• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.71-77
• /
• 2011

This paper presents a production planning methodology for semiconductor manufacturing supply chain network with volatilities caused by uncertainties such as unstable demand and price. In order to take volatilities into account, we develop two approaches; 1) stochastic model with consideration of various cases and 2) deterministic model considering replanning cost, and propose efficient solution methods. Computational experiments show that the performance of the proposed method is superior to that of deterministic approach using various scenarios.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.1495-1499
• /
• 2010

최근에 기후변화 영향 분석을 위한 강수모의발생 기법에 대한 연구가 중요한 문제로 대두되고 있다. 기본적으로 모의된 강수량이 유역단위에서 의미 있는 값으로 수문모형에 입력자료로 활용되기 위해서는 강수지점간의 공간상관성의 유지가 매우 중요하다. 즉 지역적인 수문학적 거동을 유역단위에서 평가하기 위해서는 유역상관성을 고려할 수 있는 다지점(multisite) 모형의 개발이 필수적이다. 이러한 점에서 본 연구에서는 다지점 강수모의기법을 개발하였으며 비정상성 해석이 가능하도록 동역학적 강수모형을 구성하였다. 이를 한강유역 강수지점에 적용하여 모형의 적합성을 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.144-147
• /
• 1993

The long-term electricity resource planning of electric utility has undergone significant change during the past decade. The current resource planning can be considered as multi-objective decision making procedure under the various uncertainties such as demand growth, construction cost, fuel price, environmental regulation, plant site, financial adequacy, new technology advent and so on. This paper presents a standardized electricity resource planning scheme using the strategic planning concept. EGEAS computer model was fully applied to indentify feasible alternative plans and simulate various attribute values corresponding each alternative plan and future. As a case study, a hypothetical long-ten capacity expansion planning problem is analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.933-939
• /
• 2001

A Satellite shipping container must afford the satellite a relatively benign thermal, vibration, and particle environment that is oblivious to the extreme temperatures, sand, dust, vibrations and shocks that can accompany the transportation. In this study, we have designed a vibration isolation system of a spacecraft container that will be used to transport a satellite called KOMPSAT (KOrea Multi-Purpose SATellite) -2 from KARI (Korea Aerospace Research Institute) Taejon to its launch site. To identify the dynamic characteristics of the system, a 1/3-scaled mockup of the container was developed. A large electro-magnetic shaker (Max. 240 KN) was used to excite the mockup, and vibration signals from 20 points were collected for modal tests. Numerical simulations through CATIA 3D Modeling were performed to identify the behavior of isolation springs. The results showed that a simplified model predicts the behavior in a reasonable accuracy. Moreover, the model guides us how to design a full-scaled satellite-shipping container.

• 산업경영시스템학회지
• /
• 제18권33호
• /
• pp.45-53
• /
• 1995

The Purpose of this paper is to describe and demonstrate a quantitative procedure for evaluating alternative material handling systems that are being considered for possible purchase. The procedure considers both quantitative factors(i.e. costs) and qualitative factors(i.e. equipment productivity) that should be considered in the evaluation process. Since these factors are not always quantifiable it is necessary that the procedure be able to quantify all factors in commensurable units. This is accomplished via a modification of the Brown and Gibson model for facility site location and selection. The model was demonstrated via a case example that encompassed the derivation of performance measures for three material handling systems.

• International Journal of Contents
• /
• 제14권4호
• /
• pp.57-64
• /
• 2018

Among many UNESCO world heritage sites in Korea, "Historic Village: Hahoe" is adjacent to Nakdong River and it is imperative to monitor the water level near the village in a bid to forecast floods and prevent disasters resulting from floods.. In this paper, we propose a recurrent neural network with multiple hidden layers to predict the water level near the village. For training purposes on the proposed model, we adopt the sixth-order error function to improve learning for rare events as well as to prevent overspecialization to abundant events. Multiple hidden layers with recurrent and crosstalk links are helpful in acquiring the time dynamics of the relationship between rainfalls and water levels. In addition, we chose hidden nodes with linear rectifier activation functions for training on multiple hidden layers. Through simulations, we verified that the proposed model precisely predicts the water level with high peaks during the rainy season and attains better performance than the conventional multi-layer perceptron.

• 한국지반공학회논문집
• /
• 제23권4호
• /
• pp.33-46
• /
• 2007

HWAW 기법은 체적파 영향이 포함된 표면파를 이용하는 지표면 지반조사 기법이다. 짧은 감지기 간격을 이용하여 지반의 전단파 속도 주상도를 도출할 수 있으므로 지반 강성의 2차원 영상을 도출하는데 장점이 있다. 경사지반에 대한 HWAW 기법의 신뢰성을 수치해석을 통해 검증한 바 있으나 실제 현장에서는 지반의 정확한 전단파 속도 분포를 알 수 없으므로 기법의 실제 현장에서의 신뢰성은 검증하기가 매우 어렵다. 따라서 본 연구에서는 HWAW 기법의 현장 검증을 효율적으로 수행하고자 대상지반 지층의 구조적 형상 및 전단파 속도 분포를 알 수 있는 실대형 모형부지를 조성하였다. 모형부지의 구조적 형상은 모형부지 조성 과정 중에 측량을 통하여 확인하였으며 동적물성치는 성토 과정 중 모형부지 내에 매설된 다수의 속도계를 이용하여 획득하였다. 이렇게 획득한 모형부지의 층상구조 및 전단파 속도 분포를 바탕으로 부지의 2차원 기준 값을 결정하였으며 HWAW기법 검증 및 기타 탄성파 탐사들의 비교연구를 수행하였다. 이를 통해 HWAW기법이 다른 탄성파 탐사 기법에 비하여 현장 지반의 2차원 전단파 속도 분포를 신뢰성 있게 도출함을 확인하였다.

• 한국농공학회지
• /
• 제44권4호
• /
• pp.85-98
• /
• 2002

The purpose of this study is to develop a land use planning model (LUPM) which can be applied to development of rural villages considering their spatial expansion. The LUPM finds out and allocates the new built site required for the improvement of existing villages. in the development of LUPM, CA (cellular automata) and land suitability analysis methods were applied combinedly. The model uses basically numerical data of CIS based on grid data. Agglomerated settlement, as a type of village for simulation, was adopted. Probability of land use change for optimizing development area was calculated by the six criteria: slope. drainage characteristic, direction of slope, as absolute suitability of grid itself, distance from road. distance from stream and distance from the village center, as relative probability by neighborhood cells. Weighting values of these criteria were quantified by AHP (analytic hierarchy process) method, which is one of MCE(multi-criteria evaluation) method. The algorithm of the model was verified by three example villages: an isolation village, a village with horizontal road, and a village with nodal point of cross road

• 한국물환경학회지
• /
• 제27권5호
• /
• pp.587-596
• /
• 2011

The interest in hydrological modeling has increased significantly recently due to the necessity of watershed management, specifically in regards to lumped models, which are being prosperously utilized because of their relatively uncomplicated algorithms which require less simulation time. However, lumped models require empirical coefficients for hydrological analyses, which do not take into consideration the heterogeneity of site-specific characteristics. To overcome such obstacles, a distributed model was offered as an alternative and the number of researches related to watershed management and distributed models has been steadily increasing in the recent years. Thus, in this study, the feasibility of a grid-based rainfall-runoff model was reviewed using the flood runoff process in the Han River basin, including the ChungjuDam, HoengseongDam and SoyangDam watersheds. Hydrological parameters based on GIS/RS were extracted from basic GIS data such as DEM, land cover, soil map and rainfall depth. The accuracy of the runoff analysis for the model application was evaluated using EFF, NRMSE and QER. The calculation results showed that there was a good agreement with the observed data. Besides the ungauged spatial characteristics in the SoyangDam watershed, EFF showed a good result of 0.859.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권1호
• /
• pp.31-42
• /
• 2000

The dry deposition velocities and fluxes of air pollutants such as SO2(g), O3(g), HNO3(g), sub-micron particulates, NO3(s), and SO42-(s) were estimated according to local meteorological elements in the atmospheric boundary layer. The model used for these calculations was the multiple layer resistance model developed by Hicks et al.1). The meteorological data were recorded on an hourly basis from July, 1990 to June, 1991 at the Austin Cary forest site, near Gainesville FL. Weekly integrated samples of ambient dry deposition species were collected at the site using triple-fiter packs. For the study period, the annual average dry deposition velocities at this site were estimated as 0.87$\pm$0.07 cm/s for SO2(g), 0.65$\pm$0.11 cm/s for O3(g), 1.20$\pm$0.14cm/s for HNO3(g), 0.0045$\pm$0.0006 cm/s for sub-micron particulates, and 0.089$\pm$0.014 cm/s for NO3-(s) and SO42-(s). The trends observed in the daily mean deposition velocities were largely seasonal, indicated by larger deposition velocities for the summer season and smaller deposition velocities for the winter season. The monthly and weekly averaged values for the deposition velocities did not show large differences over the year yet did show a tendency of increased deposition velocities in the summer and decreased values in the winter. The annual mean concentrations of the air pollutants obtained by the triple filter pack every 7 days were 3.63$\pm$1.92 $\mu\textrm{g}$/m3 for SO42-, 2.00$\pm$1.22 $\mu\textrm{g}$/m-3 for SO2, 1.30$\pm$0.59 $\mu\textrm{g}$/m-3 for HNO3, and 0.704$\pm$0.419 $\mu\textrm{g}$/m3 for NO3-, respectively. The air pollutant with the largest deposition flux was SO2 followed by HNO3, SO42-(S), and NO3-(S) in order of their magnitude. The sulfur dioxide and NO3- deposition fluxes were higher in the winter than in the summer, and the nitric acid and sulfate deposition fluxes were high during the spring and summer.