한국자동차공학회논문집 (Transactions of the Korean Society of Automotive Engineers)

  • 제21권4호
  • /
  • Pages.166-173
  • /
  • 2013
  • /
  • 1225-6382(pISSN)
  • /
  • 2234-0149(eISSN)
한국자동차공학회 (The Korean Society of Automotive Engineers)
권호 표지
DOI QR코드

DOI QR Code

승용차 알루미늄 멀티링크 현가장치 코너모듈의 실험적 정강도 특성 평가

Experimental Static Strength Evaluation of a Passenger Car Aluminium Multi-link Suspension Corner Module

  • 조원용 (군산대학교 자동차부품기술혁신센터) ;
  • 최규재 (군산대학교 기계자동차공학부)
  • Cho, Wonyong (Kunsan Automotive Technology Innovation Center) ;
  • Choi, Gyoojae (School of Mechanical and Automotive Engineering, Kunsan National University)
  • 투고 : 2012.12.04
  • 심사 : 2013.01.03
  • 발행 : 2013.07.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An aluminum suspension corner module is widely used in high class passenger cars to reduce vehicle weight and improve fuel economy. According to the change of material and suspension type, the evaluation of the static strength and failure mode of the corner module is important. In this study, static strength and failure mode analysis of aluminium multi-link suspension corner module is presented. Static strength test system is designed and static failure mode tests of the corner module are carried out in longitudinal, lateral, and vertical direction. From the resuls of the tests we found that the failure modes are different compare to those of the steel corner module. The static failure modes and load-displacement curves of this study will be used as a guidance in design of a passenger car aluminium multi-link suspension corner module.

키워드

참고문헌

  1. R. Borns and D. Whitacre, "Optimizing Designs of Aluminum Suspension Components Using an Integrated Approach," SAE 2005-01-1387, 2005.
  2. D. Kang, S. Kang and W. Lee, "Development of High Strength Aluminum Hot Forging Suspension Arm," KSAE Annual Conference Proceedings, pp.2593-2596, 2009.
  3. H. S. Park, J. K. Kim, S. M. Seo, K. H. Lee and Y. C. Park, "Structural Design of a Front Lower Control Arm Considering Durability," Journal of the Korean Society of Manufacturing Process Engineers, Vol.8, No.4, pp.69-75, 2009.
  4. B. C. Song, H. S. Park, Y. M. Kwon, S. H. Kim, Y. C. Park and K. H. Lee, "Structural Design of an Upper Control Arm Considering Static Strength," Transactions of KSAE, Vol.17, No.1, pp.190-196, 2009.
  5. J. S. Koo, Y. G. Lee, J. S. Choi, D. G. Choo, S. Y. Shin and T. H. Lee, "Development of Automated Module Static Analysis System for Chassis," KSAE Annual Conference Proceedings, pp.983-986, 2006.
  6. D. C. Lee and J. I. Lee, "Structural Optimization Concept for Design of an Aluminium Control Arm," Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Vol.217, No.8, pp.647-656, 2003. https://doi.org/10.1243/09544070360692041
  7. S. P. Kim, J. K. Lee, Y. H. Oh and U. K. Lee, "The Development of Multi-link Suspensions for Hyundai Genesis," SAE 2009-01-0224, 2009.