• 한국물환경학회지
• /
• 제20권6호
• /
• pp.610-614
• /
• 2004

The objective of this study was to remove organics and color in livestock wastewater using coagulation and Fenton oxidation process. After coagulation process as $1^{st}$ treatment, organics in $1^{st}$ treatment water were removed by using OH radical produced in Fenton oxidation process. Removal efficiencies of $COD_{Mn}$ and color were 87.2% and 95.7% separately. At that time, the ratio of $Fe^{2+}/H_2O_2$ was 0.8~1.0, and range of reaction pH was effective at the pH of 3.5~3.8. The Reaction time of 120min more than 60min or 90min was sufficient in Fenton process. Removal efficiency of organics was higher two- or multi-stage treatment than one-stage treatment.

• Journal of applied mathematics & informatics
• /
• 제33권1_2호
• /
• pp.77-87
• /
• 2015

Parallel lines are often used to increase production rate in many manufacturing systems where the main line splits into several lines in parallel, and after some operations, they merge into a main line again. Queueing networks with finite buffers have been widely used for modeling and analyzing manufacturing systems. This paper provides an approximation technique for multi-server two-stage networks with merge configuration and blocking which will be a building block for analysis of general manufacturing systems with parallel lines and merge configuration. The main idea of the method is to decompose the original system into subsystems that have two service stations with multiple servers, two buffers and external arrivals to the second stage are allowed. The subsystems are modeled by level dependent quasi-birth-and-death (LDQBD) process.

• 전자공학회논문지A
• /
• 제30A권12호
• /
• pp.135-146
• /
• 1993

A ner general multi-layer area router, called DINOSAUR, is presented in this paper. DINOSAUR can route various types of routing areas, such as L-shaped channel, switchbox with/without obstacles, and rectilinear area with/without internal modules/terminals. The DINOSAUR algorithm consists of three major stages: layerless maze routing, layering by coloring, and rip-up and reroute. In layerless maze roution stage, the route of each net is determined by modified maze algorithm without taking the conflicts(short. circuits) into account. In layering by coloring stage, the layer of each net is determinde by a heuristic coloring algorithm. When the conflicts are not removed, rip-up and reroute process is invoded. In rip-up and reroute stage, the conflicts are removed iteratively. Many test cases have been run, and on all the benchmark data known in the literature DINOSAUR has performed either better than or comparable to the other routers.

• 한국기후변화학회지
• /
• 제8권2호
• /
• pp.99-108
• /
• 2017

This study aims to analyze the features of adaptation governance of local governments by applying a multi-level governance framework, and to draw policy implications. We analyzed changes in governance of 17 metropolitan cities/provinces, and 33 municipalities in terms of horizontal and vertical cooperation in the process of developing 'The Climate Change Adaptation Action Plan' and its implementation stage. The result shows that the plan contributed to the higher level of vertical cooperation between the central and the local governments to a certain extent, however, during the implementation stage, the level of the partnership decreased due to the absence of governance mechanism. These trends were statistically significant at the level of municipalities. The role of Korea Adaptation Center for Climate Change (KACCC) was also diminished after establishing the plan. The horizontal partnership level among the relevant departments of the local governments showed no significant change as the level was low even in the planning stage. Though Public-Private Partnership (PPP) has increased a bit, it was statistically significant only in the municipalities. Moreover, there was no governance mechanism for PPP or it did not work properly. Based on the results above, it is recommended that the effectiveness of the plans should be increased and support for climate change partnerships or forums at a local level that promotes adaptive capacity is needed. The role of metropolitan cities and provinces should be strengthened through building a multi-level partnership structure. Governance institutionalizing for monitoring and evaluation is also needed.

• 소성∙가공
• /
• 제13권4호
• /
• pp.307-318
• /
• 2004

Rectangular drawn case with extreme aspect ratio is widely used for electrical parts such as a lithium-ion battery container, semi-conductor case and so on. Additionally, from the recent trend towards miniaturization of the multi-functional mobile device, demands for rectangular case with the narrow width are increased. In this study, numerical and experimental approaches for the multi-stage deep drawing process have been carried out. Based on the research results of the width of 5.95mm model, finite element analysis for storage case of rectangular cup type was verified to the width of 4.95mm. Also, a series of manufacturing experiments for rectangular case is conducted and the deformed configuration of the rectangular drawn case are investigated by comparing with the results of the numerical analysis. And the modification of the initial blank is performed to minimize the trimmed material amount. By the application of the modified blank, the sound shape of the deformed parts is improved.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제3회 금형가공 심포지엄
• /
• pp.71-78
• /
• 2004

Most of member parts have experienced severe springback problems because of their open shape Now it becomes imperative to develop an effective method, which can resolve these problems. However, there remain several obstacles to get accurate estimation of shape error. In analysis, we have to analyze the total process including forming, trimming and flanging. Furthermore, it is another challenge to compare the computed result with the real shape. In this study we developed an analysis program for the springback analysis. We could achive a big enhancement in computation time in springback analysis by using latest equation solving technique and could get a more robust solution conversence by contination method. We have approached this problem in two steps. In the first step, we analyzed forming stage to solve tearing and wrinkling problems. In the second step, we have analyzed full process and have done springback analysis with the same boundary condition as field measuring conditions. We have investigated the accuracy of springback analysis in terms of gap and flush used for insfection of real autobody panels. We found good and effective agreement with the observed results.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.196-201
• /
• 2001

This study reveals the thin sheet metal process with multi-forming die that the name is progressive die, as a pilotless type, also high precision production part is made. They require analysis of many kinds of important factors, i.e. theory and practice of metal press working and its phenomena die structure, machining condition for die making, die material, heat treatment of die components, know-how and so on. In this study, we designed and constructed a multi-forming progressive die as a bending and drawing working of multi-stage and performed through the try out for thin sheet metal. Out of the characteristics of this paper that nothing might be ever seen before such as this type of research method on the all of processes of thin and high precision production part.

• 한국정보전자통신기술학회논문지
• /
• 제9권2호
• /
• pp.213-222
• /
• 2016

본 연구는 정책의제형성이 외부집단에 의해 형성된 정책이라기 보다는 정치의 흐름중에서 정부와 여당의 역할이 크게 기여했다는 점과 국내외의 국민을 대표하는 상징적인 정책이라는 점이다. 특히 이주노동자와 결혼이주여성 정책은 글로벌 시대에 해결해야할 중요한 정책이라는 점과 정부가 추진하는 '결혼이주여성 정책'의 결정과정을 살펴봄으로써 정책에 결정적으로 영향을 미친 요인을 확인하기 위한 좋은 사례이기 때문이다. 이러한 연구목적을 달성하기 위한 구체적인 방안은 다음과 같다. 한국 다문화정책에 대한 이론적 논의를 진행하고, 다문화 정책이 형성되는 과정을 논의한다. 진행 단계에서는 다문화담론의 형성과정과 다문화담론이 다양하게 이루어지는 분화과정, 그리고 부문별로 이루어지던 다문화담론의 정책화되는 과정이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1570-1575
• /
• 2007

The cold-forging process analysed in this paper deals with the cam bolt of a nonaxisymmetric shape which mainly is used as a part in the steering system of a vehicle for the purpose of adjusting shock absorb. So both strength and endurance are very important for the cam bolt. In this study, cam bolt forging process is composed of four stage processes. For three forging stages, shape of workpiece will be eccentrical. And then bolt head and washer of eccentrical shape is created in last stage. 3D finite element analysis repeatedly has been performed with changing dimension of die to obtain adequate former multi forging process and die shape. Simulation results reviewed have influence on deciding design of die and forging process. As a result, Simulation results have provided a direction to improve the process.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.347-352
• /
• 2002

The Cut off-type progressive die for U-bending production part is a very specific division. This study reveals the sheet metal forming process with multi-forming die by Center Carrier type feeding system. Through the FEM simulation by DEFORM, it was accepted to u-bending process as the first performance to design of strip process layout. The next process of die development was studied according to sequence of die development, i.e. die structure, machining condition for die making, die materials, heat treatment of die components, know-how and so on. The feature of this study is the die development of scrapless progressive die of multi-stage through the Modeling on the I-DEAS program, components drawing on the Auto-Lisp, CAD/CAM application, ordinary machine tool operating and revision by tryout.