모형을 개발한 결과 모형평가지수가 0.90(0.5 이상일 때 양호)으로 나타나 추정치가 실측치를 매우 잘 재현 하고 있는 것으로 나타났다. 또한 시험온실을 통한 실증시험결과 예측된 열절감율이 실측치보다 상대오차 2%로 작게 나타나는 것으로 평가되었다. 이러한 연구결과를 기반으로 모바일 기반의 온실 에너지계산 프로그램을 개발하였다. 이 프로그램은 HTML5 표준 웹 기반 모바일 웹 애플리케이션으로 구현하였으며 N-Screen 지원을 통해 다양한 모바일 장치 및 PC 브라우저에서 동작이 가능하게 제작되었다. 또한 온실 피복(12종) 및 보온재(16종)의 조합별 열관류율 및 난방부하계수를 제공하여 농민이 모바일로 온실 위치, 형태 및 피복·보온재 등을 반영한 최대 주야간 냉난방부하 및 기간 난방부하를 산정할 수 있다. 대상 온실의 에너지 소비량에 대한 평가가 가능하며 온실의 지역 및 형태에 따라 피복 및 보온재의 최적 선택으로 에너지 절감형 온실 설계가 가능할 것으로 판단되었다.

세기조절방사선치료의 환자별 정도관리를 위한 2차원적 선량계의 유용성 평가 (Comparison of the Efficacy of 2D Dosimetry Systems in the Pre-treatment Verification of IMRT)

  • 홍채선;임종수;주상규;신은혁;한영이;안용찬
    • Radiation Oncology Journal
    • /
    • 제27권2호
    • /
    • pp.91-102
    • /
    • 2009
  • 목 적: 세기조절방사선치료에 있어서 치료 전 환자별 정도관리(QA)에 사용하는 EDR2 필름과 2차원 이온전리함배열(MatriXX), 그리고 전자포탈영상장치(EPID)에 대해 절대선량계와 상대선량계로서의 정확도와 효율성을 평가했다. 대상 및 방법: 6 MV X-선을 이용하여 두 가지 유형(기준 조사면, 오차 평가 조사면)의 세기조절 조사면을 설계하고 EDR2 필름, MatriXX, EPID를 사용하여 절대선량과 상대적 선량분포를 비교, 분석했다. 세 시스템의 절대선량 정확성을 평가하기 위해 세 시스템의 선량 측정값과 전리함 측정값을 비교했고, 상대적 선량분포 평가를 위해 기준 조사면과 의도적으로 MLC leaf 위치를 변형시킨 오차 평가 조사면에서 감마($\gamma$)값과 조사면 수직 프로파일을 분석했다. 또한, 환자별 QA 전 과정을 수행하는데 소요되는 시간을 측정하여 시스템에 따른 업무 부하를 비교했다. 결 과: EDR2 필름, MatriXX, 그리고 EPID의 절대선량 측정값과 전리함 측정값을 비교한 결과 EPID는 1%, MatriXX는 2%, EDR2 필름은 3% 이내의 오차 측정 정확도를 보였다. EDR2 필름과 EPID는 허용기준 3%/3 mm와 2%/2 mm 모두에서 감마값이 1을 초과하는 화소($\gamma$%>1)가 전체 화소의 2% 이내였다. 그러나 MatriXX의 경우 3%/3 mm에서는 1% 이내의 오차를 보였으나 2%/2 mm를 적용한 $10\times20\;cm^2$$10\times10\;cm^2$에서는 각각 5.94%와 4.95%로 증가했다. 세 시스템으로부터 얻은 오차 평가 조사면의 선량 분포를 치료계획 장치로부터 얻은 기준 조사면과 중첩하여 감마 분석한 결과, 3%/3 mm에서 EDR2 필름이 -4 mm의 MLC leaf 오차 식별이 가능했고 EPID는 -3 mm 오차를 감지했다. 2%/2 mm의 경우, EDR2 필름과 EPID에서 각각 -3 mm와 -2 mm의 오차 식별이 가능했다. 그러나 MatriXX의 경우 경계가 불분명해 오차 구분이 어려웠다. 환자별 QA 전 과정을 수행하는데 소요되는 시간은 EDR2 필름이 약 110분, MatriXX가 약 80분, EPID가 약 55분이었다. 결 론: 본 연구는 IMRT의 치료 전 환자별 QA를 위한 EDR2 필름, MatriXX, 그리고 EPID의 측정 정확도와 효율성을 분석했다. EDR2 필름과 EPID는 선량 측정 정확도가 우수했으며, MatriXX는 측정 시간이 짧았다. 본 연구 결과는 임상에서 효율적인 IMRT QA 시스템을 구축하는데 좋은 자료가 될 것으로 생각한다.

중학교 "환경" 교과의 교수.학습 및 평가 방법 연구 (A Study on Teaching-Learning and Evaluation Methods of Environmental Studies in the Middle School)

  • 남상준
    • 한국환경교육학회지:환경교육
    • /
    • 제7권1호
    • /
    • pp.1-17
    • /
    • 1994
  • This study was performed to determine appropriate teaching-learning and evaluation methods for Environmental Studies. To promote the relevance of our study to the needs of the schools and concerned educational communities of environmental education, we reviewed related literature, conducted questionnaire surveys, interviewed related teachers and administrator, held meetings with experts, and field-tested our findings. For selecting and developing teaching-learning methods of Environmental Studies, findings of educational research in general are considered. moreover, principles of environmental education, general aim of environmental education, orientations of environmental education, and developmental stages of middle school students in educational psychology were attended. In addition, relevance to the purpose of the Environmental Studies curriculum, appropriateness for value inquiry as well as knowledge inquiry, small group centered class organization, social interaction centered teaching-learning process, regional environmental situation, significance of personal environment, evaluation methods of Environmental Studies, multi- and inter-disciplinary contents of the Environmental Studies textbook, suitability to the evaluation methods of Environmental Studies, and emphasis on the social interaction in teaching-learning process were regarded. It was learned the Environmental Studies can be taught most effectively in via of holding discussion sessions, conducting actual investigation, doing experiment-practice, doing games and plate, role-playing and carrying out simulation activities, and doing inquiry. These teaching-learning methods were field-tested and proved appropriate methods for the subject. For selecting and developing evaluation method of Environmental Studies, such principles and characteristics of Environmental Studies as objective domains stated in the Environmental Studies curriculum, diversity of teaching-learning organization, were appreciated. We categorized nine evaluation methods: the teacher may conduct questionnaire surveys, testings, interviews, non-participatory observations; they may evaluate student's experiment-practice performances, reports preparation ability, ability to establish a research project, the teacher may ask the students to conduct a self-evaluation, or reciprocal evaluation. To maximize the effect of these methods, we further developed an application system. It considered three variables, that is, evaluates, evaluation objectives domains, and evaluation agent, and showed how to choose the most appropriate methods and, when necessary, how to combine uses of different methods depending on these variables. A sample evaluation instrument made on the basis of this application system was developed and tested in the classes. The system proved effective. Pilot applications of the teaching-learning methods and evaluation method were made simultaneously; and the results and their implications are as follows. Discussion program was applied in a lesson dealing with the problems of waste disposal, in which students showed active participation and creative thinking. The evaluation method used in this lesson was a multiple-choice written test for knowledge and skills. It was shown that this evaluation method and device are effective in helping students' revision of the lesson and in stimulating their creative interpretations and responces. Pupils showed great interests in the actual investigation program, and this programme was proved to be effective in enhancing students' participation. However, it was also turned out that there must be pre-arranged plans for the objects, contents and procedures of survey if this program is to effective. In this lesson, non-participatory observation methods were used with a focus on the attitudes of students. A scaled reported in general description rather than in grade. Experiment-practice programme was adopted in a lesson for purifying contaminated water and in this lesson, instruction objectives were properly established, the teaching-learning process was clearly specified and students were highly motivated. On the other hand, however, it was difficult to control the class when some groups of students require more times to complete their experiment, and sometimes different results. As regards to evaluation, performance observation test were used for assessing skills and attitudes. If teachers use well-prepared Likert scale, evaluation of all groups within a reasonablely short period of time will be possible. The most effective and successful programme in therms of students' participation and enjoyment, was the 'ah-nah-bah-dah-market' program, which is kind of game of the flea market. For better organized program of this kind, however, are essential, In this program, students appraise their own attitudes and behavior by responding to a written questionnaire. In addition, students were asked to record any anecdotes relating to self-appraisal of changes on one's own attitudes and behaviours. Even after the lesson, students keep recording those changes on letters to herself. Role-playing and simulation game programme was applied to a case of 'NIMBY', in which students should decide where to located a refuse dumping ground. For this kind of programme to e successful, concepts and words used in the script should be appropriate for students' intellectual levels, and students should by adequately introduced into the objective and the procedures of the lessons. Written questionnaire was used to assess individual students' attitudes after the lesson, but in order to acquire information on the changes of students' attitudes and skills, pre-test may have to be made. Doing inquiry programme, in which advantages in which students actually investigated the environmental influence of the areas where school os located, had advantages in developing students' ability to study the environmental problems and to present the results of their studies. For this programme to be more efficient, areas of investigation should be clearly divided and alloted to each group so that repetition or overlap in areas of study and presentation be avoided, and complementary wok between groups bee enhanced. In this programme, teacher assessed students' knowledge and attitudes on the basis of reports prepared by each group. However, there were found some difficults in assessing students' attitudes and behaviours solely on the grounds of written report. Perhaps, using a scaled checklist assessing students' attitudes while their presentation could help to relieve the difficulties.

  • PDF

기계경비시스템의 기술 변화추세와 개발전망 (Trend and future prospect on the development of technology for electronic security system)

  • 정태황;서승영
    • 시큐리티연구
    • /
    • 제19호
    • /
    • pp.225-244
    • /
    • 2009
  • 기계경비시스템은 대부분 전자 정보 통신 기기로 구성되어 있기 때문에 정보통신환경의 변화는 기계경비시스템의 기술, 운영체계, 운영방법 등에 영향을 미치게 된다. 본 연구는 기계경비시스템의 기술개발 동향 및 실태를 분석하고 기술개발 전망을 제시하는데 있다. 본 연구는 문헌연구와 기계경비시스템을 사용하는 수요자와 공급자와의 면담을 통한 분석과, 기술개발업자와 시스템 설치 기술자를 대상으로 한 설문조사를 통해 분석결과에 대한 검증을 실시하였다. 국제적으로 경쟁력이 있는 DVR 기술은 본래의 기능인 영상녹화 기능을 위주로 Motion Detection 기능과 상황변화 인식 기능, 목표물 추적 기능 등과 같은 다양한 기능을 수행할 수 있는 하이브리드 DVR 기술개발 쪽으로 진행될 것이며, 상황변화를 인식할 수 있는 기술은 현장에 설치된 많은 카메라를 소수의 인원이 효과적으로 감시할 수 있게 하여 기존의 CCTV시스템의 기능을 보다 향상시킬 수 있을 것이다. 그리고 영상전송기능을 수행하는 인터넷 서버기술과 영상인식 소프트웨어가 카메라에 내장된 'Embedded IP카메라' 기술개발은 CCTV시스템의 구성체계를 보다 간소화 시킬 수 있을 것이다. 생체인식 중 지문인식기술과 얼굴인식기술은 국제적인 경쟁력을 가지고 기술개발이 진행되지만 얼굴인식기술은 인식기술에 있어서는 선진국과 비슷한 수준인 것으로 평가되고 있으나 인식거리를 확보하는 기술과 감시 기능, 3D인식 기술부분에 있어 다소 신뢰성이 떨어져 이를 보완하기 위한 지속적인 개발이 이루어질 것이다. RFID의 무선인식과 추적기능은 사람 또는 차량의 출입통제나 물품의 반입 반출의 감시 통제 등을 위해 유용하게 적용될 것으로 평가되고 있어 RFID의 하드웨어와 소프트웨어 기술개발이 활발하게 진행될 것으로 전망되지만 시장여건과 새로운 제품 도입을 꺼리고 수입 의존도가 높은 현상을 개선하기 위하여 개발된 제품을 사용할 수 있는 여건 조성 등 기술개발을 촉진하기 위한 적극적인 지원이 필요한 것으로 분석된다. 행동패턴을 인식하여 침입상황을 감지하는 센서기술은 기존의 오작동이 많은 공간감지 센서를 대신하여 경보신호의 신뢰도를 향상시켜 자신있는 현장대응을 가능하게 해줄 수 있는 기술로 적극적으로 개발이 이루어질 것으로 전망된다. 행동패턴인식기술과 영상변화를 탐지하고 분석하는 영상인식기술은 유사한 기술로 서로 연계될 수 있으며, 경보신호전송 기술, 영상추적기술, RFID의 무선인식 및 추적 기술, 그리고 이를 관리하기 위한 미들웨어 기술을 통합하여 이상상황에 보다 효과적으로 대응할 수 있는 통합관제시스템을 구축할 수 있을 것이다.

  • PDF

단추에 관한 연구 -19, 20세기를 중심으로- (The Study on the Buttons (centering around 19th-20th Centuries))

  • 이영란
    • 복식
    • /
    • 제22권
    • /
    • pp.263-276
    • /
    • 1994
  • The achievement of notable social reoforms attained during the period of 19th and 20th centuries needlessly speaking remodelded the social environmental into several different patterns such as :1) high industrialization 2) propensity to consume 3) up graded overall social stands. Accordingly the industrial world of the but-tons too established the mess production syhstem by breaking from convention of hand-craft work of 17th century. The raw materials used in the production line on buttons during the 20th century are almost all-kind of materials one can possibly named including cheap plastic which enabled production lines to produce cheaper but higher productivities of the buttons being produced, The design (incused design) used in the 19-20h centuries are : men landscape, sports features, birds, livestocks, bugs, or geomatric features, tec, 1, The classification o f the buttons by materials Techniques shapes colors marking (Incused design) used in the productionof buttons in the England United States of America Laska Italy france Denmark Japan and India are categolizzed as : natural raw materials and syntetical resines. 1) Of the natural raw materials used are : Matal Enamel Iodine Agate, Coral, Green jade(Jasper) Granite, Wood, Ivory, Horn and bone etc. 2) The sythetical resin used in the button in-dustries are : Artificial jewell glass Acrylic material Styroform Celluloid and Nylon etc. 2. The thecnique quoted in producing buttons are hand craft work inlay work precision casting press mosic dye etching, processing, engraving and embossed carving etc. 3. The major designs used in the buttons in -dustries are : Round shape however elliptical column angular and edge shape often used. 4. The colors used are : The multi-colors were highly used than mono-colored materials such as : Adjoining Color and Contrast Color. The highest consideration to be considered in choosing the colors for the buttons are harmonization and matching factor with the garment or dresses to be wore. 5. The major design(incused design) on the buttons are embodiment and the design were also used in order of abstractive-combination abstractive with has offers much surprising. The button industries during the 19th and 20th centuries were not only the determination factors those can judge the value of self-pride of Nation and which were far beyond the in-dustrial arts in those days but also highly refelected and influenced by cultural sense ideology and self-pride of the Nation of those period. The followings are details of the role of the buttons categolized in the order of functional ornamental and symbolical aspects : 1. The functional role : The functional role of the buttons were simply designed for dress how-ever the buttons beyond from this role of function now a days. 2. The ornamental role : The ornamental role of he button beyond from this role of the button were effectuated by : 1) shape materials colors 2) technique locations size and design (incused design) 3) The ramaterials used for buttons shall not be over looked because it is highly depends on the taste sense and combination of harmony with the garment to be wore. 4) The color of the buttons are made well contrasted with the color of garments just as in the case of other artistical area such as matchs with the color of garment of contrast with brigtness of colors contrasted as complementary color and so and so. 5) The technique being adoped are: precision casting press handcraft inlay work etching mosic etc,. Since the buttons are no longer a simple catching devise used to fasten together the different part of the dress but now it has formed own and occupied the independent role in the garment or dresses location can be de-termined and varying depending on the ideas of designers. The size of the buttons has no specific limits, However the variation has widely dependined on the entire circumperence rhythm contrast harmonization of the garments. 3. The symbolical role : Since the button is no longer a just a simple devise for catching and fastening device used fastening together the different part of the garments but now were built a independent area as major part of the Garment and well reflected all kinds of occupations political background cultural as-pect etc. on the buttons. The design of buttons in the western circles are more simplified but they are polished looks and their techniques of manufacturing are comination of both machanis and handcraft. The colors used in the buttons are pretty well harmonized with garment(dress). Almost all kind of materials can be used in the but-tons however materials used in the buttons are : Bone of livestocks ivory, turtle shell are no longer used because the prevention of cruely of animal. On the contraly the level of buttons indus-try of Korea is far to reach and catch up with the level of western circles. It is highly suggested therefore the but-tons industrial field of Republic of Korea shall place and encouragement in producing beter industrial environment of the buttons based on the traditional and cultural aspect of republic of Korea to produce both manufacturing of qulified and best designed and colored buttons.

  • PDF