• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1240-1255
• /
• 1996

This paper suggests power optimization technique in multi-level SCPC system as a method for efficient utilization of limited satellite power. The power optimization is realized by optimal assignment of satellite input carrier powers considering interference and noise generated in up-link and down-link. The Fletcher-Powell algorithm searching minimum(or maximum) point using gradient information is used to detemine the optimal input carrier powers. To apply Flectcher-Powell algorithm mathematical descriptions and their partial derivatives to interference and nose are presented. Because a target, which should be optimized, is satellite input carrier power, amplitude of each carrier group will be assumed to be an independent variable. The performance criterion for optimal power assignmentis classified into 4 categories with respect to CNR of destination receiver earth station to meet the requirement for various satellite link environment. Simulation results for two-level, four-level and six-level SCPC system are presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.511-516
• /
• 2000

In order to not only perform as a extreme model under the severe operating condition but also acquire more diverse and advanced control capability utilizing high compliance, active vibration control of a flexible 2-link robot manipulator are investigated. Multi variable-structured frequency shaped optimal sliding mode is proposed for the flexible robot manipulator like control system, whose control variables, an angular motion of joint and vibration of flexible link, have to be controlled simultaneously by one control torque at a driving joint. The control system is divided into two subsystems, a control input related subsystem and an added subsystem. The proposed sliding mode, composed of multi control variables, makes optimized relation between subsystems and a individual control input, thus, the sliding mode controller can compensate whole dynamics of each subsystems simultaneously. And the possibility and effectiveness are verified by vibration control of a manipulator having two flexible links. Simulation and experiment results show that the proposed control scheme achieves the purpose effectively.

• 전력전자학회논문지
• /
• 제18권5호
• /
• pp.422-428
• /
• 2013

Recently, we use a static synchronous compensator(STATCOM) with cascaded H-bride topologies, because it is easy to increase capacity and to reduce total harmonic distortion(THD). When we use equipment for reactive power compensation, dc-link voltage unbalances occur from several reasons although loads are balanced. In the past, switching pattern change of single phase inverter and reference voltage magnitude change of inverter equipped with power sensor have been used for dc-link voltage balance. But previous methods are more complicated and expensive because of additional component costs. Therefore, this paper explains reasons of dc-link voltage unbalance and proposes solution. This solution is complex method that is composed of reference voltage magnitude change of inverter without additional hardware and shifted phase angle of inverter reference voltages change. It proves possibility through 1000[KVA] system simulation.

• 한국통신학회논문지
• /
• 제28권8B호
• /
• pp.674-682
• /
• 2003

This paper presents the studies on wireless channel modeling and reverse link synchronization of CATV. This paper analyzes multi-path fading channel to the cause of signal distortion in the wireless communication environment. We represent the microwave link characteristics according to the channel model. Multi-path channel can affect fading.

• Journal of information and communication convergence engineering
• /
• 제14권1호
• /
• pp.21-25
• /
• 2016

N-screen is a promising technology to improve support for multimedia multicasting, content sharing, content mobility, media scalability, and seamless mobility. In this paper, the WiMedia distributed-MAC (D-MAC) protocol is adopted for development of a seamless N-screen wireless service. Furthermore, to provide a multi-hop, one source multi-use N-screen service through point to point streaming in a seamless D-MAC protocol, a dynamic multi-frame transmission technology is proposed. In this technology, a dynamic time slot allocation scheme and a multi-hop resource reservation scheme are combined. In the proposed dynamic time slot allocation scheme, two thresholds, a hard threshold and a soft threshold, are included to satisfy the power consumption and delay requirements. A multi-frame DRP reservation scheme is proposed to minimize end-to-end delay during the multi-hop transmissions between N-screen devices. The proposed dynamic multi-frame transmission scheme enhances N-screen performance in terms of the multi-hop link establishment success rate and link establishment time compared to the conventional WiMedia D-MAC system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 추계학술대회 논문집
• /
• pp.171-172
• /
• 2008

• 전기전자학회논문지
• /
• 제14권4호
• /
• pp.312-316
• /
• 2010

We describe in this paper how to facilitate ad hoc routing with a particle filter in a hostile radio environment for multi-hop wireless ad hoc networks that connect multi-robots. The proposed scheme increases a connection's throughput by exploiting alternative links without going through the procedure of route discovery when link failure happens among multi-robots' networking. The scheme is implemented by using a particle filter to find strongly connected nodes. The filter estimates the probability distribution function in a sample-based manner with N particles. The particles are associated with a weight which represents the probability of the corresponding node to be the node with the best link. At every step of the estimation, the weights of particles are calculated and particles are resampled based on the weights. Since a node with the strongest link status possesses the largest number of particles, we take this node to forward the packets.

• 한국통신학회논문지
• /
• 제38C권11호
• /
• pp.955-965
• /
• 2013

합동전술정보분배체계는 미국, 북대서양조약기구 및 기타 연합군에서 운용하고 있는 Link-16의 통신 터미널로 사용된다. 최근 민간 항공분야에서의 교통량 증가로 인해 주파수 수요가 급증함에 따라 Link-16에서 사용 중인 주파수는 다른 시스템에 재할당될 예정이며, 이는 Link-16의 성능에 영향을 미칠 것으로 예상된다. 따라서 본 논문에서는 주파수 대역 감소에 따른 Link-16 성능의 영향을 모의실험과 수치 해석을 통해 기존 성능과 비교하였다. 성능 분석 결과, Nakagami 페이딩과 부분대역 잡음 재밍 환경에서 주파수가 재할당된 Link-16은 성능이 감소됨에도 불구하고 높은 항재밍 능력을 유지하였으며, 동일 시간슬롯에서 다수 사용자들을 지원할 수 있음을 확인하였다.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.166-173
• /
• 2013

An aluminum suspension corner module is widely used in high class passenger cars to reduce vehicle weight and improve fuel economy. According to the change of material and suspension type, the evaluation of the static strength and failure mode of the corner module is important. In this study, static strength and failure mode analysis of aluminium multi-link suspension corner module is presented. Static strength test system is designed and static failure mode tests of the corner module are carried out in longitudinal, lateral, and vertical direction. From the resuls of the tests we found that the failure modes are different compare to those of the steel corner module. The static failure modes and load-displacement curves of this study will be used as a guidance in design of a passenger car aluminium multi-link suspension corner module.

• 한국산학기술학회논문지
• /
• 제10권10호
• /
• pp.2691-2695
• /
• 2009

오늘날 광통신 시스템은 거의 무한대의 대역폭을 지니게 되었으며 이를 통하여 다양한 멀티미디어 데이터들을 신속하게 전송하는데 사용되고 있다. 이러한 광통신 시스템 하에서 텍스트, 이미지 및 동영상 등 다양한 멀티미디어 데이터들을 송수신 하기 위해서는 통합된 통신서비스시스템의 사용이 필수적이다. 본 논문에서는 멀티 비디오데이타와 오디오 데이타를 한가닥의 광통신 라인으로 주고받을 수 있도록 해주는 광 MVAD(Multi-Video Audio Data)쌍방향 다채널 링크시스템을 개발하였다. 개발된 광링크 시스템은 오직 하나의 광케이블을 사용하여 광통신시스템을 구축 할 수 있으며 우수한 영상과 음향을 공급하는 광섬유 매개체로 인하여 다양한 분야에 적용이 가능하다.