• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.7
• /
• pp.709-715
• /
• 2010

MCDD performs demultiplexing and demodulation of multi-carrier signals for signal processing schemes such as switching, channel encoding and remodulation in an OBP satellite. During the demultiplexing procedure, several factors such as frequency offset and/or quantization error degrade BER performance. Hence, influences of those factors should be reduced. A influence of the frequency offset can be reduced by inserting guard band between channels, and that of quantization error can be decreased by quantization level control. In case that the data rate of system is not limited, the guard band and the quantization level do not affect each other. In the other case, however, mutual influence between them should be considered. In this paper, we observe the mutual influence when the data rate of the MCDD is limited, and analyze the BER performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.186-194
• /
• 2017

In this paper, we analyze the main performance of satellite's Synthetic Aperture Radar system for high resolution and wide swath. We have used the radiation pattern of reflector antenna with array feed and comparison between the conventional ScanSAR mode and SweepSAR mode has been carried out. The SweepSAR mode is a high-resolution wide-swath mode that transmits beams over a wide range and receives echo signals through sequential beamforming based on SCORE(SCan On REceive). In this paper, we analyzed the operating principle and characteristics of satellite's SweepSAR mode and simulate system performances. In addition, in order to increase the utilization of image, performances analysis for multiple frequency bands(C-band, X-band) has been considered.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.10
• /
• pp.37-42
• /
• 2000

There has been a constant effort to study methods for increasing the bandwidth of antenna by microstrip patch. In this paper, we propose a special type of the external rectangular patch, for design and analysis of an antenna using a local multi-point distribution system (LMDS). We minimized electromagnetic emissions from the fringing effect. As a result, we obtained an increase in antenna efficiency and frequency bandwidth. We were also able to design the wide band antenna easily, because of the difference in parameter between the aimed and the simulated antenna was reduced greatly. In comparison with the rectangular patch antenna, the banded one has a wider bandwidth.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.613-617
• /
• 2002

The ceramic filters were developed using technology similar to that of quartz crystal and electromechanical filter. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emhpasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations. Nakazawa developed a double-mode resonator as two acoustically coupled single resonators. And he developed 10.7MHz crystal filters using multi-energy trapping mode of thickness shear vibration. He succeeded in realizing a two-pole band pass filter response without external inductance by splitting a dot electrode to creat coupled symmetric and antisymmetric vibration modes. Accordingly, the simulation for ceramic filter were important. So that, this paper were investigated the pass frequency of filter on the electrode length and thickness of ceramic.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.418-421
• /
• 2001

The ceramic filters were developed using technology similar to that of quartz crystal and electro- mechanical filter. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emphasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations. Nakazawa developed a double-mode resonator as two acoustically coupled single resonators. And he developed 10.7MHz crystal filters using multi-energy trapping mode of thickness shear vibration. He succeeded in realizing a two-pole band pass filter response without external inductance by splitting a dot electrode to creak coupled symmetric and anti- symmetric vibration modes. Accordingly, the simulation for ceramic (inter were important. So that, this paper were investigated the pass frequency of filter on the electrode length and thickness of ceramic.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.577-580
• /
• 2005

This paper reports the high sensitivity actuator for flexible disk. The air stabilized flexible optical disk has very small axial runout. Therefore, It is proper to develop an actuator which has high sensitivity in tracking direction rather than in focusing direction. In order to maximize driving force in radial direction, we present an efficient design of magnetic circuit with simple multi-polarized magnets and auxiliary magnets. Designed magnetic circuit has big force in tracking direction. And we shift 2$^{nd}$ resonance frequency of moving parts Into high frequency band, not causing increase of mass and discord between force and mass centers to secure high sensitivities and sufficient control bandwidth. Finally, experimental results show that designed actuator has superior sensitivity in tracking direction.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.621-629
• /
• 2001

In this thesis a wireless data transmission system has been proposed and analysed that uses the multi-carrier technique with the adaptive modulation scheme. In general, the OFDM(Orthogonal Frequency Division Multiplexing) system is assigning a same amount of information to all sub-carriers in a wireless data transmission. In the proposed system, the different amount of information is assigned to each sub-carrier depending on the state of channel and the target probability of error of system. With the proposed scheme, the transmission rate can be maximized with the fixed power and the required power to transmit the information can be minimized with the target probability of error of system.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.545-555
• /
• 2020

This paper presented efficient transceiver structure using sub-band processing for underwater communication in terms of covertness and performance improvement. In aspect of covertness, encrypted coded-bits are divided into groups, and center frequency and sub band are determined by coded-bits of each group. Therefore, as center frequencies are changed randomly, it maintain the covertness effectively. In aspect of performance improvement, the performance of underwater communication mainly depends on multi-path propagation characteristics, Doppler-spread, and frame synchronization. Accordingly, in order to overcome these effects, non-coherent energy detector and turbo equalization method are employed in receiver side. Furthermore, optimal frame synchronization was proposed. Through the simulation and lake experiment, performance analysis was conducted. Especially in the lake experiment, as a result of applying optimal frame synchronization method to receiver structure, errors are corrected in most frames.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.116-122
• /
• 2006

A fast scan digital-IF FFT receiver at the radio communication band is presented for spectrum monitoring applications. It is composed of three parts: RF front-end, fast LO board, and signal processing board. It has about 19GHz/s scan rate, multi frequency resolution from 10kHz to 2.5kHz, and high sensitivity of below -99dBm. The design and performance analysis of the digital-IF FFT receiver are presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.263-268
• /
• 2001

This paper analyzes error probability performance adopted the Ray Tracing method efficiently analyzing millimeter wave or optic wave in Inter Vehicle Communication(IVC). Analysis environment analyzed bit error characteristic in 60㎓ band with very powerful to multipath wave, to be large to oxygen absorption and to be good to frequency reuse efficiency. We analyzed bit error characteristic of DS/CDMA system by multi access user in Two-Ray rician channel adopted reflect wave of grand, reflect wave of concrete wall and reflect wave of driving vehicle at side road. Improvement performance is adopted MRC diversity.