• 품질경영학회지
• /
• 제36권2호
• /
• pp.9-19
• /
• 2008

Spare part problem of MIME (Multi Indenture Multi Echelon) system under availability constraint has been studied for several decades. In most of existing studies, it was very difficult to obtain the optimal numbers of spare parts and some approximate methods were proposed under many restrictions. In this paper, we consider a simulation to estimate the total cost rate and system availability and a genetic algorithm to obtain the optimal numbers of spare parts. Some numerical examples are also studied.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.979-980
• /
• 2004

A multi-channel mechanical test machine for HANARO was designed and fabricated based on the design criteria of the multi-channel mechanical test machine sustained at the working conditions of $<400{\square}$, 3 W/g of gamma heating rate, $5{\times}10^{20}\;n/cm^2$, neutron flux and maximum load of 200 MPa. The multi-channel mechanical test machine made of 304 stainless steel consisted of four modules. Two of them locate upper part of the machine and the others locate lower part with 90 degree rotation. Each module was evaluated by determine load-displacement curve of zirconium specimen. Thermal insulators were also made by electron spark-machining of pure aluminum which was prepared in a domestic company.

• 한국항공운항학회지
• /
• 제15권4호
• /
• pp.17-23
• /
• 2007

This paper describes the flow and performance characteristics inside the post-chamber of the multi-port hybrid rocket motor. Using the computational fluid dynamics (CFD) technique, the non reactive compressible flow fields in the downstream of the fuel grain was numerically calculated. The motor performance obtained from computational results were in agreement with that conducted by the ground motor firing test. Besides, the flow field characteristics inside the post-chamber were discussed under different port numbers (1 port and 3 ports) of the fuel grain. The flow pattern showed that the performance of multi-port hybrid rocket motor having three grain ports is higher than that of the single-port one due mainly to the difference of incoming mass flow rate irrespective to the pressure field.

• 한국자동차공학회논문집
• /
• 제16권2호
• /
• pp.99-105
• /
• 2008

Multi-leaf springs are widely used for a major suspension component in many commercial vehicles. The modeling technique of multi-leaf springs is one of the most difficult problems in suspension modeling as the elements have complicated nonlinear characteristics such as a hysteresis behavior due to the friction. In this paper, hysteretic characteristics with the static and dynamic test are modeled and are simulated with three links and joints in MSC.ADAMS. Simulation results showed good agreements with test results. Using this methodology, it is expected that dynamic characteristics of suspension system with multi-leaf spring can be more accurately evaluated in vehicle dynamics.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.410-417
• /
• 2009

This paper represents a design and implementation of a digital controller for a multi-phase synchronous buck converter (SBC) using a digital signal processor (DSP). The multi-phase SBC has generally been used for a voltage regulation module (VRM) of a microprocessor because of its high current handling capability at a low output voltage. The VRM requires high control performance of tight output regulation, high slew rate, and load sharing capability of multiple converters. In order to achieve these requirements, the design and implementation of a digital control system for a multi-phase SBC are presented in this paper. The digital PWM generation, current sensing, and voltage and current controller using a DSP TMS320F2812 are considered. The experimental results are provided to show the validity of the implemented digital control system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.718-720
• /
• 2000

Turbo Code is one of the most useful and powerful channel coding technique. It is adopted in radio transmission of IMT-2000, both CDMA2000 and W-CDMA system. The performance of this code depends on many parameters such as encoder memory size, free distance of codewords, interleaver size, number of decoding iteration, and so on. This paper describes a Multi-Stage Interleaver which is used in Turbo Codes for W-CDMA channel coding. We compare the performance of a Multi-Stage Interleaver with that of Mother Interleaver. The simulation results show that Multi-Stage Interleaver performs better than Mother Interleaver in bit error rate from $10^{-3}$ to $10^{-6}$.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.168-172
• /
• 2015

In this paper, a balanced bitrate control in transcoding process based on video complexity measure for multi-view system which simultaneously shows multiple channels or video contents in single screen, is proposed. In order to consider the total quality of multiple video streams, the proposed algorithm reduces the complexity of multiple video stream and video quality differences at the same time by controlling bitrates of each stream by weighting when they are stitched for single screen. For the measure of complexity and quality differences between video streams, two different data: histogram of macroblock type and bitrate for each stream are used. The experimental result indicates that proposed algorithm decreases fluctuation of quality difference between videos in the multi-view system.

• 한국통신학회논문지
• /
• 제36권1C호
• /
• pp.22-27
• /
• 2011

본 논문에서는 하향링크 다중 사용자 Multiple Input Multiple Output (MIMO)채널 환경에서 셀 용량을 증가시키기 위한 Zero Forcing 기반의 효율적 사용자 선택 기법을 제안한다. 이 기법에서는 채널 전력이 미리 결정된 한계점을 초과하는 사용자들을 주요 그룹으로 구성한다. 100명의 사용자와 4개의 기지국 안테나를 가정한 컴퓨터 모의실험을 통해서 제안된 기법이 기존 기법보다 0.33 bps/Hz 만큼 젤 용량을 추가로 제공할 수 있음이 밝혀졌다.

• Journal of Communications and Networks
• /
• 제10권2호
• /
• pp.194-203
• /
• 2008

This paper considers the multi-input multi-output (MIMO) relay channel where multiple antennas are employed by each terminal. Compared to single-input single-output (SISO) relay channels, MIMO relay channels introduce additional degrees of freedom, making the design and analysis of optimal cooperative strategies more complex. In this paper, a partial cooperation strategy that combines transmit-side message splitting and block-Markov encoding is presented. Lower bounds on capacity that improve on a previously proposed non-cooperative lower bound are derived for Gaussian MIMO relay channels.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.88-93
• /
• 2012

This paper describes the machinability of the sintered carbide and tool-die steel(STD-11) by electric discharge drilling with various tubular electrodes which have multi-holes. Various types of electrode which have different diameters and materials are used with the application of continuous direct current and axial electrode feed. Inner part of electrodes are inserted with smaller tubes or Y-channel or bar. In ED-Drilling, the dielectric flushed down the interior of the rotating tube electrode, in order to remove machining debris from the hole. As result of experiments, the bigger the diameter of the electrode is, the lower the material removal rate is. Machinability of copper electrode is higher than that of brass. In machining of sintered carbide, to use oil is better than distilled water as dielectric.