• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.12
• /
• pp.3071-3095
• /
• 2013

Configuring optimization of wireless sensor networks, which can improve the network performance such as utilization efficiency and network lifetime with minimal energy, has received considerable attention in recent years. In this paper, a cross layer optimal approach is proposed for multi-source linear network and grid network under Rayleigh block-fading channels, which not only achieves an optimal utility but also guarantees the end-to-end reliability. Specifically, in this paper, we first strictly present the optimization method for optimal nodal number $N^*$, nodal placement $d^*$ and nodal transmission structure $p^*$ under constraints of minimum total energy consumption and minimum unit data transmitting energy consumption. Then, based on the facts that nodal energy consumption is higher for those nodes near the sink and those nodes far from the sink may have remaining energy, a cross layer optimal design is proposed to achieve balanced network energy consumption. The design adopts lower reliability requirement and shorter transmission distance for nodes near the sink, and adopts higher reliability requirement and farther transmission distance for nodes far from the sink, the solvability conditions is given as well. In the end, both the theoretical analysis and experimental results for performance evaluation show that the optimal design indeed can improve the network lifetime by 20-50%, network utility by 20% and guarantee desire level of reliability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.471-476
• /
• 2015

In this paper, we propose an energy efficient hybrid MAC protocol for multi-hop wireless sensor networks. The proposed MAC protocol used a hybrid mechanism, in which contention-based MAC protocol and contention free MAC protocol are combined. The sensor nodes located far from the sink node usually send few data packet since they try to send measured data by themselves. So contention-based MAC protocol is useful among them. But other nodes located near sink node usually have lots of data packets since they plays as a relay node. Contention-based MAC protocol among them is not suitable. Using contention-based MAC protocol in heavy data traffic environment, packet collisions and transmission delay may increase. In this paper, slot assignment between sender nodes by sink node is used. The proposed mechanism is efficient in energy and latency. Results showed that our MAC protocol outperformed other protocol in terms of data packet delivery delay and energy consumption.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.222-230
• /
• 2009

A sensor network is an important element of the ubiquitous and it consists of sensor fields that contain sensor nodes and sink nodes that collect data from sensor nodes. Since each sensor node has limited resources, one of the important issues covered in the past sensor network studies has been maximizing the usage of limited energy to extend network lifetime. However, most studies have only considered fixed sink nodes, which created various problems for cases with multiple mobile sink nodes. Accordingly, while maintaining routes to mobile sink nodes, this study aims to deploy the hybrid communication mode that combines single and multi-hop modes for intra-cluster and inter-cluster transmission to resolve the problem of failed data transmission to mobile sink nodes caused by disconnected routes. Furthermore, a 2-level hierarchical routing protocol was used to reduce the number of sensor nodes participating in data transmission, and cross-shape trajectory forwarding was employed in packet transmission to provide an efficient data dissemination method.

• Journal of Communications and Networks
• /
• v.18 no.4
• /
• pp.580-588
• /
• 2016

Energy efficiency is the main objective in the design of a wireless sensor network (WSN). In many applications, sensing data must be transmitted from sources to a sink in a timely manner. This paper describes an investigation of the trade-off between two objectives in WSN design: minimizing energy consumption and minimizing end-to-end delay. We first propose a new distributed clustering approach to determining the best clusterhead for each cluster by considering both energy consumption and end-to-end delay requirements. Next, we propose a new energy-cost function and a new end-to-end delay function for use in an inter-cluster routing algorithm. We present a multi-hop routing algorithm for use in disseminating sensing data from clusterheads to a sink at the minimum energy cost subject to an end-to-end delay constraint. The results of a simulation are consistent with our theoretical analysis results and show that our proposed performs much better than similar protocols in terms of energy consumption and end-to-end delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.725-732
• /
• 2013

Recently, various applications for LED lightings are growing continuously due to their better performances such as low power consumption, longer life time, operation speed, controllability, high quality color rendering, and sustainability. However, in developing the high-powered LEDs illumination system, heat-sink problem is one of the important obstacle. In this paper, a heat-sink design with multi-layered structure for high-powered LEDs is proposed, which is composed of metal core PCB, heat-pipes, heat-sink plates, and fans. And also, in this paper, a design for LED controls using DMX512 protocols through RS-485 communications is proposed, which is considered as de facto international standard in LEDs illumination control and is widely used in landscape lighting and stage lighting. In this paper, LED control and its application techniques are introduced and the method of wireless remote control for main controller is proposed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.6
• /
• pp.152-158
• /
• 2013

The purpose of this study is to investigate cooling performance of high power LEDs from 100 to 200 W class by using a jet impingement cooling module. The numerical analysis of forced convection cooling inside cooling module is carried out using a multi-purpose CFD software, FLUENT 6.3. In the experiments, the LED cooling system consists of jet impingement module, heat exchanger, water reservoir, and pump. In the present study, the cooling performance of jet impingement cooling module is investigated to determine the effect of the heat sink types on the impinging surface, the space and length of fins. Numerical and experimental studies show the reasonable agreement of LED metal PCB temperature between those results and give the optimized design parameters such as the space of fin and the length of fin. Also, the pin fin type of heat sink is found to be more efficient than the plate type heat sink in jet impingement cooling.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.64-72
• /
• 2009

Previous research on sensor networks mainly focused on efficient transmission of data from sensors to fixed sink nodes. Recently there has been active research on mobile sink nodes, but the re-search of an environment where both fixed sink nodes and mobile sinks are present at the same time is rather scarce. This paper proposes a technique for context gathering by mobile devices with the sink functionality added through fixed sinks under a previously built, cluster based multi hop sensor network environment. To this end, clustering of mobile devices were done based on the fixed sinks of a previously built sensor network, and by using appropriate fixed sinks, context gathering was made possible. By mathematical comparison with TTDD routing protocol, which was proposed for mobile sinks, it was conformed that performance increases in energy with the number of mobile sinks, and with the number of movements by mobile devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.850-857
• /
• 2005

Sensor networks consist of sensor nodes with small size, low cost, lowpower consumption, and multi-functions to sense, to process and to communicate. The main issue in sensor networks has been focused on minimizing power consumption of sensors to maximize network life time. In some critical applications, however, the most important issue is to transmitsensing information to the end user (the sink node) with reliability. Reliable information forwarding using multiple paths in sensor networks (ReinForM) has been proposed to achieve desired reliability in the error-prone channel, but it needs increasing transmission riverhead as the channel error rate becomes high and the number of hops between the source node and the sink node increases. In this paper, we propose a reliable transmission rnechanissmusing intermediate source nodes in sensor networks (ReTrust) to reduce packet overhead while keeping the desired reliability. ReTrust has beenshown to provide desired reliability and reduced overhead via simulationsand analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1043-1049
• /
• 2009

Broadcast of sink node is used for network management, data collection by query and synchronization in wireless sensor networks. Simple flooding scheme induces the broadcast storm problem. The MPR based broadcast schemes reduce redundant retransmission of broadcast packets. MPR is a set of one hop neighbor nodes which have to relay broadcast message to cover all two hop neighbors. Though MPR can reduce redundant retransmission remarkably, it still suffers from energy waste problem caused by collision and duplicate packets reception. This paper proposes a new MPR based sink broadcast scheme using 3-channel. The proposed scheme reduces energy consumption by avoiding duplicate packet reception, while increases reliability by reducing collision probability remarkably. The results of analysis and simulation show that the proposed scheme is more efficient in energy consumption compared to the MPR based scheme. The result also shows that the proposed scheme reduces delivery latency by evading a contention with other relay nodes and improves reliability of broadcast message delivery by reducing collision probability.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2477-2487
• /
• 2021

To improve safety analysis technology for a nuclear reactor containment considering an interaction between a reactor coolant system (RCS) and containment, this study aims at an experimental investigation on the integrated simulation of the RCS and containment, with an integral effect test facility, ATLAS-CUBE. For a realistic simulation of a pressure and temperature (P/T) transient, the containment simulation vessel was designed to preserve a volumetric scale equivalently to the RCS volume scale of ATLAS. Three test cases for a steam line break (SLB) transient were conducted with variation of the initial condition of the passive heat sink or the steam flow direction. The test results indicated a stratified behavior of the steam-gas mixture in the containment following a high-temperature steam injection in prior to the spray injection. The test case with a reduced heat transfer on the passive heat sink showed a faster increase of the P/T inside the containment. The effect of the steam flow direction was also investigated with respect to a multi-dimensional distribution of the local heat transfer on the passive heat sink. The integral effect test data obtained in this study will contribute to validating the evaluation methodology for mass and energy (M/E) and P/T transient of the containment.