• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.17-20
• /
• 1999

In this Paper, we discuss reducing the number of orthogonal code in Multi-Code CDMA (MC-CDMA) system. MC-CDMA system is highlighted for multi-media communication services, but conventional MC-CDMA(CMC-CDMA) system are needed many more orthogonal codes compared to traditional direct sequence CDMA(DS-CDMA) systems. in this paper, we propose the system which can reduce the number of orthogonal codes using sub-orthogonal code(SOC) technique. We certificate that the performance of the proposed system shows the almost same result under gaussian noise environment as compared to CMC-CDMA system through Monte-Curio computer simulation method.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.2 s.19
• /
• pp.41-44
• /
• 2007

Optical simulation of the rear and front panel geometries were needed to improve the luminance and efficiency in PDP cells. The 3-dimensional optical code can be used to analyze the variation of geometries and changing of optical properties. In order to improve the accuracy of simulated results, a new UV source, called a multi-cubes UV source, was designed. To design the source, at first UV distribution was calculated with the plasma fluid code and then the UV distribution was transformed to the multi-cube structures in the optical code. Compared to the results from existing UV source, called a planar UV source, could be improved the accuracy of visible light distribution. Simulated results were also compared to the visible distribution measured with the ICCD in a real PDP cell.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.54-57
• /
• 2010

The navigation system like GPS which is core technology is based on Code Division Multiple Access(CDMA) techniques. To receive satellite signal smoothly in CDMA, received signals have to synchronize with spread code. In this paper, we focus on the code tracking methods among synchronization techniques. The conventional delay lock loop(DLL) is unsuitable for multi-path channel. We will introduce how it overcomes distortion by multi-path. We will propose method that separates out multi-path signals and tracks the each path signals. And we will confirm performance of proposed method using Spirent simulator.

• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.302-309
• /
• 2020

An image encryption scheme based on the quick response (QR) code as a data container has aroused wide interest due to the lossless recovery of the decrypted image. In this paper, we apply this method to multi-image encryption. However, since the decrypted image is affected by crosstalk noise, the number of multi-image encryptions is severely limited. To solve this problem, we analyzed the performance of QR code as a data container, and processed the decrypted QR code using the proposed method, so that the number of multi-image encryptions is effectively increased. Finally, we implemented a large image (256 × 256) encryption and decryption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1494-1500
• /
• 1999

In order to provide high speed multimedia data rate service, Multi-Code CDMA has been proposed which converts high speed serial data stream into N parallel low speed data streams with orthogonal PN codes for spreading. However this signal has multi level and causes interferences to be increased at the neighboring cell boundary in the reverse link. Therefore in order to solve the above mentioned problem, M/B-MC/CDMA, in which multi level signal is converted to binary level signal using M/B conversion, is proposed and the performance is compared with MC-CDMA.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.4
• /
• pp.13-21
• /
• 1979

In this paper, some fundamental problems in the assignment and standardization of codes for Korean letters are discussed, and a multi-code method is proposed for the code assignment. This method is designed in particular to reflect the characteristics of Korean letters. Also, based on this method, a computer internal code and a telex code are suggested. The multi-code method enables us to obtain information on the display at a terminal rather easily by assigning the information dispersed among the code sequences to code himself and position. Further this method is shown to be capable of improving the transmission rate by 7.5% over the conventional resolution method if the given code space is efficiently utilized.

• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.462-470
• /
• 2005

We propose a multi-rate and multi-BEP transmission scheme using adaptive overlapping pulse-position modulator (OPPM) and optical power controller in optical code division multiple access (CDMA) networks. The proposed system achieves the multi-rate and multi-BEP transmission by accommodating users with different values of OPPM parameter and transmitted power in the same network. The proposed scheme has advantages that the system is not required to change the code length and number of weight depending on the required bit rate of a user and the difference of bit rates does not have so much effect on the bit error probabilities (BEPs). Moreover, the difference of transmitted powers does not cause the change of bit rate. We analyze the BEPs of the four multimedia service classes corresponding to the com­binations of high/low-rates and low/high-BEPs and show that the proposed scheme can easily achieve distinct differentiation of the service classes with the simple system configuration.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.29-32
• /
• 2000

In this paper, we present an extension of the multi-code CDMA (code division multiple access) systems based on bi-orthogonal modulation by employing a convolutional encoder and an interleaver before serial-to-parallel conversion in the modulator. Bandwidth expansion by the convolutional encoder can be compensated for by the bi-orthogonal modulation, and the interleaver in the system scrambles the convolutionally encoded data bits so that, after serial-to-parallel conversion, each code channel conveys those bits far apart in time. The result is that the proposed system with several order of magnitude less implementational complexity, achieves quite close performance of the conventional systems comprised of Walsh modulation and multiple convolutional encoders and interleavers in all the code channels.

• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.831-846
• /
• 2012

KAERI has developed a two-phase CFD code, CUPID, for a refined calculation of transient two-phase flows related to nuclear reactor thermal hydraulics, and its numerical models have been verified in previous studies. In this paper, the CUPID code is validated against experiments on the downcomer boiling and moderator flow in a Calandria vessel. Physical models relevant to the validation are discussed. Thereafter, multi-scale thermal hydraulic analyses using the CUPID code are introduced. At first, a component-scale calculation for the passive condensate cooling tank (PCCT) of the PASCAL experiment is linked to the CFD-scale calculation for local boiling heat transfer outside the heat exchanger tube. Next, the Rossendorf coolant mixing (ROCOM) test is analyzed by using the CUPID code, which is implicitly coupled with a system-scale code, MARS.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.2
• /
• pp.149-156
• /
• 2011

This paper reveals a distance estimation algorithm based on multi-code ultrasonic and wireless sensor network. For measuring the distances among the sensor nodes, each ultrasonic transmitter transmits multi-code ultrasonic signal simultaneously. Receivers use cross correlation method to separate the coded signals. The information of measured distances is broadcasted to each sensor node by wireless sensor network. The wireless sensor network measures the distance among the sensor nodes using the received signal strength of the broadcasting. The multi-code ultrasonic have a limitation of measurable distance. And the received signal strength is affected from an environment. This paper measures a distance using ultrasonic and a received signal strength in short range. These measured data are applied to the least square estimation algorithm. By the expansion of the fitting curve, a distance measurement in long range using the received signal strength is compensated. The coupled system reduce the error to an acceptable level.