• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1623-1629
• /
• 2004

The objective of this study is the rapid bulk combustion of mixture in a constant volume chamber with a tiny sub-chamber. Some narrow passage holes were arranged to induce simultaneous multi-point ignition in the main chamber by jet of burned and unburned gases including radicals from the sub-chamber, and the equivalence ratios of pre-mixture in the main chamber and the sub-chamber were the same. The principal factors of the Radical Induced Auto-Ignition (RIAI) method are the diameter of the passage holes and the volume of sub-chamber. The relationship between the sub-chamber and diameter of passage hole was represented by the ratios of sub-chamber volume to passage hole volume. The ratios are non-dimensional coefficients for sub-chamber characteristics. As a result, the RIAI method reduced the combustion period, which expanded the lean limit in comparison with SI method.

• 한국안전학회지
• /
• 제34권1호
• /
• pp.40-44
• /
• 2019

Experimental studies have been carried out to investigate characteristics of gas explosion using a multi layered water gel barrier in a vented explosion chamber. The chamber is consisted of 1600 mm in length, with a square cross-section of $100{\times}100mm^2$. The gel concentration of inner layer of MLWGB ranged from 10% to 90% with intervals of 10% by weight of gel. Displacement of the MLWGB was photographed with a measured using a high-speed video camera, and pressure development was measured using a data acquisition system. It was found that MLWGBs with 10 ~ 20% inner layer concentrations were ruptured during the explosions. As the concentrations of inner layer increased from 30% to 90%, the barriers were not ruptured. As the gel concentrations of the inner layer increased, the displacement increased toward the chamber exit and the pressure decreased for the ruptured barriers. It was found that the pressure attenuation obtained from the MLWGB was higher than that of the single water gel barrier. For the cases of non-ruptured barriers, the pressure inside the chamber less increased with increasing gel concentrations of the inner layer. It was also found that the displacement moved back into the chamber for non-ruptured MLWGBs, and it was sensitive to the gel concentrations.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.198-203
• /
• 2007

본 연구의 목표는 air core의 길이 조절이 가능한 스월인젝터의 음향학적인 감쇠기능을 통해 고주파 연소불안정을 억제하는 것이다. air core(길이, 형상, 부피)와 인젝터의 위치에 대한 음향학적인 감쇠 효과는 선행 연구를 통해 실험되었다. 이러한 결과들을 바탕으로 다중 인젝터들의 효과에 대한 연구를 진행하였다. 실험 결과로부터 각 모드의 배(anti-node)에 장착된 인젝터들의 수의 증가로 감쇠효과가 증가하는 것을 확인하였다. 또한 각 모드들의 배(anti-node)에 장착되어 동조된 인젝터들이 동시에 개별적인 모드 감쇠 성능을 보일 수 있음을 확인했다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.147-153
• /
• 2014

The centrifugal oil purifier is used in an engine for lubrication and to remove impurities. The momentum needed for the rotation of the cylindrical chamber is obtained by jet injections. An impure particle in the oil is separated by the centrifugal forces moving to the inner wall of the rotating cylindrical chamber body. The dust particles are eliminated when the particles are absorbed onto the surface of the inner wall of the chamber body. The flow characteristics and the physical behaviors of particles in this centrifugal oil purifier were investigated numerically and the filtration efficiencies was evaluated. For calculations, a commercial code is used and the SST (Shear Stress Transport) turbulence model has been adopted. The MFR (Multi Frames of Reference) method is introduced to consider the rotating effect of the flows. Under various variables, such as particle size, particle density and rotating speed, the filtration efficiencies are evaluated. It has been verified that the filtration efficiency is increased with the increments in the particle size, the particle density and the rotating speed of the cylindrical chamber.

• Advances in biomechanics and applications
• /
• 제1권1호
• /
• pp.23-40
• /
• 2014

This paper examines the blood chamber of a left ventricular assist device (LVAD) under static loading conditions and standard operating temperatures. The LVAD's walls are made of a temperature-sensitive polymer (ChronoFlex C 55D) and are covered with a titanium nitride (TiN) nano-coating (deposited by laser ablation) to improve their haemocompatibility. A loss of cohesion may be observed near the coating-substrate boundary. Therefore, a micro-scale stress-strain analysis of the multilayered blood chamber was conducted with FE (finite element) code. The multi-scale model included a macro-model of the LVAD's blood chamber and a micro-model of the TiN coating. The theories of non-linear elasticity and elasto-plasticity were applied. The formulated problems were solved with a finite element method. The micro-scale problem was solved for a representative volume element (RVE). This micro-model accounted for the residual stress, a material model of the TiN coating, the stress results under loading pressures, the thickness of the TiN coating and the wave parameters of the TiN surface. The numerical results (displacements and strains) were experimentally validated using digital image correlation (DIC) during static blood pressure deformations. The maximum strain and stress were determined at static pressure steps in a macro-scale FE simulation. The strain and stress were also computed at the same loading conditions in a micro-scale FE simulation.

• 한국소음진동공학회논문집
• /
• 제21권10호
• /
• pp.967-974
• /
• 2011

The direct and indirect PFBEM(power flow boundary element method) for the treatment of the 3 dimensional multi-domain problems are proposed to predict the acoustic energy density in medium to high frequency ranges. In the proposed method, the equation is derived in a matrix form by considering coupled relationships of the power flow at the interface of given domains. The proposed method can successfully obtain the analytical solutions for the problems of coupled cubes and the small-scale reverberant chamber. Then the experiment is carried out to obtain STL(sound transmission loss) by using small-scale reverberant chamber and the results are compared with analysis results.

• 한국전자파학회지:전자파기술
• /
• 제10권1호
• /
• pp.77-83
• /
• 1999

전파무반사실을 구축하기 위해서는 많은 비용이 요구되므로 하나의 전자파무반사실을 여러가지 용도로 사용되는 것은, 공간적, 경제적으로 매우 효율적이다. 본 논문에서는 현재 SK텔레콤에서 운용중인 안테나 및 EMC/EMI측정을 위한 다용도 전자파무반사실에 대하여 설명하고 그 성능에 대한 측정결과를 제시한다. 이 전자파무반사실은 150 MHz에서 40 GHz까지의 주파수 범위까지 Far Field와 Near field에 대한 안테나 측정이 가능한 안테나 측정시스템과 측정환경을 보유하고 있으며, EMC/EMI 측정을 위한 ANSI C63.4dhk CISPR 16.1의 요구조건을 모두 만족하고 있다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.479-486
• /
• 2010

Using the numerical code for the interior ballistics, the performance of the interior ballistics with the characteristics according to the position of the solid propellant in chamber has been investigated. In existing research, propellants have been evenly distributed in the chamber. In this study, however, several cases of the existence of empty space in the chamber at which the propellants are not evenly distributed are considered. The 7-perforated propellant configuration has been used in this research. The results have shown the change of performance of the interior ballistics according to solid propellant positions in the chamber.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.17-24
• /
• 2010

Using the numerical code for the interior ballistics, the performance of the interior ballistics with the characteristics according to the position of the solid propellant in chamber has been investigated. In existing research, propellants have been evenly distributed in the chamber. In this study, however, several cases of the existence of empty space in the chamber at which the propellants are not evenly distributed are considered. The 7-perforated propellant configuration has been used in this research. The results have shown the change of performance of the interior ballistics according to solid propellant positions in the chamber.

• 한국가시화정보학회지
• /
• 제19권2호
• /
• pp.63-73
• /
• 2021

It is essential to accurately predict the change in water level, velocity, and flow rate for each passage of the grit chamber according to the operating conditions of the pump. In this study, VOF multiphase flow analysis was performed, and the flow characteristics of the grit chamber were predicted. As a result of simulations, the sedimentation phenomenon after the entrance of the grit chamber channel is expected to occur on the side walls. When 6 channels are used, the average speed of the channels is about 52% of the design standard, and when 4 channels are used, the value increases to 74% of the design standard. The average water level in the channels tends to decrease as the flow velocity increases, and the water level in the absorption well with a larger flow rate is maintained lower than that in the absorption well with a smaller flow rate.