• 한국통신학회논문지
• /
• 제28권6A호
• /
• pp.379-385
• /
• 2003

본 논문에서는 다수의 사용자가 있는 주파수 선택성 페이딩 환경하의 multi-rate CDMA 시스템에서Hopfield 신경망의 시정수를 제어하는 알고리즘을 이용하여 Hopfeld 신경망 기반 다중 사용자 검출기의 국부 최소점 문제를 간단히 해결하고 설계된 검출기의 성능을 병렬 간섭 제거기와 비교 분석하였다 또한 역방향 링크는 부호 길이가 256 칩인 short 스크램블링 부호를 가정하고, short 스크램블링 부호의 주기성을 이용한 간단한 상관계수 예측 알고리즘을 사용하여 주기적인 확산부호간 상관계수 행렬을 계산하고 Hopfield 신경망의 입력으로 사용하여 확산 코드의 주기에 상응하는 연산에 필요한 신경망회로의 복잡도를 1/(64*64) 배로 단순화하였다. 그, 결과 Hopfield 신경망을 이용한 다중 사용자 검출기(HNN-MUD)는 다중 사용자 간섭(MAI)을 효과적으로 제거하여 기존의 검출기에 비해 낮은 비트 오류율을 보였고 근원거리상황(near-far situation)에서도 타 사용자의 전력의 크기에 관계없이 거의 일정한 비트 오류율을 보여, 기존의 검출기 보다 성능이 향상됨을 보였다.

• ETRI Journal
• /
• 제30권6호
• /
• pp.807-817
• /
• 2008

We present a low-density parity-check (LDPC)-based, threaded layered space-time-frequency system with emphasis on the iterative receiver design. First, the unbiased minimum mean-squared-error iterative-tree-search (U-MMSE-ITS) detector, which is known to be one of the most efficient multi-input multi-output (MIMO) detectors available, is improved by augmentation of the partial-length paths and by the addition of one-bit complement sequences. Compared with the U-MMSE-ITS detector, the improved detector provides better detection performance with lower complexity. Furthermore, the improved detector is robust to arbitrary MIMO channels and to any antenna configurations. Second, based on the structure of the iterative receiver, we present a low-complexity belief-propagation (BP) decoding algorithm for LDPC-codes. This BP decoder not only has low computing complexity but also converges very fast (5 iterations is sufficient). With the efficient receiver employing the improved detector and the low-complexity BP decoder, the proposed system is a promising solution to high-data-rate transmission over selective-fading channels.

• Korean Journal of Radiology
• /
• 제23권9호
• /
• pp.854-865
• /
• 2022

Photon-counting detector (PCD) CT is a new CT technology utilizing a direct conversion X-ray detector, where incident X-ray photon energies are directly recorded as electronical signals. The design of the photon-counting detector itself facilitates improvements in spatial resolution (via smaller detector pixel design) and iodine signal (via count weighting) while still permitting multi-energy imaging. PCD-CT can eliminate electronic noise and reduce artifacts due to the use of energy thresholds. Improved dose efficiency is important for low dose CT and pediatric imaging. The ultra-high spatial resolution of PCD-CT design permits lower dose scanning for all body regions and is particularly helpful in identifying important imaging findings in thoracic and musculoskeletal CT. Improved iodine signal may be helpful for low contrast tasks in abdominal imaging. Virtual monoenergetic images and material classification will assist with numerous diagnostic tasks in abdominal, musculoskeletal, and cardiovascular imaging. Dual-source PCD-CT permits multi-energy CT images of the heart and coronary arteries at high temporal resolution. In this special review article, we review the clinical benefits of this technology across a wide variety of radiological subspecialties.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.215-218
• /
• 1998

This paper proposes a blind multi-user detector using Code-Constrained Minimum Variance (CCMV) method which directly detects the DS-CDMA signals in a multipath fading channel without estimating the channels. This algorithm reduces the complexity of computation by making a small size data matrix with the order of the channel length. Advantageously it requires to know the spreading code and the time delay of only the desired user.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.79.3-79
• /
• 2002

$\textbullet$ Introduction $\textbullet$ Structure of variable multi-valued spatial filter detector(VMSFD) $\textbullet$ Moment analysis by VMSFD $\textbullet$ Experimental results $\textbullet$ Fabricated chip with photodiode array $\textbullet$ Conclusion

• 한국통신학회논문지
• /
• 제25권10A호
• /
• pp.1540-1547
• /
• 2000

In this paper, the performance of the MMSE multiuser detector is compared with the conventional detector with respect to the signal-to-noise ratio, the number of users and the Nakagami parameter under AWGN as well as Nakagami fading channel. The results show that the MMSE multiuser detector is superior to the conventional detector with respect to cancelling the multiple access interference. However, its drawback is the hardware's complexity. To solve this drawback, the advanced MMSE multiuser detector is presented, and its performance is analyzed. The number of taps in the advanced MMSE multiuser are independent of the processing gain. Thus, the system engineer can choose the appropriate number of taps in the detector to achieve a optimal trade-off between the hardware complexity and the performance of system.

• 대한안전경영과학회지
• /
• 제23권3호
• /
• pp.97-102
• /
• 2021

This study developed a scenario to understand the reaction rate and operational time according to RTI value of rate of rise detector in each type in case of fire mattress. In the results of analyzing the reaction rate and operational time of detector in each scenario, in case when installing a single detector, the elevated temperature per minute was raised to 8℃/min ~ 9℃/min. In case when installing two detectors, it was raised to 9℃/min ~ 10℃/min. In case when installing three detectors, it was raised to 10℃/min. The horizontal distance between detector and mattress was 1.8m~2.5m. Whenever the number of detectors was increased, the horizontal distance was decreased. The operational time of detector was within maximum 540 seconds and minimum 420 seconds. As the research tasks in the future, there should be the researches on the effects of reaction rate of detector on the evacuation in case of fire through the result value of RSET by setting up the latency until the detector operates, and the researches on the safety by understanding if the operational time of detector is suitable for the evaluation standard of performance-centered design.

• Imaging Science in Dentistry
• /
• 제39권1호
• /
• pp.27-33
• /
• 2009

Purpose: The purpose of this study was to evaluate the clinical usefulness of the recently developed multi-detector computed tomography and cone beam computed tomography in pre-operative implant evaluation, by comparing them with the single detector computed tomography, already confirmed for accuracy in this area. Materials and Methods: Five partially edentulous dry human mandibles, with $1{\times}1mm$ gutta percha cones, placed in 5mm intervals posterior to the mental foramen on each side of the buccal part of the mandible, were used in this study. They were scanned as follows: 1) Single detector computed tomography: slice thickness 1mm, 200mA, 120kV 2) Multi-detector computed tomography: slice thickness 0.75mm, 250mA, 120kV 3) Cone beam computed tomography: 15mAs, 120kV Axial images acquired from three computed tomographies were transferred to personal computer, and then reformatted cross-sectional images were generated using V-Implant $2.0^{(R)}$ (CyberMed Inc., Seoul, Korea) software. Among the cross-sectional images of the gutta perch a cone, placed in the buccal body of the mandible, the most precise cross section was selected as the measuring point and the distance from the most superior border of the mandibular canal to the alveolar crest was measured and analyzed 10 times by a dentist. Results: There were no significant intraobserver differences in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). There were no significant differences among single detector computed tomography, multi-detector computed tomography and cone beam computed tomography in the distance from the most superior border of the mandibular canal to the alveolar crest (p>0.05). Conclusion: Multi-detector computed tomography and cone beam computed tomography are clinically useful in the evaluation of pre-operative site for mandibular dental implants, with consideration for radiation exposure dose and scanning time.

• 분석과학
• /
• 제17권5호
• /
• pp.434-437
• /
• 2004

Alpha track technology can provide useful isotopic information of boron in the primary coolant water. In the quantitative analysis using the alpha track analysis, the shape or area of sample on the solid track detector becomes very important, especially for the analysis of liquid samples. In this research, a multi-dot plate has been developed for this purpose. The multi-dot plate provides fixed standard shape of the sample solution that stays inside of the printed circle, and consequently increases the reproducibility of the boron analysis.

• 한국화재소방학회논문지
• /
• 제19권1호
• /
• pp.99-103
• /
• 2005

본 연구는 단신호 On/Off 회로방식의 단신호감지기와 다신호 화재감지기가 서로 호환성을 갖도록 하는 화재감지기베이스에 관한 연구이다. 다기능화된 베이스회로의 기능은 기존 화재경보설비와 도난방지설비에 화재신호를 동시에 전송하는 기능을 가지고 있으며 신뢰성도 확인되었다. 또한 HA, OA설비와도 접속호환성이 있으며 기존 화재감지기의 부착이 확실하고 취급, 점검이 용이하도록 하였다. 연구결과, 다기능형 화재감지기 베이스회로의 기능은 소방관련 기준에서 정하는 요구조건에 적합한 결과를 가지고 있으며 하나의 화재감지기에서 2개의 화재신호를 출력할 수 있는 성능이 검증되었다. 또한, 화재신호를 입력신호로 하는 도난방지설비 등 다른 설비와 연동하여 화재 시 조기경보시스템을 구축하여 인명피해 및 재산피해의 최소화에 기여할 수 있다.