• Title/Summary/Keyword: Multi-Link

Search Result 778, Processing Time 0.033 seconds

A Routing Scheme for Multi-Classes in Multi-hop LEO Satellite Networks with Inter-Satellite Links (위성간 링크를 가지는 다중 홉 저궤도 위성망에서 멀티 클래스 지원을 위한 경로 배정 기법)

  • Lee, Bong-Ju;Kim, Young-Chon
    • Journal of IKEEE
    • /
    • v.7 no.1 s.12
    • /
    • pp.80-87
    • /
    • 2003
  • This paper proposes a routing scheme for multi-hop LEO satellite networks with inter-satellite links aiming for reducing the number of link handovers while keeping the efficient use of network resource. The proposed routing scheme controls the link handovers by taking account of the deterministic LEO satellite system dynamics, geographical location of a ground terminal and statistic information of call duration. The performance of the proposed routing scheme has been evaluated and compared with previous routing schemes in terms of average number of link handovers during a call, the call blocking and dropping probability, and the network utilization.

  • PDF

Retransmission Persistence Management with ARQ in Multi-Hop Wireless Network (무선 멀티 홉 환경에서 ARQ를 통한 재전송 지속성 관리 기법)

  • Oh, Bong-Hwan;Kim, Seog-Gyu;Lee, Jaiyong
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.39B no.10
    • /
    • pp.674-683
    • /
    • 2014
  • Multi-hop wireless networks has become common phenomenon according to a development of wireless communications and an increase of usage of wireless link. ARQ is one of the common protocols in link layer and can improve a link performance recovering packet loss in wireless link. However, ARQ cannot sufficient to assure a end-to-end performance because ARQ only manages the ARQ's own link. In this paper, we propose a new retransmission persistence for ARQ in multi-hop wireless network to satisfy the end-to-end performance. The proposed scheme can aware a bottleneck link according to the exchange of link information between ARQs and can support the end-to-end performance by managing a retransmission persistence. OPNET simulator is used to evaluate the performance of the proposed scheme and results show that proposed scheme can improve the end-to-end performance with satisfying a requirement of entire wireless section.

Constructing Negative Links from Multi-facet of Social Media

  • Li, Lin;Yan, YunYi;Jia, LiBin;Ma, Jun
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.11 no.5
    • /
    • pp.2484-2498
    • /
    • 2017
  • Various types of social media make the people share their personal experience in different ways. In some social networking sites. Some users post their reviews, some users can support these reviews with comments, and some users just rate the reviews as kind of support or not. Unfortunately, there is rare explicit negative comments towards other reviews. This means if there is a link between two users, it must be positive link. Apparently, the negative link is invisible in these social network. Or in other word, the negative links are redundant to positive links. In this work, we first discuss the feature extraction from social media data and propose new method to compute the distance between each pair of comments or reviews on social media. Then we investigate whether we can predict negative links via regression analysis when only positive links are manifested from social media data. In particular, we provide a principled way to mathematically incorporate multi-facet data in a novel framework, Constructing Negative Links, CsNL to predict negative links for discovering the hidden information. Additionally, we investigate the ways of solution to general negative link predication problems with CsNL and its extension. Experiments are performed on real-world data and results show that negative links is predictable with multi-facet of social media data by the proposed framework CsNL. Essentially, high prediction accuracy suggests that negative links are redundant to positive links. Further experiments are performed to evaluate coefficients on different kernels. The results show that user generated content dominates the prediction performance of CsNL.

Design and Implementation of Multi-rate Broadcast based Link Quality Measurement for WLAN Mesh Network (다중 전송률을 반영한 무선랜 매쉬 링크 품질 측정방법의 설계 및 구현)

  • Lee, Duck-Hwan;Yang, Seung-Chur;Kim, Jong-Deok
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.36 no.9A
    • /
    • pp.801-808
    • /
    • 2011
  • We propose MBAP(Multi-rate Broadcast Active Probing) technique to get the right measurements for link quality in Wireless Mesh Network (WMN). Most routing protocols for WMN make use of link quality-aware routing metrics, such as ETX(Expected Transmission Count) and ETT(Expected Transmission Time), while the hop count is usually used in MANET (Mobile Ad-hoc NETwork). A broadcast based active proving technique is adopted in the previous studies to get the ETX or ETT of a link. However this technique does not reflect the multi-rate feature of WLAN because it uses a single fixed transmission rate for broadcast which usually differs from the actual rate used in data transmissions. MBAP overcomes this shortage by exploiting various rate broadcast frames for probing. We implement MBAP on linux system by modifying WLAN driver and related kernel sub-systems. Experimental results show that MBAP can capture link quality more accurately than the existing techniques.

Basic Characteristic of 5-level Inverter with Different Divided DC Link Voltage

  • Matsuse, Kouki;Matsumoto, Takafumi;Kodera, Yuji
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • v.2 no.2
    • /
    • pp.179-183
    • /
    • 2013
  • This paper report on experimental results of 5-level inverter by DC divided link voltage. We have alreday reported that DC divided link valtage comes to be able to reduse harmonic of out line voltage. So we tested whether DC divided link voltage can reduce harmonics in experimental setup. This paper shows simulation results and experimental results. And we confirmed that DC divided link voltage can also apply in experimental setup.

Fundamental Output Voltage Enhancement of Half-Bridge Voltage Source Inverter with Low DC-link Capacitance

  • Elserougi, Ahmed;Massoud, Ahmed;Ahmed, Shehab
    • Journal of Power Electronics
    • /
    • v.18 no.1
    • /
    • pp.116-128
    • /
    • 2018
  • Conventionally, in order to reduce the ac components of the dc-link capacitors of the two-level Half-Bridge Voltage Source Inverter (HB-VSI), high dc-link capacitances are required. This necessitates the employment of short-lifetime and bulky electrolytic capacitors. In this paper, an analysis for the performance of low dc-link capacitances-based HB-VSI is presented to elucidate its ability to generate an enhanced fundamental output voltage magnitude without increasing the voltage rating of the involved switches. This feature is constrained by the load displacement factor. The introduced enhancement is due to the ac components of the capacitors' voltages. The presented approach can be employed for multi-phase systems through using multi single-phase HB-VSI(s). Mathematical analysis of the proposed approach is presented in this paper. To ensure a successful operation of the proposed approach, a closed loop current controller is examined. An expression for the critical dc-link capacitance, which is the lowest dc-link capacitance that can be employed for unipolar capacitors' voltages, is derived. Finally, simulation and experimental results are presented to validate the proposed claims.

High Speed Serial Link Transmitter Using 4-PAM Signaling (4-PAM signaling을 이용한 high speed serial link transmitter)

  • Jeong, Ji-Kyung;Lee, Jeong-Jun;Burm, Jin-Wook;Jeong, Young-Han
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.11
    • /
    • pp.84-91
    • /
    • 2009
  • A high speed serial link transmitter using multi-level signaling is proposed. To achieve high data rate m high speed serial link, 4-pulse amplitude modulation (PAM) is used. By transmitting 2 bit data in each symbol time, high speed data transmission, two times than binary signaling, is achieved. The transmitter transmits current-mode output instead of voltage-mode output Current-mode output is much faster than voltage-mode output, so higher data transmission is available by increasing switching speed of driver. $2^5-1$ pseudo-random bit sequence (PRBS) generator is contained to perform built-in self test (BIST). The 4-PAM transmitter is designed in Dongbu HiTek $0.18{\mu}m$ CMOS technology and achieves 8 Gb/s, 160 mV of eye height with 1.8 V supply voltage. The transmitter consumes only 98 mW for 8 Gb/s transmission.

Mesh Network Implementation using DWDS-based Link Layer Routing (DWDS 기반의 링크 계층 라우팅을 통한 메쉬 네트워크 구현)

  • Yoon, Mi-Kyung;Yang, Seung-Chur;Kim, Jong-Deok
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.35 no.2A
    • /
    • pp.165-173
    • /
    • 2010
  • WMN(Wireless Mesh Network) is an wireless backbone network technology that is an easily configurable network in the low cost compared to the wireless LAN(Local Area Network). Most of the previous researches have evaluated their algorithms by the simulations rather than by the implementation. There exist some implementation papers, however, they have the limitations of the flexibility on the link establishment and the link quality utilization. Consequently, the benefit of the WMN - configuration flexibility is degraded and the performance deterioration occurs in the multi-hop wireless environment. In this paper, we introduce a Linux-based link layer Wireless Mesh Routing System - WBMR. The design and implementation of WBMR provides the dynamic link establishment and the effective multi-channel usage. We have modified the ntroof the original WLAN operation for the dynamic link establishment, and the Linux bridge for the link layer routing. The result of performance evaluation verifies that our WBMR supports fast self-configuration and increases data transmission throughput compared to the other researches of the wireless multi-hop environment.

Performance Analysis of Multi-Link Switching Method with Concurrent Processing Function (병행처리 기능을 갖는 멀티링크 스위칭기법의 성능 분석)

  • 유동관
    • Journal of the Korea Society of Computer and Information
    • /
    • v.6 no.2
    • /
    • pp.84-89
    • /
    • 2001
  • In this paper, an improved protocol of Multi-Link Switching Method is proposed by supplementing a concurrent processing function. This protocol is proposed to complement the shortcomings of the conventional Multi-Link Switching Method which is used for the medium access in LAN. We analyzed the improved protocol in channel utilization viewpoint and compared the result with that of the conventional protocol From this result, we showed that the channel utilization of the improved protocol is superior to that of the conventional protocol when the maximum normalized propagation delay is increased.

Approximate Synthesis of 5-SS Multi Link Suspension Systems for Steering Motion (조향 운동을 고려한 5-SS 멀티링크 현가장치의 근사 합성)

  • Kim, Seon-Pyeong;Sim, Jae-Gyeong;An, Byeong-Ui;Lee, Eon-Gu
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.25 no.1
    • /
    • pp.32-38
    • /
    • 2001
  • This paper presents an approximate synthesis of 5-SS multi link suspension for 2 D.O.F motions. In the proposed synthesis method, alteration curves of camber, toe, kingpin and caster angles are optimized during the bump rebound and the steering motions. And joint positions can be located within desired boundari es. Especially, steering motions are considered for control of kingpin offset and caster trail. Prescribed motions contain both wheel center positions and imaginary kingpin axes in the multi link type suspension. Constraint equations are formulated with di splacement matrix and velocity matrix using instantaneous screw axis.