• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.6
• /
• pp.675-681
• /
• 2015

When many holes on a plane are machined simultaneously, the positional precision and machining efficiency are very important. Multi-spindle heads are typical order making products of which the number of shafts and hole positions vary depending on the size or form of the product. For the automatic design of multi-spindle heads, the design modules for power transmission systems for drive, idle, and spindle shafts were developed, and a design technique the determining the optimum position and number of idle shafts according to gear positions was developed. In addition, for the precise determination of the multi-spindle head, the design methods for the guide planes of columns, and feed mechanisms were devised. In addition, the design modules for accurate clamping and automatic transportation mechanisms were developed. Finally, in order to simplify and standardize the design process, the design analysis and simulation verification modules are integrated.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.5
• /
• pp.36-41
• /
• 2008

Multi-ply sheet forming has many advantages including the possibility of using wide range of materials in a given structure, lowering production cost, making higher grammage products and so on. But, incorrect structure of sheet makes flow resistance higher so that it shows poor dewatering in press section. One of major factors that affect sheet structure and dewatering property is fines content in each layer. We, therefore, examined the press dewatering of multi-ply sheet that has the different fines content in each layer and the effect of fines distribution on physical properties of sheet to find a technology for optimum utilization of raw materials. In case of two layered sheet, the sheet which was composed of layers with the different flow resistance showed higher dewatering rate than one which has the same flow resistance. And the more difference in fines content for layers existed, the more dewatering occurred. For three layered sheets, dewatering is mainly dependent on fines content of bottom layer. Strength properties were affected by dewatering degree and multi-ply sheet structure.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.3
• /
• pp.438-451
• /
• 2018

This study analyzed differences in awareness, attitude, and purchase intention for multi-brand stores among fashion lifestyle groups. A questionnaire survey was conducted between September 12th and September 30th 2016 with women in their 20s to 40s living in the Seoul metropolitan area, Busan, Gyeongnam area, Daegu, and Gyeongbuk area. Data were collected from 417 women and analyzed using factor analysis, cluster analysis, analysis of variance and a Duncan test. The results of this study are summarized as follows. First, the result of factor analysis showed that fashion lifestyle was divided into five factors such as individuality orientation, practicality orientation, conspicuous orientation, fashion orientation, and economic orientation. The respondents were classified into economic pursuit group, individuality seeking group, active fashion seeking group and practicality seeking group according to fashion lifestyle factors. Second, there were significant differences in awareness, attitude, and purchase intention of multi-brand stores among fashion lifestyle groups. Fashion seeking group was more aware of, had a positive attitude toward, and purchased more fashion products in multi-brand stores than other groups.

• Journal of Korean Institute of Industrial Engineers
• /
• v.5 no.2
• /
• pp.9-14
• /
• 1979

Inventories of finished products exist in each stage of the channel between production and consumption. An inventory has several functions, which make it possible to produce by economic lot size and to elevate services for consumer by shortening delivery time, etc$\cdots$. Finished products may be inventoried in delivery-center as well as at the plant where production takes place. So, finshed products must be dealt with as multistage inventory problem, because an inventory functions differently according to its place. The purpose of this study is to determine how much to carry in stock and what stage to carry Though there may be several channels between production and consumption, this study deals with only one main channel, that is, series of ncomponents and determines the optimal inventory policy by introducing the concept of selling probabilities.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.332-339
• /
• 2005

We developed a similar product recommendation system for implementing a collaborative commerce model between the cooperating companies. The system is based on a similar product finding algorithm. The main idea of the proposed algorithm is using a multi-attribute decision making(MADM) to find the utility values of products in same product class of the companies. Based on the values we determine what products are similar. The system helps the companies to recommend products in accordance with the customer's preferences regarding product specifications.

• IE interfaces
• /
• v.16 no.3
• /
• pp.280-290
• /
• 2003

Many firms are trying to optimize their production and distribution functions separately, but possible savings by this approach may be limited. Nowadays, it is more important to analyze these two functions simultaneously by trading off the costs associated with the whole. In this paper, I treat a production and distribution planning problem for single-period inventory products comprised of a single production facility and multiple customers, with the aim of optimally coordinating important and interrelated decisions of production sequencing and vehicle routing. Then, I propose a hybrid genetic algorithm incorporating several local optimization techniques, HGAP, for integrated production-distribution planning. Computational results on test problems show that HGAP is effective and generates substantial cost savings over Hurter and Buer's decoupled planning approach in which vehicle routing is first developed and a production sequence is consequently derived. Especially, HGAP performs better on the problems where customers are dispersed with multi-item demand than on the problems where customers are divided into several zones based on single-item demand.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.2
• /
• pp.65-74
• /
• 1993

In this paper, a two-echelon production-inventory model is developed which integrates the production scheduling problem of the multi-products produced on a single facility and the inventory problem of the related raw materials. The setup costs of the final products are assumed to be dependent on the production sequence. The aim is to determine simultaneously the production cycle time and the production sequence of the final products, and the procurement cycle times of the raw materials. For the model developed, a solution algorithm is suggested and illustrated with a numerical example. And the result is compared with those obtained by two separate subproblems.

• International Journal of Human Ecology
• /
• v.7 no.1
• /
• pp.77-83
• /
• 2006

The ability to customize garments for fit in the apparel industry is directly tied to the availability of comprehensive and accurate sets of anthropometrical data for each consumer. The data for apparel sizing systems is available from three major standard/ research organizations: ASTM (American Society for Testing and Materials), ISO (International Standard Organization), and NCHS (National Center for Health Statistics). However, these standards ignore various head shapes and are outdated for the development future head products. This creates a data gap an ever changing multi-cultural society such as the United Sates. Although major government and industry safety organizations recognize the importance of safety for head products, few studies were found to support their reasoning. The purpose of this study is to provide accurate head dimension data for developing safety head products by analyzing various head shapes in the United Sates which includes various ethnic backgrounds. This study was carried out on 105 males in the United States. Factor analysis, cluster analysis, Moreover, Duncan analysis were all used for analyzing various head shapes.

• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.3
• /
• pp.240-247
• /
• 2005

Today's hightech society requires thousands of different products which ultimately result in billions of tons of materials discarded, most of which end up in landfills. Therefore industrial circles could not help thinking about environmental problems by regulations of government or pressures of consumer. Generally, the related research subjects are classified into both of environmentally conscious manufacturing and product recovery, where product recovery aims to minimize the amount of waste sent to landfills by recovering materials and parts from old or outdated products by means of recycling and remanufacturing (including reuse of parts and products). In this research, we constructed a model for remanufacturing various goods using a single facility and developed a dynamic programing(DP) algorithm based upon the optimal solution characterization. We showed the efficiency of the developed DP algorithm with a numerical example.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.6
• /
• pp.64-70
• /
• 1999

Family injection molding of plastic is widely used to enhance productivity. Runners for molded products in fami-ly injection molding have to be balanced so that each of the producs is filled completely at the same time,. In this study computer simulations were performed to determine balanced circular section runners in family injection molding with two cavities where each of he cavity shapes is like a case. It was found from the computer simula-tions that runner balance could be fulfilled only by modifying runner diameters. But in order to get more quality molded products other process factors such as flow length flow resistance shapes of products and etc, should be taken in to consideration for the design of a family injection molding process.