• 한국군사과학기술학회지
• /
• 제9권1호
• /
• pp.80-88
• /
• 2006

The purpose of this thesis is to research and propose a practical Information Security Technical Architecture on Primary Defense Information Infrastructure with regard to requirement of information security. The scope of this research is limited to national defense information master plan & security rule, and U.S. DoD's IATF is used to plan a detailed structure. The result of this research can be used as a guide book for providing security for Army IT infrastructure now and in the future as well as to devise a plan for research and development in information protection technology.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.425-431
• /
• 2012

Utilizing the three-dimensional Snyder-Mitchell model with a PT-symmetric potential, we study the influence of PT symmetry on beam propagation in strongly nonlocal nonlinear media. The complex Coulomb potential is used as the PT-symmetric potential. A localized spatiotemporal accessible soliton solution of the model is obtained. Specific values of the modulation depth for different soliton parameters are discussed. Our results reveal that in these media the localized solitons can exist in various shapes, such as single-layer and multi-layer disk-shaped structures, as well as vortex-ring and necklace patterns.

• Computers and Concrete
• /
• 제29권 5호
• /
• pp.285-301
• /
• 2022

This study aims at developing a torsional strength model based on a nonlinear analysis method presented in the previous studies. To this end, flexural neutral axis depth of a reinforced concrete section and effective thickness of an idealized thin-walled tube were formulated based on reasonable approximations. In addition, various sectional force components, such as shear, flexure, axial compression, and torsional moment, were considered in estimating torsional strength by addressing a simple and linear strain profile. Existing test results were collected from literature for verifications by comparing with those estimated from the proposed model. On this basis, it can be confirmed that the proposed model can evaluate the torsional strength of RC members subjected to combined loads with a good level of accuracy, and it also well captured inter-related mechanisms between shear, bending moment, axial compression, and torsion.

• 비파괴검사학회지
• /
• 제20권4호
• /
• pp.285-289
• /
• 2000

본 연구는 콘크리트내의 철근의 굵기와 깊이를 동시에 측정할 수 있는 기술 개발에 관한 것이다. 개발된 탐촉자는 기존의 철근 탐지기와 다른 구조를 지니는데 감지 코일이 세 개로 구성되어 있다. 따라서 세 가지 신호를 동시에 측정하여 분석함으로써 철근의 굵기와 깊이를 분석하도록 되어 있다. 탐촉자 내 코일의 전압과 위상 변화를 임피던스 분석기를 이용하여 조사하고 그 전달함수의 괘적을 분석하였다. 여기 코일 내부에 장착된 감지 코일은 알려진 바와 같이 단순한 변화 형태를 나타내었으나 여기 코일 밖에 장착된 코일의 경우 변화 곡선이 복잡하였다. 실제 철근탐지 실험은 일반 와전류 탐상기를 이용하였는데 여러 가지 철근의 굵기와 깊이에 대하여 실험하였다. 철근 깊이에 따른 신호 변화는 임피던스 분석기에 의한 전달함수 변화에서 나타낸 것과 비슷한 경향을 나타내었으며 감지 코일마다 다른 전압의 변화를 이용하여 철근의 굵기와 깊이의 동시 측정이 가능하였다.

• Tribology and Lubricants
• /
• 제31권1호
• /
• pp.21-27
• /
• 2015

We carry out experiments to characterize textured bearing steel with varying hole density and depth. Textured surface is believed to reduce the friction coefficient, and improve performance and wearing caused by third-body contact. We employ three lubrication regime conditions based on the Stribeck curve: boundary lubrication, mixed lubrication, and hydrodynamic lubrication. Ultrasonic machining is an untraditional machining method wherein abrasive grit particles are used. The hammering process on the work piece surface by abrasive provides the desired form. In this study, we create multi-holes on the bearing steel surface for texturing purposes. Holes are formed by an ultrasonic machine with a diameter of 0.534 mm and a depth of about 2-4 mm, and they are distributed on the contact surface with a density between 1.37-2.23%. The hole density over the surface area is an important factor affecting the friction. We test nine types of textured specimens using four times replication and compare them with the untextured specimen using graphs, as well as photographs taken using a scanning electron microscope. We use Analyzes variant in this experiment to find the correlation between each pair of treatments. Finally, we report the effect of hole density and depth on the friction coefficient.

• 한국언론정보학보
• /
• 제60권
• /
• pp.172-192
• /
• 2012

지난 십수 년 동안 텔레비전을 시청할 수 있는 플랫폼이 다양해지고 다양한 미디어 형식을 결합시킨 소비가 손쉽게 일어나며 국내 지상파 방송 프로그램 이외의 프로그램 자원이 풍부해지는 포스트 TV 시대가 전개된다. 이 연구는 미디어 환경 변화에 따라 텔레비전 시청 경험의 성격과 의미가 어떻게 달라지고 있는지를 주목해보고자 한다. 특히 월터 옹(Walter Ong)의 관계주의적 시각에서 현재의 텔레비전 시청 환경, 시공간 경험, 사회적 장소로서의 텔레비전, 텔레비전 시청의 의미와 위상 등을 구체적으로 관찰해보고자 한다. 이를 위해 29명의 20대에 대한 심층 인터뷰 조사를 진행하였고, 이러한 인터뷰 사례를 기초로 일상 속에 이용하는 커뮤니케이션 체계가 변화하면서 텔레비전의 의미와 적절성이 어떻게 바뀌고 있는지를 구체적으로 기술하고 이해해보고자 하였다. 이들의 사례는 텔레비전 시청 경로가 다변화되고 소셜 미디어 이용과 연결되면서 텔레비전 시청 개념이 확장되고 있음을 시사한다. 물리적, 상징적 '모이는' 장소로서의 텔레비전의 의미가 여전히 '잔존'하지만, '집단적인 개인화'와 '개인적 집단화' 라는 다양한 층위의 시청 경험이 만들어지고 있음을 보여주고 있다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제43권2호
• /
• pp.105-114
• /
• 2020

This study aimed to assess of beam-matching accuracy for an 8 MV beam between the same model linear accelerators(Linac) commissioned over two years. Two models were got the customer acceptance procedure(CAP) criteria. For commissioning data for beam-matched linacs, the percentage depth doses(PDDs), beam profiles, output factors, multi-leaf collimator(MLC) leaf transmission factors, and the dosimetric leaf gap(DLG) were compared. In addition, the accuracy of beam matching was verified at phantom and patient levels. At phantom level, the point doses specified in TG-53 and TG-119 were compared to evaluate the accuracy of beam modelling. At patient level, the dose volume histogram(DVH) parameters and the delivery accuracy are evaluated on volumetric modulated arc therapy(VMAT) plan for 40 patients that included 20 lung and 20 brain cases. Ionization depth curve and dose profiles obtained in CAP showed a good level for beam matching between both Linacs. The variations in commissioning beam data, such as PDDs, beam profiles, output factors, TF, and DLG were all less than 1%. For the treatment plans of brain tumor and lung cancer, the average and maximum differences in evaluated DVH parameters for the planning target volume(PTV) and the organs at risk(OARs) were within 0.30% and 1.30%. Furthermore, all gamma passing rates for both beam-matched Linacs were higher than 98% for the 2%/2 mm criteria and 99% for the 2%/3 mm criteria. The overall variations in the beam data, as well as tests at phantom and patient levels remains all within the tolerance (1% difference) of clinical acceptability between beam-matched Linacs. Thus, we found an excellent dosimetric agreement to 8 MV beam characteristics for the same model Linacs.

• Environmental Engineering Research
• /
• 제20권1호
• /
• pp.1-18
• /
• 2015

The biosorption process has been established as characteristics of dead biomasses of both cellulosic and microbial origin to bind metal ion pollutants from aqueous suspension. The high effectiveness of this process even at low metal concentration, similarity to ion exchange treatment process, but cheaper and greener alternative to conventional techniques have resulted in a mature biosorption technology. Yet its adoption to large scale industrial wastewaters treatment has still been a distant reality. The purpose of this review is to make in-depth analyses of the various aspects of the biosorption technology, staring from the various biosorbents used till date and the various factors affecting the process. The design of better biosorbents for improving their physico-chemical features as well as enhancing their biosorption characteristics has been discussed. Better economic value of the biosorption technology is related to the repeated reuse of the biosorbent with minimum loss of efficiency. In this context desorption of the metal pollutants as well as regeneration of the biosorbent has been discussed in detail. Various inhibitions including the multi mechanistic role of the biosorption technology has been identified which have played a contributory role to its non-commercialization.

• 전자공학회논문지D
• /
• 제36D권7호
• /
• pp.50-55
• /
• 1999

Separate confinement heterostructure(SCH) 구조를 갖는 InGaAs/InGaAsP 다중양자우물구조의 상호섞임을 이용하여 광도파로를 제작하였다. 광도파로는 $CH_4/H_2$ 혼합가스를 이용한 반응성 이온 식각 방식으로 제작하였으며, 제작된 광도파로는 폭이 $5{\mu}m$이고, 식각 깊이가 $1.2{\mu}m$이다. 광도파로의 전송손실은 tunable laser를 이용한 Fabry-Perot 간섭현상을 이용하여 측정하였다. $800^{\circ}C$, 30s 열처리한 후 제작된 광도파로는 1550,nm TE 모드에서 3.76dB/cm, TM 모드에서 3.95dB/cm의 전송손실을 보였다. 이 전송 손실은 지금까지 ,IFVD를 이용해 제작한 광도파로와 비교해서 매우 작은 값이다. 따라서, 이 방법은 광도파로등의 수동소자와 전자소자의 집적에 응용될 수 있다.

• 한국인구학
• /
• 제12권1호
• /
• pp.19-29
• /
• 1989

It is well known that vital statistics is of great importance as basic data for establishing various range of national policies. Especially, vital statistics is important among demographic information for monitoring and evaluating the population policy, for constructing life table, for making population projection, and for studying various aspects of the society. In principle, the production of vital statistics is based on the registration system. It is, however, still observed that there are some limitations in utilizing fully the registration system due to the inherent problems such as problems in its coverage, accuracies and timeliness. Thus, as an alternative, many countries conduct survey on vital statistics in order to supplement the registration system and obtain in-depth data. Korea is no exception in this aspect. The National Bureau of Statistics carries out the so-called Continuous Demographic Survey. This is a kind of multi-round retrospective survey, covering 32, 000 households and having reference period of one month. The survey has also characteristics of multi-subject sample. Thus, surveys on economic activity status of population, house-hold income & expenditure, and social indicators are together conducted with the same sample. It is, however, found that the survey itself tends to have some quality problems. Especially, the quality problems connected with field data collection are summarized as coverage error, non-response error and response error. Although it is inevitable not to be free from these errors, we should make all our efforts to reduce the errors. The probable schemes pointed out in this paper are as follows : 1) the strengthening formal quality control activities, 2) the review of the survey method, i. e., the combining interview method with mail-sending and mail-back method or pick-up method, 3) well documentation for various cases found in every stage of data collection, and 4) the strengthening the analytical activities. It is, also, emphasized that sincerity of planners and interviewers is the most important factor among other things.