• 제목/요약/키워드: Multi-Dimensions

검색결과 427건 처리시간 0.026초

An Longitudinal Analysis of Changing Beliefs on the Use in IT Educatee by Elaboration Likelihood Model (정교화 가능성 모형에 의한 IT 피교육자 신용 믿음 변화의 종단분석)

  • Lee, Woong-Kyu
    • Asia pacific journal of information systems
    • /
    • 제18권3호
    • /
    • pp.147-165
    • /
    • 2008
  • IT education can be summarized as persuading the educatee to accept IT. The persuasion is made by delivering the messages for how-to-use and where-to-use to the educatee, which leads formulation of a belief structure for using IT. Therefore, message based persuasion theory, as well as IT acceptance theories such as technology acceptance model(TAM), would play a very important role for explaining IT education. According to elaboration likelihood model(ELM) that has been considered as one of the most influential persuasion theories, people change attitude or perception by two routes, central route and peripheral route. In central route, people would think critically about issue-related arguments in an informational message. In peripheral route, subjects rely on cues regarding the target behavior with less cognitive efforts. Moreover, such persuasion process is not a one-shot program but continuous repetition with feedbacks, which leads to changing a belief structure for using IT. An educatee would get more knowledge and experiences of using IT as following an education program, and be more dependent on a central route than a peripheral route. Such change would reformulate a belief structure which is different from the intial one. The objectives of this study are the following two: First, an identification of the relationship between ELM and belief structures for using IT. Especially, we analyze the effects of message interpretation through both of central and peripheral routes on perceived usefulness which is an important explaining variable in TAM and perceived use control which have perceived ease of use and perceived controllability as sub-dimensions. Second, a longitudinal analysis of the above effects. In other words, change of the relationship between interpretation of message delivered by IT education and beliefs of IT using is analyzed longitudinally. For achievement of our objectives, we suggest a research model, which is constructed as three-layered. While first layer has a dependent variable, use intention, second one has perceived usefulness and perceived use control that has two sub-concepts, perceived ease of use and perceived controllability. Finally, third one is related with two routes in ELM, source credibility and argument quality which are operationalization of peripheral route and central route respectively. By these variables, we suggest five hypotheses. In addition to relationship among variables, we suggest two additional hypotheses, moderation effects of time in the relationships between perceived usefulness and two routes. That is, source credibility's influence on perceived usefulness is decreased as time flows, and argument quality's influence is increased. For validation of it, our research model is tested empirically. With measurements which have been validated in the other studies, we survey students in an Excel class two times for longitudinal analysis. Data Analysis is done by partial least square(PLS), which is known as an appropriate approach for multi-group comparison analysis with a small sized sample as like this study. In result. all hypotheses are statistically supported. One of theoretical contributions in this study is an analysis of IT education based on ELM and TAM which are considered as important theories in psychology and IS theories respectively. A longitudinal analysis by comparison between two surveys based on PLS is also considered as a methodological contribution. In practice, finding the importance of peripheral route in early stage of IT education should be notable.

A Study on the Determinant Factors for Dining at Family Restaurant in Sunchon City (순천시의 훼밀리레스토랑을 이용하는 고객들의 외식결정요인에 관한 연구)

  • 강종헌
    • Korean journal of food and cookery science
    • /
    • 제17권6호
    • /
    • pp.571-582
    • /
    • 2001
  • The purpose of this study was to identify important selection attributes of customers for dining at family restaurants, and the determinant and predicting factors in customers' intentions of revisiting. A closed-ended questionnaire was used, and a systematic sampling approach was employed to survey a sample of customers in family restaurants. A total of 124 questionnaires were used for analysis among 300 distributed. Multivariate analysis(factor and regression analysis) was performed for 19 selection attributes measured on a five-point scale. A four-dimensional structure(harmonized decoration consistent service, valuable food, and attractive facility) was established from 19 selection attributes. The results of the study showed that three dimensions were significantly related with the customer's intention of revisiting. The dimension of consistent service had the greatest impact on customers' choice. It was clear that a family restaurant manager's emphasis on only one dimension to attract customers might not be as effective as applying a multi-dimensional strategy.

  • PDF

Experimental Results of New Ion Source for Performance Test

  • Kim, Tae-Seong;Jeong, Seung-Ho;Jang, Du-Hui;Lee, Gwang-Won;In, Sang-Yeol
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.269-269
    • /
    • 2012
  • A new ion source has been designed, fabricated, and installed at the NBTS (Neutral Beam Test Stand) at the KAERI (Korea Atomic Energy Research Institute) site. The goalis to provide a 100 keV, 2MW deuterium neutral beam injection as an auxiliary heating of KSTAR (Korea Super Tokamak Advanced Research). To cope with power demand, an ion current of 50 A is required considering the beam power loss and neutralization efficiency. The new ion source consists of a magnetic cusp bucket plasma generator and a set of tetrode accelerators with circular copper apertures. The plasma generator for the new ion source has the same design concept as the modified JAEA multi-cusp plasma generator for the KSTAR prototype ion source. The dimensions of the plasma generator are a cross section of $59{\times}25cm^2$ with a 32.5 cm depth. The anode has azimuthal arrays of Nd-Fe permanent magnets (3.4 kG at surface) in the bucket and an electron dump, which makes 9 cusp lines including the electron dump. The discharge properties were investigated preliminarily to enhance the efficiency of the beam extraction. The discharge of the new ion source was mainly controlled by a constant power mode of operation. The discharge of the plasma generator was initiated by the support of primary electrons emitted from the cathode, consisting of 12 tungsten filaments with a hair-pin type (diameter = 2.0 mm). The arc discharge of the new ion source was achieved easily up to an arc power of 80 kW (80 V/1000 A) with hydrogen gas. The 80 kW capacity seems sufficient for the arc power supply to attain the goal of arc efficiency (beam extracted current/discharge input power = 0.8 A/kW). The accelerator of the new ion source consists of four grids: plasma grid (G1), gradient grid (G2), suppressor grid (G3), and ground grid (G4). Each grid has 280 EA circular apertures. The performance tests of the new ion source accelerator were also finished including accelerator conditioning. A hydrogen ion beam was successfully extracted up to 100 keV /60 A. The optimum perveance is defined where the beam divergence is at a minimum was also investigated experimentally. The optimum hydrogen beam perveance is over $2.3{\mu}P$ at 60 keV, and the beam divergence angle is below $1.0^{\circ}$. Thus, the new ion source is expected to be capable of extracting more than a 5 MW deuterium ion beam power at 100 keV. This ion source can deliver ~2 MW of neutral beam power to KSTAR tokamak plasma for the 2012 campaign.

  • PDF

Antenna-Diplexer Module for Cellular/SDMB Band Using LTCC Technology (LTCC 공법을 사용한 Cellular/SDMB 안테나-다이플렉서 모듈)

  • Ha, Jeung-Uk;Chang, Ki-Hun;Yoon, Young-Joong
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • 제18권7호
    • /
    • pp.774-783
    • /
    • 2007
  • This paper presents an integrated packaging antenna-diplexer module for wireless communication systems in the Cellular and SDMB band. The design and the realization of the proposed one are experimentally analyzed and discussed. It consists of a dual-resonance antenna and a diplexer with a multi-layer LTCC(${\varepsilon}_r=7.8,\;tan\;{\delta}=0.0043$) technology with integration capability and low loss. The dual-resonance antenna of the proposed module has the meander line structure for size reduction and has the shorting structure of an inverted F antenna to achieve good impedance matching. The diplexer of the proposed module was designed with the combination of low pass filter(LPF) and high pass filter(HPF). Decreasing the mutual interference between them provides a high isolation characteristic. The proposed antenna-diplexer module with dimensions of $27.5{\times}12.0{\times}2.2mm$ operates within a range from 813 MHz to 902 MHz for the cellular band and from 2,586 MHz to 2,655 MHz for the SDMB band. And the measured gain of the fabricated module is -1.96 dBi for Cellular band and -5.43 dBi for SDMB band. The parameters for the antenna-diplexer module are investigated and the several performances are discussed.

Joining High-Strength Steel and Al6061 Sheet Using Hole Clinching Process (Hole 클린칭을 이용한 고장력강판과 Al6061 이종소재의 접합)

  • Ahn, Nam-Sik;Lee, Chan-Joo;Lee, Jung-Min;Ko, Dae-Cheol;Lee, Seon-Bong;Kim, Byung-Min
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • 제36권6호
    • /
    • pp.691-698
    • /
    • 2012
  • The joining of aluminum and HSS (high-strength steel) by the conventional clinching process is limited by the low formability of HSS. Defects in the clinching joint, such as necking of the upper sheet, cracks, and lack of interlocking, are produced by the different ductility properties of HSS and aluminum. In this study, we propose the hole clinching process for joining Al6061 and SPFC440, in which deformation of SPFC440 is avoided by drilling a hole in the SPFC440. The dimensions of the interlocking in the hole-clinched joint necessary to provide the required joint strength were determined. Based on the volume constant of the hole clinching process, the shapes of the tools were designed by finite element (FE)-analysis. A hole clinching experiment was performed to verify the proposed process. A cross-section of the joint showed good agreement with the results of the FE-analysis. The lap shear strength was found to be 2.56 kN, which is higher than required joint strength.

Study on Performance of Vertical-axis Tidal Turbines Applied to the Discharged Channel of Power Plant (조류발전용 수직축 터빈의 방수로 설치에 따른 성능에 관한 연구)

  • Lee, Jeong-Ki;Hyun, Beom-Soo
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • 제18권4호
    • /
    • pp.274-281
    • /
    • 2015
  • Thermal and nuclear power plants on shore commonly use the sea water for cooling facility. Discharged cooling water has the high kinematic energy potential due to amount of water flux. Numerical analysis was made to find the suitable combinations between the arrangement of tidal turbines and the overall dimensions of the discharged channel. Several parameters such as the turbine diameter to inlet size, and the axial distance to turbine size were investigated. Power coefficients for various test conditions were also compared to see the effect of inlet configurations such as single inlet and dual inlet. For the single inlet, the mean power coefficient appeared to be gradually decreased with increasing distance, and the maximum power was obtained when the turbine diameter was same as the inlet diameter. For the dual inlet, the tendency was similar so that the better result when the turbine diameter was same as the inlet diameter. It is expected that the present methodology can be extensively utilized to harness the high kinetic energy flow of the discharge channel of power plant.

The preliminary study for three-dimensional alveolar bone morphologic characteristics for alveolar bone restoration

  • Cho, Hyun-Jae;Jeon, Jae-Yun;Ahn, Sung-Jin;Lee, Sung-Won;Chung, Joo-Ryun;Park, Chang-Joo;Hwang, Kyung-Gyun
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제41권
    • /
    • pp.33.1-33.7
    • /
    • 2019
  • Background: The concept of the ideal morphology for the alveolar bone form is an important element to reconstruct or restore the in maximizing esthetic profile and functional alveolar bone restoration. The purpose of this preliminary study is to evaluate the normal alveolar bone structure to provide the standard reference and guide template for use in diagnosing for implant placement, determining the correct amount of bone augmentation in actual clinical practice and producing prostheses based on three-dimensional imaging assessment of alveolar bone. Methods: This study was included 11 men and 11 women (average age, 22.6 and 24.5 years, respectively) selected from among 127 patients. The horizontal widths of alveolar bone of maxilla and mandible were measured at the crestal, mid-root, and root apex level on MDCT (multi-detector computed tomography) images reconstructed by medical imaging software. In addition, tooth dimensions of the central incisors, canines, second premolars, and first molars of maxilla and mandible, including the horizontal width of the interdental alveolar bone crest, were also measured and statistically analyzed. Results: The horizontal alveolar bone width of the palatal side of maxilla showed a distinct increment from the alveolar bone crest to the apical region in both anterior and posterior areas. The average widths of the maxillary alveolar ridge were as follows: central incisor, 7.43 mm; canine, 8.91 mm; second premolar, 9.57 mm; and first molar, 12.38 mm. The average widths of the mandibular alveolar ridge were as follows: central incisor, 6.21 mm; canine, 8.55 mm; second premolar, 8.45 mm; and first molar, 10.02 mm. In the buccal side, the alveolar bone width was not increased from the crest to the apical region. The horizontal alveolar bone width of an apical and mandibular border region was thinner than at the mid-root level. Conclusions: The results of the preliminary study are useful as a clinical guideline when determining dental implant diameter and position. And also, these measurements can also be useful during the production of prefabricated membranes and customized alveolar bone scaffolds.

An Analysis of Nursing Managerial Competencies;Military Hospital Head Nurses (병동선임간호장교의 간호관리역량 격차분석과 원인조사)

  • Lee, Sun-Mee
    • Journal of Korean Academy of Nursing Administration
    • /
    • 제3권1호
    • /
    • pp.37-50
    • /
    • 1997
  • The purpose of this study was to identify the gap between need-level and demonstration-level in nursing managerial competencies. In addition, the study proposes solutions to narrow this gap. The results of this study are as follows : 1) The mean score for need-level of each item was 4.0, and for demonstration-level, 3.5. This indicates that military hospital head nurses demonstrate a higher level of managerial competencies than the moderate level on all items. But items which were related to resource/ cost/ information managament, staff development management and professionalism management got relatively low ratings in the need-level. 2) The mean score for need-level of each category was 4.14, and for demonstration-level, 3.53. Categories on the individual dimension got a higher rating than categories on the group or organization dimension in both need-level and demonstration level. 3) The gap between need-level and demonstration-level appeared in all items(p<.05) and categories(p<.001). Although the gap was relatively low, it indicates that it is essential to plan a developmemt program for all nursing management competencies for military hospital head nurses. 4) There were significant differences in the gap between need-level and demonstration-level according to specific characteristics of the subjects. The gap did not appear in many categories on the individual dimension where the number of nursing staff was more than 10, a major grade, ICU head nurse or for head nurses having a long career. 5) Need-level and demonstration-level showed a difference according to specific characteristics of the subjects, because need-level and demonstration-level were higher where the number of nursing staff was more than 10, a major grade, and for ICU or Medical ward head nurses. The categories which showed need-level difference and demonstration-level differences according to specific characteristics of the subjects existed almostly completely in the group and organization dimension. Gap-level differences according to the number of hospital bed existed in only two categories. 6) The general causes of the gap were indicated to be 'Knowledge/ skill/ experience deficit', 'Limitation of rules and systems/ Inappropriate organizational environment' for most items, categories, and dimensions. The results of this study indicate that extensive competency developing strategies must be developed, because a gap was found in all items and categories. Specially, there is a need to concentrate attention on competencies in the group and organizational dimension which had a wider gap level. And it is important to take an individual approach according to the cause for each gap. In order to produce effective competency developing strategies, top managers must have sinsights into the importance of nursing staff development and nursing officer's efforts to develop themselves must be achieved. Further multi-dimensional(education, personnel-policy, nursing/ organizational environment) solutions to the gap must be developed and utilized.

  • PDF

Design of A Microstrip Linear Tapered Slot Antenna (마이크로스트립 선형 테이퍼형 슬롯 안테나 설계)

  • Jang, Jae-Sam;Kim, Cheol-Bok;Lee, Ho-Sang;Jung, Young-Ho;Jo, Dong-Ki;Lee, Mun-Soo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • 제45권5호
    • /
    • pp.40-45
    • /
    • 2008
  • In this paper, a microstrip linear tapered slot antenna is designed. A tapered slot antenna(TSA) has many advantages such as low profile, low weight, easy fabrication, and compatibility with monolithic microwave integrated circuits(MMIC). In addition, it has demonstrated multi octave bandwidth, moderately high gain, and symmetrical E- and H-plane beam patterns. A feed network is implemented with transition between a microstrip and a slot line for the microstrip linear tapered slot antenna. The transition is consist of two sides. One side has a microstrip line, the other side has a slot line. The dimensions of the microstrip and slot line are ${\lambda}_m/4$ and ${\lambda}_s/4$ at the center of the cross section of the microstrip and slot line. In order to get broad bandwidth antenna characteristics, the tapered length is chosen as $4{\lambda}_o$ and termination width is chosen as $1.75{\lambda}_o$. Experimental results show that the microstrip tapered slot antenna has symmetrical E- and H-plane beam patterns with around 5GHz of bandwidth at center frequency of 5.0GHz.

Region Based Image Similarity Search using Multi-point Relevance Feedback (다중점 적합성 피드백방법을 이용한 영역기반 이미지 유사성 검색)

  • Kim, Deok-Hwan;Lee, Ju-Hong;Song, Jae-Won
    • The KIPS Transactions:PartD
    • /
    • 제13D권7호
    • /
    • pp.857-866
    • /
    • 2006
  • Performance of an image retrieval system is usually very low because of the semantic gap between the low level feature and the high level concept in a query image. Semantically relevant images may exhibit very different visual characteristics, and may be scattered in several clusters. In this paper, we propose a content based image rertrieval approach which combines region based image retrieval and a new relevance feedback method using adaptive clustering together. Our main goal is finding semantically related clusters to narrow down the semantic gap. Our method consists of region based clustering processes and cluster-merging process. All segmented regions of relevant images are organized into semantically related hierarchical clusters, and clusters are merged by finding the number of the latent clusters. This method, in the cluster-merging process, applies r: using v principal components instead of classical Hotelling's $T_v^2$ [1] to find the unknown number of clusters and resolve the singularity problem in high dimensions and demonstrate that there is little difference between the performance of $T^2$ and that of $T_v^2$. Experiments have demonstrated that the proposed approach is effective in improving the performance of an image retrieval system.