• 대한전기학회논문지
• /
• 제35권6호
• /
• pp.209-216
• /
• 1986

This paper describes the design of multi channel data acquisiton system for industrial process automation. The prototype hardware assembly consists of Z-80A microprocessor, 10-bit A/D converter with 16-channel analog multiplexor and related interface circuitry. The first order lag filter, which can be implemented without any particular computational problem has implemented in software, and the simulation results are shown. The protype system can communicate with a central processor through RS-232C, and can be used either as an intelligent stand-alone controller or as a satellite controller which can be monitored and controlled by a central processor. The singal conditioners for various temperature and humidity sensors are designed and experimental results are shown.

• 한국통신학회논문지
• /
• 제21권8호
• /
• pp.2033-2042
• /
• 1996

In this papre, we describe a recently implemented echo canceller for digital cellular communication of Code Division Multiple Access(CDMA) that features time sharing of digital signal processor(DSP) over four channels in one DSP to reduce per channel costs. In the Public Land Mobile Network(PLMN), it is important to cancel the echo reflected from the Public Switched Telephone Network(PSTN) side. In case of digital mobile system, the round-trip delay of the echo is in excess of about 180 milliseconds due to frame-by-frame voice coding. It is necessary to cancel the echo in PLMN. We have developed a multi-channel echo canceller tht operates with Time Switch Module in a Mobile Switching Center(MSC). The general echo canceller needs PCM trunk interface circuits and the tone detection and disabling circuits, but the multi-channel echo canceller linked with Time Switch Module does not need them. Therefore we could develop the effective and economical echo canceller.

• The Journal of the Acoustical Society of Korea
• /
• 제17권4E호
• /
• pp.17-21
• /
• 1998

This paper presents an implementation of a multi-channel speech surveillance system over telephone lines using TMS320C31 DSP chips. The incoming speech into each telephone line are first compressed simultaneously in real-time by the popular vector-sum excited linear predictive (VSELP) speech coding algorithm at the rate of 8 Kbps. The compressed steech bit streams are then multiplexed with those of other users. The multiplexed speech bit streams are transferred to the system storage equipments with some other required information so that a system operator can later monitor the stored speech data whenever it is necessary. The host program runs under Microsoft Windows95 for an efficient man-machine interface and a future upgrade-ability. We have confirmed that the overall 64-channel system operates satisfactorily in realtime. We also have checked approximately up to 2,880 total hours of recording capability of the system on a playback module and two removable backup drives.

• 한국항행학회논문지
• /
• 제6권4호
• /
• pp.306-311
• /
• 2002

본 논문에서는 adaptive array 안테나와 동일 채널 간섭 제거기를 직렬로 연결한 다중 접속 제거 기법을 채용한 MC CDMA 시스템을 제안하였다. 그리고 제안된 시스템의 성능 열화의 주요 원인인 MUI가 존재하는 AWGN 채널 환경에서 BER (Bit Error Rate) 성능을 분석하였고, 성능 개선 정도를 평가하였다. 성능 해석 결과, adaptive array 안테나보다 동일 채널 간섭 제거기가 성능 개선에 지배적인 영향을 끼침을 알 수 있었고, 다중 접속 제거 기법을 채용하면 사용자 수가 많을수록 성능 개선 효과가 뚜렷이 나타남을 알 수 있었다. 그리고 다중 접속 제거 기법을 채용한 경우, $E_b/N_o$가 10 dB를 넘게 되면 BER=$10^{-5}$을 만족할 수 있음을 알 수 있었다.

• 전기학회논문지P
• /
• 제62권4호
• /
• pp.164-168
• /
• 2013

Recently, in the elevator of the buildings, such as apartment and office building, the visitor monitoring cameras for surveillance, advertising LCD to provide a variety of information, emergency call devices, and safe driving information sensors are installed. A variety of multimedia data from these devices to the central control office, management office, or to guard room are transmitted in real-time. Each sub-systems in the elevator are installed with a separate lines and operated independently and use different management principals, so integrated management for each sub-systems are very difficult. In this study, we develop a new IP-based multi-channel video surveillance system which is integrated surveillance camera, emergency call devices, communications devices, various sensors in the elevator, DVR, ODM, and can manage all devices by two-way communication and integrated interface. And we evaluated the performance of the developed system.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.601-603
• /
• 2004

Multi-Spectral Camera(MSC) is a payload on the KOMPSAT -2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a ground sample distance (GSD) of 1 m over the entire field of view (FOV) at altitude 685 Km. The instrument is designed to have an on-orbit operation duty cycle of $20\%$ over the mission lifetime of 3 years with the functions of programmable gain! offset and onboard image data compression/storage. MSC instrument has one(1) channel for panchromatic Imaging and four(4) channel for multi-spectral Imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). In this paper, the configuration, the interface of MSC hardware and the MSC operation concept are described. And the method of the MSC calibration are described and the design of MSC calibration operation to measure the change of MSC after Launch & Early Operation(LEOP) and normal mission operations are discussed and analyzed.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.825-827
• /
• 2003

Multi-Spectral Camera(MSC) is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a ground sample distance (GSD) of 1 m over the entire field of view (FOV) at altitude 685 Km. The instrument is designed to have an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/ offset and on-board image data compression/storage. The MSC instrument has one(1) channel for panchromatic imaging and four(4) channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI CCD Focal Plane Array (FPA). In this paper, the architecture and function of MSC hardware including electrical interface and the operation concept which have been established based on the mission requirements are described. And the design and the preparation of MSC system operation are analyzed and discussed.

• 정보처리학회논문지A
• /
• 제9A권4호
• /
• pp.451-458
• /
• 2002

본 논문에서는 내장형 리눅스를 이용한 RAID 시스템의 하드웨어 구현 방법을 제시하고 성능을 측정하여 본 시스템의 장단점을 제시한다. 파이버 채널 디스크와 호스트와의정합을 위하여 세 개리 파이버 채널 제어기를 포함하는 하드웨어를 설계 제작하였으며, 이하드웨어 위에 내장형 리눅스를 이식하고 RAID 소프트웨어를 구현하였다. RAID 기능을 위하여 SCSI 목표 모드 디바이스 드라이버와 목표 모드 SCSI 모듈을 구현하여 호스트 컴퓨터에게 SCSI 블록 디바이스를 제공한다. 또한 RAID의 기능을 위하여 리눅스의 Multi-device 모듈을 사용하였고, 높은 성능을 제공하기 위하여 Multi-device 모듈과 목표 모드 SCSI 모듈의 사이에서 연동하는 데이터 캐쉬 모듈을 구현하였다. 리눅스의 RAID 5 모듈을 수정하여, 읽기 성능을 대폭 향상시켰다. 벤치마크는 새로운 RAID 5모듈이 기존의방법보다 전체적인 성능에서 우수함을 보여준다.

• 한국전자통신학회논문지
• /
• 제8권1호
• /
• pp.199-206
• /
• 2013

최근 차량 내 인포테인먼트 시스템에 대한 다양한 요구가 급격하게 증가함에 따라 보다 편리하고 인간 친화적이고 첨단 기능들을 갖춘 차량용 인포테인먼트 시스템들이 속속 등장하고 있다. 본 논문에서는 차량 내 다양한 멀티미디어 응용에 적용할 수 있는 임베디드 기반 차량용 멀티미디어 인포테인먼트 시스템을 구현하였다. 구현된 시스템은 하나의 프로세서에서 두 개 채널 이상의 멀티미디어 소스들을 각각 독립적으로 디스플레이 할 수 있도록 하여 비용을 절감할 수 있다. 또한 저장장치에 저장된 비디오, 오디오, 영상 등의 콘텐츠뿐만아니라 CAM, T-DMB, DVB-T 등 실시간으로 제공되는 콘텐츠들도 멀티로 디스플레이 될 수 있다. Wi-Fi를 이용한 스마트폰과의 연결성을 지원하여 스마트폰에 저장되어 있는 멀티미디어 콘텐츠 또한 멀티로 디스플레이 할 수 있다. 본 논문에서 구현된 시스템은 AVN(Audio Video Navigation), RSE(Rear Seat Entertainment) 등의 차량용 인포테인먼트 시스템에 저비용으로 다양하게 응용될 수 있을 것으로 기대된다.

• 제어로봇시스템학회논문지
• /
• 제19권8호
• /
• pp.725-730
• /
• 2013

This paper proposed a novel method for an analysis feature of an Electroencephalogram (EEG) at all channels simultaneously. In a BCI (Brain-Computer Interface) system, EEGs are used to control a machine or computer. The EEG signals were weak to noise and had low spatial resolution because they were acquired by a non-invasive method involving, attaching electrodes along with scalp. This made it difficult to analyze the whole channel of EEG signals. And the previous method could not analyze multiple stimuli, the result being that the BCI system could not react to multiple orders. The method proposed in this paper made it possible analyze multiple-stimuli by grouping the channels. We searched the groups making the largest correlation coefficient summation of every member of the group with a BHS (Binary Harmony Search) algorithm. Then we assumed the EEG signal could be written in linear summation of groups using concentration parameters. In order to verify this assumption, we performed a simulation of three subjects, 60 times per person. From the simulation, we could obtain the groups of EEG signals. We also established the types of stimulus from the concentration coefficient. Consequently, we concluded that the signal could be divided into several groups. Furthermore, we could analyze the EEG in a new way with concentration coefficients from the EEG channel grouping.