• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.108-108
• /
• 2022

In this study, multispectral images of wheat according to soil water state were collected, compared, and analyzed to measure the physiological response of crops to environmental stress at the individual level. CMS-V multi-spectral camera(Silios Technologies) was used for image acquisition. The camera lens consists of eight spectral bands between 550nm and 830nm. Light Reflective information collected in each band sensor and stored in digital values, and it is converted into a reflectance for calculating the vegetation index and used. According to the camera manual, the NDVI(Normalized Difference vegetation index) value was calculated using 628 nm and 752 nm bands. Image measurement was conducted under natural light conditions, and reflectance standards(Labsphere) were captured with plants for reflectance calculation. The wheat variety used Gosomil, and the wheat grown in the field was transplanted into a pot after heading date and measured. Three treatments were performed so that the soil volumetric water content of the pot was 13~17%, 20~23%, and 25%, and the growth response of wheat according to each treatment was compared using the NDVI value. In the first measurement after port transplantation, the difference in NDVI value according to treatment was not significant, but in the subsequent measurement, the NDVI value of the treatment with a water content of 13 to 17% was lowest and was the highest at 20 to 23%. The NDVI values decreased compared to the first measurement in all treatment, and the decrease was the largest at 13-17% water content and the smallest at 20-23%. Although the difference in NDVI values could be confirmed, it would be difficult to directly relate it to the water stress of plants, and further research on the response of crops to environmental stress and the analysis of multi-spectral image will be needed.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.432-435
• /
• 2004

MSC (Multi Spectral Camera) system is a remote sensing payload to obtain high resolution ground image. In this application, uniformity characteristic is important as well as GSD (Ground Resolved Distance) and SNR (Signal to Noise Ratio). MSC image chain is consisted of OM (Optical Module), CCD, Video processor, NUC and DCSU (Data Compression and Storage Unit). Each block makes and corrects MSC's nonuniformity response. This paper shows the cause of nonuniformity error and the correction scheme of MSC system from the electronic point of view.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1108-1110
• /
• 2003

MSC(Multi-Spectral Camera) which is a unique payload for KOMPSAT-2, comprises main three subsystems of PMU(Paylaod Management Unit), EOS(Electro -Optical Subsystem) and PDTS(Payload Data Transmission Subsystem). The PMU, as a main controller of MSC, performs major tasks such as interfacing with S/C(Space Craft), controlling the MSC operation, distributing and controlling of operating power to all MSC including thermal unit, etc. In this paper the H/W configurations as well as the functions of PMU are introduced and possible changes for the future development are suggested.

• 한국산업정보학회논문지
• /
• 제27권1호
• /
• pp.11-18
• /
• 2022

주간 및 야간의 보행자 감지를 위해서는 다중 스펙트럼 활용이 필수적이다. 본 논문에서는 교통사고의 위험성이 높은 교차로에서 횡단보도 근처의 보행자를 24시간 검출하기 위해 컬러 카메라 및 열화상 적외선 카메라를 사용하였다. 보행자 탐지를 위해서 YOLO v5 객체 검출기를 사용하였으며 컬러 이미지와 열화상 이미지를 동시에 사용하여 감지 성능을 향상 시켰다. 제안된 시스템은 실제 횡단보도 현장에서 확보한 주·야간 다중 스펙트럼(색상 및 열화상) 보행자 데이터 셋에서 Iou 0.5 기준 0.94 mAP의 높은 성능을 보였다.

• 대한임베디드공학회논문지
• /
• 제14권6호
• /
• pp.321-327
• /
• 2019

Spectral Beam Combining (SBC) is used for a high-power fiber laser in order to overcome the power limitation of single fiber laser. In SBC, several laser bwams with different wavelengths are combined to obtain a single-aperture beam by diffraction grating. The combining efficiency is dependent on a linewidth, beam quality and specific wavelength of each beam among others. In this paper, we consider the method of a wavelength monitoring and a feedback control of laser diodes used as seeds of laser beams to obtain optimum combining conditions. In order to measure the wavelengths of multi-beam, we use the high resolution camera and diffraction grating with 1,800l/mm. The experiment results show the possibility of feedback control of a current and temperature of multi-seed laser diodes to obtain optimum wavelengths for SBC.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1121-1123
• /
• 2003

The CCD (Charge coupled device) detector that is used to convert the light into electronic data is very important component in satellite camera. A Linear CCD Spectral detector shall be used in the MSC (Multi-Spectral Camera, to obtain data for high-resolution images) Payload. In this paper, the design concept of the CCD detector control module in the MSC CEU (Camera electronic unit) system which will be a payload on KOMPSAT is described in terms of H/W (clock speed and accuracy).

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.372-375
• /
• 2006

The MSC is a high resolution multi-spectral camera system which is mounted on the KOMPSAT-II satellite. The electro-optic camera system has a refocusing mechanism which can be used in-orbit by ground commands. By adjusting locations of some elements in optics, the system can be focused precisely. The focus mechanism in MSC is implemented with stepper motor and potentiometer. By reading the value of the potentiometer, rough position of the motor can be understood. The exact location of the motor can not be acquired because the information from the potentiometer can not be so accurate. However, before and after certain events of the satellite, like a satellite launch, the direction of the movement or order of the magnitude of the movement can be understood. In this paper, the trend analysis of the focus motor position during the ground test phase is introduced. This result can be used as basic information for the focus calibration after launch. By studying the long term trend, deviation from the best focal point can be understood. The positions of the focus motors after launch are also compared.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.97-108
• /
• 1998

Spectral reflectance of the object should be measured to predict the color of object under various illuminants. The spectral reflectance can be represented in a multi-dimension space. Generally the information of inputed image by digital camera and color scanner is represented with 3-dimension color signals such as RGB. In other to predict the color of inputed image under any illuminant, we should be estimated spectral reflectance of the object. In this paper, we described the method to predict spectral reflectance by einenvector using the skin color of printed image, confirmed availability and propriety through experiment. we estimated spectral reflectance of skin color taken by RGB color signals and than reproduced skin color according to various illuminants on CRT.

• 대한원격탐사학회지
• /
• 제18권1호
• /
• pp.53-59
• /
• 2002

The MSC is a payload on the KOMPSAT-2 satellite to perform the earth remote sensing. The instrument images the earth using a push-broom motion with a swath width of 15 km and a GSD(Ground Sample Distance) of 1 m over the entire FOV(Field Of View) at altitude 685 km. The instrument is designed to haute an on-orbit operation duty cycle of 20% over the mission lifetime of 3 years with the functions of programmable gain/offset and on-board image data compression/storage. The MSC instrument has one channel for panchromatic imaging and four channel for multi-spectral imaging covering the spectral range from 450nm to 900nm using TDI(Time Belayed Integration) CCD(Charge Coupled Device) FPA(Focal Plane Assembly). The MSC hardware consists of three subsystem, EOS(Electro Optic camera Subsystem), PMU(Payload Management Unit) and PDTS(Payload Data Transmission Subsystem) and each subsystems are currently under development and will be integrated and verified through functional and space environment tests. Final verified MSC will be delivered to spacecraft bus for AIT(Assembly, Integration and Test) and then COMSAT-2 satellite will be launched after verification process through IST(Integrated Satellite Test). In this paper, the introduction of MSC, the configuration of MSC electronics including electrical interlace and design of CEU(Camera Electronic Unit) in EOS are described. MSC Operation parameters induced from the operation concept are discussed and analyzed to find the influence of system for on-orbit operation in future.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 하계학술발표회
• /
• pp.134-135
• /
• 2003

Medium-sized Aperture Camera (MAC)는 근적도궤도(Near Equatorial Orbit) 지구관측위성 MACSAT의 주탑재체로, 우리나라의 (주)쎄트렉아이와 말레이시아의 ATSB社와 오는 2004년 발사를 목표로 공동 개발되고 있다. MAC은 push-broom 방식의 전자광학 탑재체로, 지상해상도 2.5 m를 가지는 PAN band 1개, 지상해상도 5 m를 가지는 Multi-Spectral band 4 개를 가지고, 지상의 swath width는 20 km를 가진다. (중략)