• Journal of Communications and Networks
• /
• v.5 no.4
• /
• pp.344-353
• /
• 2003

Ultra-wideband (UWB) technology is gaining increasing interest for its potential application to short-range indoor wireless communications. Utilizing ultra-short pulses, UWB baseband transmissions enable rich multipath diversity, and can be demodulated with low complexity receivers. Compliance with the FCC spectral mask, and interference avoidance to, and from, co-existing narrow-band services, calls for judicious design of UWB pulse shapers. This paper introduces pulse shaper designs for UWB radios, which optimally utilize the bandwidth and power allowed by the FCC spectral mask. The resulting baseband UWB systems can be either single-band, or, multi-band. More important, the novel pulse shapers can support dynamic avoidance of narrow-band interference, as well as efficient implementation of fast frequency hopping, without invoking analog carriers.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.333-336
• /
• 2002

An alternative CMOS implementation of a multi-output four-terminal floating nullor (FTFN) with constant-g$_{m}$ rall-to-rail input stage is proposed. This presented circuit is based on the advantages of a complementary transconductance amplifier and class AB dual translinear cell circuit that comes up with wide bandwidth. The constant-g$_{m}$ characteristic is controlled by the maximum-current selection circuits, maintaining the smooth response over the change of input common mode voltage. The circuit performances are confirmed through HSPICE simulations. A current-mode multifunction filter is used to exhibit the potentiality of this proposed scheme.eme.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.265-270
• /
• 2005

In this paper, four-element MIMO(Multi-Input Multi-Output) antenna operating at 5.2GHz and 5.8GHz is proposed. Each antenna element is fabricated by using inverted-L type and the isolation characteristic among antenna elements is adjusted by the distance between radiation element and ground. The designed array antenna has the impedance bandwidth at 5.15$\sim$5.35 and 5.725$\sim$5.825GHz for VSWR$\leq$3 and the isolation characteristic less than -20dB at same frequency.

• Electronics and Telecommunications Trends
• /
• v.33 no.3
• /
• pp.34-40
• /
• 2018

Current studies based on the DVB-S2x standard for the next-generation multi-beam HTS/BH satellite have been investigated. To enhance the efficiency of the transmission throughput and maximize the utilization of the satellite payload resources and bandwidth, the concepts of two advanced techniques, namely, precoding and BH, are described. Furthermore, state-of-the-art aspects currently under discussion, and future study items in the DVB TM-S standardization group, are summarized in this article.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.419-422
• /
• 2007

This paper, designed UWB elliptical slot antenna and analysis based on the distribution of the electromagnetic fields pattern and resonant mode of designed antenna is presented. Designed antenna is fabricated on FR4 substrate with thickness of 1.524mm and relative dielectric constant 4.4. The measured bandwidth of $3.6GHz{\sim}20GHz$ for VSWR<2. Through the field pattern and resonant mode analysis that the slot antenna operates on a series of the multi-pole radiation based on TE modes matched to system impedance. And the perfect magnetic wall is along the axis of symmetry on the y-z plane. This result gives us an easier method to design the similar antennas, which is the impedance matching to the system impedance after once constructing a proper structure with a series of multi-mode resonances.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.2 no.4
• /
• pp.295-301
• /
• 2002

In this paper, solenoid-type 3-D passives (inductors and transformers) have been designed, fabricated, and characterized by using electroplating techniques, wire bonding techniques, multi-layer thick photoresist, and low temperature processes which are compatible with semiconductor circuitry fabrication. Two different fabrication approaches are performed to develop the solenoid-type 3-D passives and relationship of performance characteristics and geometry is also deeply investigated such as windings, cross-sectional area of core, spacing between windings, and turn ratio. Fully integrated inductor has a quality factor of 31 at 6 GHz, an inductance of 2.7 nH, and a self resonant frequency of 15.8 GHz. Bonded wire inductor has a quality factor of 120, an inductance of 20 nH, and a self resonant frequency of 8 GHz. Integrated transformers with turn ratios of 1:1 and n:l have the minimum insertion loss of about 0.6 dB and the wide bandwidth of a few GHz.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.185-194
• /
• 2010

In this paper, we propose an application layer-based vertical handover management protocol, called multihoming RTP (mhRTP), for real-time applications with seamless mobility across heterogeneous wireless access networks. The proposed multi-homing RTP provides a soft handover by utilizing multiple available wireless access network interfaces simultaneously. The newly available path is dynamically added to the ongoing session by the mhRTP session manager. Also the decision making of QoS-improving or QoS-guaranteed handover is possible based on the estimation of available bandwidth in each candidate network. The performances of the proposed mhRTP have been analyzed through a series of simulations on OPNET network simulator. From the performance analysis, we confirmed that the proposed mhRTP can provide QoS-guaranteed vertical handover with efficient session managements.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.5
• /
• pp.570-576
• /
• 2015

Existing flash storage devices such as universal flash storage and solid state disk support command queuing to improve storage I/O bandwidth. Command queuing allows multiple read/write requests to be pending in a device queue. Because multi-channel and multi-way architecture of flash storage devices can handle multiple requests simultaneously, command queuing is an indispensable technique for utilizing parallel architecture. However, command queuing can be harmful to the latency of fsync system call, which is critical to application responsiveness. We propose a dynamic queue depth adaptation technique, which reduces the queue depth if user application is expected to send fsync calls. Experiments show that the proposed technique reduces the fsync latency by 79% on average compared to the original scheme.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.217-218
• /
• 2008

A new diversity technique is proposed for multi-user single-input single-output (SISO) orthogonal frequency division multiplexing (OFDM) uplink system. Each user transmit a symbol using frequency band of all users that are active in the uplink. In addition, a receiver detect each signal using maximum likelihood (ML) method. Simulation results show that the proposed technique improves a diversity order without an additional bandwidth and a loss of data rate.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2089-2094
• /
• 2010

The importance of broadband wireless communication implemented at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. In this paper, Suitable to a subway wireless video transmission OFDM receiver is designed. OFDM receiver system has 6dB gaion because uses diversity of space diversity and MRC(Maximum Ratio Combining) diversity. The transmitter system use C&ITechnologies's transmitter board. IF frequency of receiver is 480MHz. OFDM modulation parameter is as follow, The bandwidth is 8MHz, The numuber of carrier if 2,000, The modulation methode is QAM16, The guard interval is 1/32.