• 제목/요약/키워드: Multi-device

검색결과 1,593건 처리시간 0.031초

가정산소치료의 보험급여 실시 이후 처방 실태: 다기관 조사 -만성기도폐쇄성질환 임상연구센터 제3세부과제 만성기도폐쇄성질환 진료지침 개발/보급 연구- (Long-term Oxygen Therapy for Chronic Respiratory Insufficiency: the Situation in Korea after the Health Insurance Coverage: a Multi-center Korean Survey -Study for the Development and Dissemination of the COPD Guidelines, Clinical Research Center for Chronic Obstructive Airway Disease-)

  • 박명재;유지홍;최천웅;김영균;윤형규;강경호;이승룡;최혜숙;이관호;이진화;임성철;김유일;신동호;김태형;정기석;박용범
    • Tuberculosis and Respiratory Diseases
    • /
    • 제67권2호
    • /
    • pp.88-94
    • /
    • 2009
  • Background: From November 2006, The national health insurance system in the Republic of Korea began to cover prescribed long-term oxygen therapy (LTOT) in patients with chronic respiratory insufficiency. This study examined the current status of LTOT after national health insurance coverage. Methods: Between November 1, 2006 and June 30, 2008, the medical records of patients who were prescribed LTOT by chest physicians were reviewed. The data was collected from 13 university hospitals. Results: 197 patients (131 male and 66 female) were prescribed LTOT. The mean age was 64.3${\pm}$13.0 years. The most common underlying disease was chronic obstructive pulmonary disease (n=103, 52.3%). Chest physicians prescribed LTOT using arterial blood gas analysis or a pulse oxymeter (74.6%), symptoms (14%), or a pulmonary function test (11.2%). The mean oxygen flow rate was 1.56${\pm}$0.68 L/min at rest, 2.08${\pm}$0.91 L/min during exercise or 1.51${\pm}$0.75 L/min during sleep. Most patients (98.3%) used oxygen concentrators. Only 19% of patients used ambulatory oxygen supplies. The oxygen saturation before and after LTOT was 83.18${\pm}$10.48% and 91.64${\pm}$7.1%, respectively. After LTOT, dyspnea improved in 81.2% of patients. The mean duration of LTOT was 16.85${\pm}$6.71 hours/day. The rental cost for the oxygen concentrator and related electricity charges were 48,414${\pm}$15,618 won/month and 40,352${\pm}$36,815 won/month, respectively. Approximately 75% of patients had a regular visit by the company. 5.8% of patients had personal pulse oxymetry. 54.9% of patients had their oxygen saturation checked on each visit hospital. 8% of patients were current smokers. The most common complaint with LTOT was the limitation of daily activity (53%). The most common complaint with oxygen concentrators was noise (41%). Conclusion: The patients showed good compliance with LTOT. However, only a few patients used an ambulatory oxygen device or had their oxygen saturation measured.

중학교 "환경" 교과의 교수.학습 및 평가 방법 연구 (A Study on Teaching-Learning and Evaluation Methods of Environmental Studies in the Middle School)

  • 남상준
    • 한국환경교육학회지:환경교육
    • /
    • 제7권1호
    • /
    • pp.1-17
    • /
    • 1994
  • This study was performed to determine appropriate teaching-learning and evaluation methods for Environmental Studies. To promote the relevance of our study to the needs of the schools and concerned educational communities of environmental education, we reviewed related literature, conducted questionnaire surveys, interviewed related teachers and administrator, held meetings with experts, and field-tested our findings. For selecting and developing teaching-learning methods of Environmental Studies, findings of educational research in general are considered. moreover, principles of environmental education, general aim of environmental education, orientations of environmental education, and developmental stages of middle school students in educational psychology were attended. In addition, relevance to the purpose of the Environmental Studies curriculum, appropriateness for value inquiry as well as knowledge inquiry, small group centered class organization, social interaction centered teaching-learning process, regional environmental situation, significance of personal environment, evaluation methods of Environmental Studies, multi- and inter-disciplinary contents of the Environmental Studies textbook, suitability to the evaluation methods of Environmental Studies, and emphasis on the social interaction in teaching-learning process were regarded. It was learned the Environmental Studies can be taught most effectively in via of holding discussion sessions, conducting actual investigation, doing experiment-practice, doing games and plate, role-playing and carrying out simulation activities, and doing inquiry. These teaching-learning methods were field-tested and proved appropriate methods for the subject. For selecting and developing evaluation method of Environmental Studies, such principles and characteristics of Environmental Studies as objective domains stated in the Environmental Studies curriculum, diversity of teaching-learning organization, were appreciated. We categorized nine evaluation methods: the teacher may conduct questionnaire surveys, testings, interviews, non-participatory observations; they may evaluate student's experiment-practice performances, reports preparation ability, ability to establish a research project, the teacher may ask the students to conduct a self-evaluation, or reciprocal evaluation. To maximize the effect of these methods, we further developed an application system. It considered three variables, that is, evaluates, evaluation objectives domains, and evaluation agent, and showed how to choose the most appropriate methods and, when necessary, how to combine uses of different methods depending on these variables. A sample evaluation instrument made on the basis of this application system was developed and tested in the classes. The system proved effective. Pilot applications of the teaching-learning methods and evaluation method were made simultaneously; and the results and their implications are as follows. Discussion program was applied in a lesson dealing with the problems of waste disposal, in which students showed active participation and creative thinking. The evaluation method used in this lesson was a multiple-choice written test for knowledge and skills. It was shown that this evaluation method and device are effective in helping students' revision of the lesson and in stimulating their creative interpretations and responces. Pupils showed great interests in the actual investigation program, and this programme was proved to be effective in enhancing students' participation. However, it was also turned out that there must be pre-arranged plans for the objects, contents and procedures of survey if this program is to effective. In this lesson, non-participatory observation methods were used with a focus on the attitudes of students. A scaled reported in general description rather than in grade. Experiment-practice programme was adopted in a lesson for purifying contaminated water and in this lesson, instruction objectives were properly established, the teaching-learning process was clearly specified and students were highly motivated. On the other hand, however, it was difficult to control the class when some groups of students require more times to complete their experiment, and sometimes different results. As regards to evaluation, performance observation test were used for assessing skills and attitudes. If teachers use well-prepared Likert scale, evaluation of all groups within a reasonablely short period of time will be possible. The most effective and successful programme in therms of students' participation and enjoyment, was the 'ah-nah-bah-dah-market' program, which is kind of game of the flea market. For better organized program of this kind, however, are essential, In this program, students appraise their own attitudes and behavior by responding to a written questionnaire. In addition, students were asked to record any anecdotes relating to self-appraisal of changes on one's own attitudes and behaviours. Even after the lesson, students keep recording those changes on letters to herself. Role-playing and simulation game programme was applied to a case of 'NIMBY', in which students should decide where to located a refuse dumping ground. For this kind of programme to e successful, concepts and words used in the script should be appropriate for students' intellectual levels, and students should by adequately introduced into the objective and the procedures of the lessons. Written questionnaire was used to assess individual students' attitudes after the lesson, but in order to acquire information on the changes of students' attitudes and skills, pre-test may have to be made. Doing inquiry programme, in which advantages in which students actually investigated the environmental influence of the areas where school os located, had advantages in developing students' ability to study the environmental problems and to present the results of their studies. For this programme to be more efficient, areas of investigation should be clearly divided and alloted to each group so that repetition or overlap in areas of study and presentation be avoided, and complementary wok between groups bee enhanced. In this programme, teacher assessed students' knowledge and attitudes on the basis of reports prepared by each group. However, there were found some difficults in assessing students' attitudes and behaviours solely on the grounds of written report. Perhaps, using a scaled checklist assessing students' attitudes while their presentation could help to relieve the difficulties.

  • PDF

기계경비시스템의 기술 변화추세와 개발전망 (Trend and future prospect on the development of technology for electronic security system)

  • 정태황;서승영
    • 시큐리티연구
    • /
    • 제19호
    • /
    • pp.225-244
    • /
    • 2009
  • 기계경비시스템은 대부분 전자 정보 통신 기기로 구성되어 있기 때문에 정보통신환경의 변화는 기계경비시스템의 기술, 운영체계, 운영방법 등에 영향을 미치게 된다. 본 연구는 기계경비시스템의 기술개발 동향 및 실태를 분석하고 기술개발 전망을 제시하는데 있다. 본 연구는 문헌연구와 기계경비시스템을 사용하는 수요자와 공급자와의 면담을 통한 분석과, 기술개발업자와 시스템 설치 기술자를 대상으로 한 설문조사를 통해 분석결과에 대한 검증을 실시하였다. 국제적으로 경쟁력이 있는 DVR 기술은 본래의 기능인 영상녹화 기능을 위주로 Motion Detection 기능과 상황변화 인식 기능, 목표물 추적 기능 등과 같은 다양한 기능을 수행할 수 있는 하이브리드 DVR 기술개발 쪽으로 진행될 것이며, 상황변화를 인식할 수 있는 기술은 현장에 설치된 많은 카메라를 소수의 인원이 효과적으로 감시할 수 있게 하여 기존의 CCTV시스템의 기능을 보다 향상시킬 수 있을 것이다. 그리고 영상전송기능을 수행하는 인터넷 서버기술과 영상인식 소프트웨어가 카메라에 내장된 'Embedded IP카메라' 기술개발은 CCTV시스템의 구성체계를 보다 간소화 시킬 수 있을 것이다. 생체인식 중 지문인식기술과 얼굴인식기술은 국제적인 경쟁력을 가지고 기술개발이 진행되지만 얼굴인식기술은 인식기술에 있어서는 선진국과 비슷한 수준인 것으로 평가되고 있으나 인식거리를 확보하는 기술과 감시 기능, 3D인식 기술부분에 있어 다소 신뢰성이 떨어져 이를 보완하기 위한 지속적인 개발이 이루어질 것이다. RFID의 무선인식과 추적기능은 사람 또는 차량의 출입통제나 물품의 반입 반출의 감시 통제 등을 위해 유용하게 적용될 것으로 평가되고 있어 RFID의 하드웨어와 소프트웨어 기술개발이 활발하게 진행될 것으로 전망되지만 시장여건과 새로운 제품 도입을 꺼리고 수입 의존도가 높은 현상을 개선하기 위하여 개발된 제품을 사용할 수 있는 여건 조성 등 기술개발을 촉진하기 위한 적극적인 지원이 필요한 것으로 분석된다. 행동패턴을 인식하여 침입상황을 감지하는 센서기술은 기존의 오작동이 많은 공간감지 센서를 대신하여 경보신호의 신뢰도를 향상시켜 자신있는 현장대응을 가능하게 해줄 수 있는 기술로 적극적으로 개발이 이루어질 것으로 전망된다. 행동패턴인식기술과 영상변화를 탐지하고 분석하는 영상인식기술은 유사한 기술로 서로 연계될 수 있으며, 경보신호전송 기술, 영상추적기술, RFID의 무선인식 및 추적 기술, 그리고 이를 관리하기 위한 미들웨어 기술을 통합하여 이상상황에 보다 효과적으로 대응할 수 있는 통합관제시스템을 구축할 수 있을 것이다.

  • PDF

단추에 관한 연구 -19, 20세기를 중심으로- (The Study on the Buttons (centering around 19th-20th Centuries))

  • 이영란
    • 복식
    • /
    • 제22권
    • /
    • pp.263-276
    • /
    • 1994
  • The achievement of notable social reoforms attained during the period of 19th and 20th centuries needlessly speaking remodelded the social environmental into several different patterns such as :1) high industrialization 2) propensity to consume 3) up graded overall social stands. Accordingly the industrial world of the but-tons too established the mess production syhstem by breaking from convention of hand-craft work of 17th century. The raw materials used in the production line on buttons during the 20th century are almost all-kind of materials one can possibly named including cheap plastic which enabled production lines to produce cheaper but higher productivities of the buttons being produced, The design (incused design) used in the 19-20h centuries are : men landscape, sports features, birds, livestocks, bugs, or geomatric features, tec, 1, The classification o f the buttons by materials Techniques shapes colors marking (Incused design) used in the productionof buttons in the England United States of America Laska Italy france Denmark Japan and India are categolizzed as : natural raw materials and syntetical resines. 1) Of the natural raw materials used are : Matal Enamel Iodine Agate, Coral, Green jade(Jasper) Granite, Wood, Ivory, Horn and bone etc. 2) The sythetical resin used in the button in-dustries are : Artificial jewell glass Acrylic material Styroform Celluloid and Nylon etc. 2. The thecnique quoted in producing buttons are hand craft work inlay work precision casting press mosic dye etching, processing, engraving and embossed carving etc. 3. The major designs used in the buttons in -dustries are : Round shape however elliptical column angular and edge shape often used. 4. The colors used are : The multi-colors were highly used than mono-colored materials such as : Adjoining Color and Contrast Color. The highest consideration to be considered in choosing the colors for the buttons are harmonization and matching factor with the garment or dresses to be wore. 5. The major design(incused design) on the buttons are embodiment and the design were also used in order of abstractive-combination abstractive with has offers much surprising. The button industries during the 19th and 20th centuries were not only the determination factors those can judge the value of self-pride of Nation and which were far beyond the in-dustrial arts in those days but also highly refelected and influenced by cultural sense ideology and self-pride of the Nation of those period. The followings are details of the role of the buttons categolized in the order of functional ornamental and symbolical aspects : 1. The functional role : The functional role of the buttons were simply designed for dress how-ever the buttons beyond from this role of function now a days. 2. The ornamental role : The ornamental role of he button beyond from this role of the button were effectuated by : 1) shape materials colors 2) technique locations size and design (incused design) 3) The ramaterials used for buttons shall not be over looked because it is highly depends on the taste sense and combination of harmony with the garment to be wore. 4) The color of the buttons are made well contrasted with the color of garments just as in the case of other artistical area such as matchs with the color of garment of contrast with brigtness of colors contrasted as complementary color and so and so. 5) The technique being adoped are: precision casting press handcraft inlay work etching mosic etc,. Since the buttons are no longer a simple catching devise used to fasten together the different part of the dress but now it has formed own and occupied the independent role in the garment or dresses location can be de-termined and varying depending on the ideas of designers. The size of the buttons has no specific limits, However the variation has widely dependined on the entire circumperence rhythm contrast harmonization of the garments. 3. The symbolical role : Since the button is no longer a just a simple devise for catching and fastening device used fastening together the different part of the garments but now were built a independent area as major part of the Garment and well reflected all kinds of occupations political background cultural as-pect etc. on the buttons. The design of buttons in the western circles are more simplified but they are polished looks and their techniques of manufacturing are comination of both machanis and handcraft. The colors used in the buttons are pretty well harmonized with garment(dress). Almost all kind of materials can be used in the but-tons however materials used in the buttons are : Bone of livestocks ivory, turtle shell are no longer used because the prevention of cruely of animal. On the contraly the level of buttons indus-try of Korea is far to reach and catch up with the level of western circles. It is highly suggested therefore the but-tons industrial field of Republic of Korea shall place and encouragement in producing beter industrial environment of the buttons based on the traditional and cultural aspect of republic of Korea to produce both manufacturing of qulified and best designed and colored buttons.

  • PDF

충남지역 토마토 재배온실의 구조와 환경조절설비 실태분석 (Actual State of Structures and Environmental Control Facilities for Tomato Greenhouses in Chungnam Region)

  • 남상운;김영식
    • 농업과학연구
    • /
    • 제36권1호
    • /
    • pp.73-85
    • /
    • 2009
  • 충남지역 토마토 재배온실의 구조적 안정성 확보와 체계적 환경관리를 위한 기초자료를 제공할 목적으로 구조 및 환경조절설비 실태를 조사 분석하였으며 그 결과를 요약하면 다음과 같다. 조사대상 충남지역의 토마토 재배온실은 호당 평균면적 0.45ha, 플라스틱 단동온실의 형태가 대부분이며 10년 이상 시설을 사용하고 있는 농가가 많고, 설치방향은 단 연동 구분 없이 대부분 남북동으로 설치되어 있으며 토양재배가 수경재배에 비해 훨씬 많다. 온실의 폭은 7~8m(평균 7.6m), 길이는 80~100m(평균 89.7m)인 농가가 대부분이었으며, 단동온실의 평균 높이는 측고 1.6m, 동고 3.2m, 연동온실의 평균높이는 측고 2.9m, 동고 4.8m로 농촌진흥청의 보급형 온실에 비하여는 약간 높게 나타나고 있지만 토마토 재배에 적합한 환경관리를 위해서는 온실의 측고를 좀 더 높여야 할 것으로 사료된다. 단동온실의 서까래 규격은 양호하나 설치간격이 대체로 넓고, 도리의 설치 개수가 부족한 것으로 나타났다. 연동온실의 경우 서까래, 도리, 중방의 규격과 설치간격은 대체로 양호하나 기둥의 설치간격이 대체로 넓은 편이어서 구조적인 안전성 검토가 필요할 것으로 사료된다. 단동 서까래 매설부위 및 연동 기둥의 기초부위는 침하나 인발에 충분히 저항 할 수 있을 것으로 판단된다. 피복재는 대부분 PE필름을 사용하고 에너지 절감을 위해 내부에 고정터널을 설치하는 농가가 많으며 내피도 대부분 PE필름을 사용하고 있다. 단동온실에서는 보온커튼을 사용하는 농가가 많지 않고, 연동에서는 대부분 부직포 또는 알루미늄스크린 등의 다층 보온커튼을 사용하고 있다. 관수장치는 점적호스를 가장 많이 사용하고 다음으로 분수호스를 사용하고 있으며, 관수제어는 수동이 가장 많고 다음으로 타이머를 이용하고 있다. 토양수분 계측에 의한 자동제어는 7.5%에 불과해 관수자동화의 필요성이 높은 것으로 판단된다. 난방은 대부분 온풍 난방기를 이용하고 있으며 적정 난방기 용량을 확보하고 있지 못한 농가도 많아 저온기 생육적온 유지에 어려움이 있을 것으로 판단된다. 난방비는 10a당 평균 6백만 원 정도가 연간 소요되는 것으로 조사되어 난방비 절감 대책이 절실한 것으로 사료된다. 대부분 권취식 천측창을 설치하고 있으나 단동의 경우 천창을 설치한 온실은 17.5%에 불과하며, 환기창 개폐장치는 대부분 자동으로 이루어져 있다. 강제 환기팬이나 공기 유동팬을 설치한 온실은 25.8%에 불과하며 설치대수가 매우 부족하고 정확한 설치기준이 마련되어 있지 못하다. 별도의 구조물에 토마토 유인줄을 설치하지 않고 중방이나 서까래에 설치하는 농가가 많아 구조물에 미치는 작물하중의 영향을 검토할 필요가 있는 것으로 판단된다. 기타 탄산가스 시비, 광환경 제어, 지중가온이나 방충망설치, 하절기 온실 냉방 등 고도의 환경조절을 실시하는 농가는 거의 없는 것으로 나타났다.

  • PDF

공기조화, 냉동 분야의 최근 연구 동향 - 1998년 1999년 학회지 논문에 대한 종합적 고찰 - (Recent Progress in Air Conditioning and Refrigeration Research - A Review of papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 1998 and 1999 -)

  • 이재헌;김광우;김병주;이재효;김우승;조형희;김민수
    • 설비공학논문집
    • /
    • 제12권12호
    • /
    • pp.1098-1125
    • /
    • 2000
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

  • PDF

Piranha 657의 Internal Detector를 이용한 저에너지에서 유리선량계의 선량 특성에 관한 연구 (Experimental Study with Respect to Dose Characteristic of Glass Dosimeter for Low-Energy by Using Internal Detector of Piranha 657)

  • 손진현;민정환;김현수;유광열;임현수;김정민;정회원
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제35권2호
    • /
    • pp.119-124
    • /
    • 2012
  • 최근 유리선량계는 Thermoluminescent Dosimeter (TLD)와 더불어 진단영역부터 치료영역에까지 즉, 저에너지영역에서부터 고에너지 영역에 걸쳐 광범위하게 흡수선량 측정에 이용되고 있다. 그러나, 유리선량계의 재현성과 에너지 의존성 등 선량특성에 관한 연구 보고는 주로 고에너지 영역에서 이루어진 결과 값들이다. 이는 방사선 선량 측정소자나 측정기들의 특성연구를 137Cs 이나 60Co를 이용하기 때문으로 사료되며 이들은 모두 치료영역에서 사용되는 고에너지 방출 방사선 선원들이다. 따라서, 본 연구에서는 Glass Dosimeter (GD)를 이용하여 진단 영역의 저에너지 방사선 특성을 50kV, 80kV, 100kV 관전압 변화를 주어 측정한 Piranha 선량에 대한 유리선량계의 선형성, 재현성, 시간에 따른 재현성을 실험 평가하였다. 실험 기기 및 방법으로는 진단용 발생장치에서 발생되는 방사선선량 측정은 다기능 QA 측정기(RTI Electronic, Sweden)인 Piranha 657의 internal detector로 측정 하였으며 측정조건은 25mA, 0.02sec, 2.5mAs 그리고 SSD가 100cm일 때 조사면 $10{\times}10cm^2$로 하였다. 유리선량계 총 60개를 50kV, 80kV, 100kV 세 그룹으로 나누고 동일한 조건으로 유리선량계에 조사하였다. 본 실험결과에서 유리선량계의 선형성은 기존 보고된 고에너지 고선량 영역과 같이 저에너지, 저선량에서도 선량에 따른 선형성을 나타냈다. 재현성과 시간에 따른 재현성도 양호하였다. 본 실험결과와 같이 유리선량계는 고에너지영역에서의 선량측정 뿐만 아니라 저에너지의 선량측정도 가능한 선량계임을 알 수 있었다.

공기조화, 냉동 분야의 최근 연구 동향 -2002년 및 2003년 학회지 논문에 대한 종합적 고찰 - (Recent Progress in Air Conditioning and Refrigeration Research - A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2002 and 2003 -)

  • 정광섭;김민수;김용찬;박경근;박병윤;조금남
    • 설비공학논문집
    • /
    • 제16권12호
    • /
    • pp.1234-1268
    • /
    • 2004
  • A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2002 and 2003 has been carried out. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment/design. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation in diverse facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat transfer, humidity was also interesting to promote comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing research topics. Well developed CFD technologies were widely applied for analysis and design of various facilities and their systems. (2) Heat transfer characteristics of enhanced finned tube heat exchangers and heat sinks were extensively investigated. Experimental studies on the boiling heat transfer, vortex generators, fluidized bed heat exchangers, and frosting and defrosting characteristics were also conducted. In addition, the numerical simulations on various heat exchangers were performed and reported to show heat transfer characteristics and performance of the heat exchanger. (3) A review of the recent studies shows that the performance analysis of heat pump have been made by various simulations and experiments. Progresses have been made specifically on the multi-type heat pump systems and other heat pump systems in which exhaust energy is utilized. The performance characteristics of heat pipe have been studied numerically and experimentally, which proves the validity of the developed simulation programs. The effect of various factors on the heat pipe performance has also been examined. Studies of the ice storage system have been focused on the operational characteristics of the system and on the basics of thermal storage materials. Researches into the phase change have been carried out steadily. Several papers deal with the cycle analysis of a few thermodynamic systems which are very useful in the field of air-conditioning and refrigeration. (4) Recent studies on refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement when new alternative refrigerants are applied. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and new alternative refrigerants including natural refrigerants. Efficiency of various compressors and performance of new expansion devices are also dealt with for better design of refrigeration/air conditioning system. In addition to the studies related with thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out. It should be noted that the researches on two-phase flow are constantly carried out. (5) A review of the recent studies on absorption refrigeration system indicates that heat and mass transfer enhancement is the key factor in improving the system performance. Various experiments have been carried out and diverse simulation models have been presented. Study on the small scale absorption refrigeration system draws a new attention. Cooling tower was also the research object in the respect of enhancement its efficiency, and performance analysis and optimization was carried out. (6) Based on a review of recent studies on indoor thermal environment and building service systems, it is noticed that research issues have mainly focused on several innovative systems such as personal environmental modules, air-barrier type perimeterless system with UFAC, radiant floor cooling system, etc. New approaches are highlighted for improving indoor environmental conditions and minimizing energy consumption, various activities of building energy management and cost-benefit analysis for economic evaluation.

모바일 기반 온실 냉난방 부하 산정 프로그램 개발 (Development of Greenhouse Cooling and Heating Load Calculation Program Based on Mobile)

  • 문종필;방지웅;황정수;장재경;윤성욱
    • 생물환경조절학회지
    • /
    • 제30권4호
    • /
    • pp.419-428
    • /
    • 2021
  • 모바일 기반 온실에너지 계산프로그램을 제작하기 위해 먼저 주요 단일 피복재 10종 및 보온재 16종에 대한 열관류율 측정하였다. 또한 피복 및 보온재를 이중 및 삼중으로 다층 설치할 때 열관류율 추정을 위하여 이중 설치시 24조합, 삼중설치 시 59조합에 대한 열관류율을 핫박스를 이용하여 측정하였다. 단일 피복재에서는 PE필름(0.08mm) 대비 PO필름(0.15mm)이 가장 열관류율이 가장 작고 열절감율이 가장 큰 것으로 나타났다. 단일 보온재에서는 열관류율에서는 외피가 있는 5겹의 다겹보온커튼이 가장 보온력이 좋은 것으로 나타났다. 또한 단일자재에 대한 열관류율 값과 열저항값을 이용한 피복 및 보온재의 다층설치시의 총 열관류율 값을 산정하였고 실측 값과의 오차를 보정하는 선형회귀식을 도출하였다. 단일재료의 열관류율값에 의한 피복 및 보온재의 다층설치시 열관류율 추정 모형을 개발한 결과 모형평가지수가 0.90(0.5 이상일 때 양호)으로 나타나 추정치가 실측치를 매우 잘 재현 하고 있는 것으로 나타났다. 또한 시험온실을 통한 실증시험결과 예측된 열절감율이 실측치보다 상대오차 2%로 작게 나타나는 것으로 평가되었다. 이러한 연구결과를 기반으로 모바일 기반의 온실 에너지계산 프로그램을 개발하였다. 이 프로그램은 HTML5 표준 웹 기반 모바일 웹 애플리케이션으로 구현하였으며 N-Screen 지원을 통해 다양한 모바일 장치 및 PC 브라우저에서 동작이 가능하게 제작되었다. 또한 온실 피복(12종) 및 보온재(16종)의 조합별 열관류율 및 난방부하계수를 제공하여 농민이 모바일로 온실 위치, 형태 및 피복·보온재 등을 반영한 최대 주야간 냉난방부하 및 기간 난방부하를 산정할 수 있다. 대상 온실의 에너지 소비량에 대한 평가가 가능하며 온실의 지역 및 형태에 따라 피복 및 보온재의 최적 선택으로 에너지 절감형 온실 설계가 가능할 것으로 판단되었다.

기능성 소화불량 한의 변증 표준화를 위한 이중탕, 평위산 및 시호소간탕 투여 : 무작위 배정, 평가자 눈가림, 3군 비교, 평행 설계, 공개, 다기관 임상시험 프로토콜 (Administration of Yijung-tang, Pyeongwi-san, and Shihosogan-tang for Standardization of Korean Medicine Pattern Identification for Functional Dyspepsia: A Study Protocol of a Randomized, Assessor-blind, 3-Arm, Parallel, Open-label, Multicenter Clinical Trial)

  • 이보람;조민진;최영은;권오진;임미영;고석재;김소연;김용주;남동현;최동준;이준환;박재우;김호준
    • 대한한방내과학회지
    • /
    • 제43권6호
    • /
    • pp.1105-1121
    • /
    • 2022
  • Objectives: The purpose of this study is to explore the effectiveness and safety of frequently used clinical herbal medicines (Yijung-tang [Lizhong-tang, LJT], Pyeongwi-san [Pingwei-san, PWS], and Shihosogan-tang [Chaihu Shugan-tang, SST]) in patients with functional dyspepsia (FD) when administered according to herbal medicine and Korean medicine pattern identification. The results of this study will be used to standardize the diagnostic instrument used in Korean medicine and to investigate biomarkers of Korean medicine pattern identification. Methods: This study will be a randomized, assessor-blind, 3-arm, parallel, open-label, multi-center clinical trial. A total of 300 FD participants will be recruited from 3 Korean medical hospitals and assigned to the LJT (n=100), PWS (n=100), and SST (n=100) groups according to FD pattern identification. The patients will take the medication for 8 weeks, 3 times a day, before or between meals. The primary outcome will be total dyspepsia symptom (TDS) and the secondary outcomes will be adequate relief (AR) for dyspepsia, overall treatment effect (OTE), visual analogue scale (VAS), functional dyspepsia-related quality of life (FD-QoL), gastrointestinal symptom score (GIS), and pattern identification questionnaires. For the exploratory outcomes, we will analyze blood and fecal metabolome profiles, microbiota from fecal and saliva samples, single nucleotide polymorphism (SNP), and results of Korean medicine diagnosis device measurements (heart rate variability, and tongue, pulse, and abdominal diagnosis). Conclusions: The results of this study will prove objectivity for Korean medicine pattern identifications, and the effectiveness and safety of herbal medicines for the population with FD.