• 한국경영과학회지
• /
• 제22권2호
• /
• pp.13-29
• /
• 1997

This paper considers a new routing problem, successive max-min connection ratio problem (SMCRP), arised in circuit telecommunication networks such as SONET and WDM optical transport network. An optimization model for SMCRP is established based on link-flow formulation. It's first optimization process is an integral version of maximum concurrent flow problem. Integer condition does not give the same connection-ratio of each node-pair at an optimal solution any more. It is also an integral multi-commodity flow problem with fairness restriction. In order to guarantee fairness to every node-pair the minimum of connection ratios to demand is maximized. NP- hardness of SMCRP is proved and a heuristic algorithm with polynomial-time bound is developed for the problem. Augmenting path and rerouting flow are used for the algorithm. The heuristic algorithm is implemented and tested for networks of different sizes. The results are compared with those given by GAMS/OSL, a popular commercial solver for integer programming problem.n among ferrite-pearlite matrix, the increase in spheroidal ratio with increasing fatigue limitation, 90% had the highest, 14.3% increasing more then 70%, distribution range of fatigue.
ife was small in same stress level. (2) $\sqrt{area}_{max}$ of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of $\sqrt{area}_{max}$ may be used as a guideline for the control of inclusion size in the steelmaking.

• 한국기계가공학회지
• /
• 제3권1호
• /
• pp.66-71
• /
• 2004

Magnesium alloys have been widely used for many structural components of automobiles and aircraft because of high specific strength and good cast-ability in spite of hexagonal closed-packed crystal structure of pure magnesium. In this study, it is studied about the forming characteristics of press forging of AZ31 magnesium alloy by MSC/MARC in case of material having one boss and MSC/Supeiforge in case of material having multi-boss with heat transfer analysis during deformation at elevated temperature. For these results it is simulated about temperature distribution, strain distribution, and stress distribution of AZ31 Magnesium alloy. During the press forging, foot regions of bosses showed greater temperature rise than other areas of AZ31 sheet. Finally the plastic strain of AZ31 sheet did not remarkably vary with increasing temperature from 373 to 473K, while it significantly increased as the forming temperature increased from 473 to 573K, which is related with the change in micro-structures, such as dynamic re-crystallization occurring during the deformation process.

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.155-181
• /
• 2016

In the present paper we discuss the stability and the post-buckling behaviour of thin piezoelastic plates. The first part of the paper is concerned with the modelling of such plates. We discuss the constitutive modelling, starting with the three-dimensional constitutive relations within Voigt's linearized theory of piezoelasticity. Assuming a plane state of stress and a linear distribution of the strains with respect to the thickness of the thin plate, two-dimensional constitutive relations are obtained. The specific form of the linear thickness distribution of the strain is first derived within a fully geometrically nonlinear formulation, for which a Finite Element implementation is introduced. Then, a simplified theory based on the von Karman and Tsien kinematic assumption and the Berger approximation is introduced for simply supported plates with polygonal planform. The governing equations of this theory are solved using a Galerkin procedure and cast into a non-dimensional formulation. In the second part of the paper we discuss the stability and the post-buckling behaviour for single term and multi term solutions of the non-dimensional equations. Finally, numerical results are presented using the Finite Element implementation for the fully geometrically nonlinear theory. The results from the simplified von Karman and Tsien theory are then verified by a comparison with the numerical solutions.

• 한국재료학회지
• /
• 제8권5호
• /
• pp.436-443
• /
• 1998

2.3%C-26%Cr-1%Ni-0.5%Mo 조성의 다합금계 고크롬백주철을 고주파유도용해로를 사용하여 주조한 후 응고조직, 열처리조직 및 기계적성질간의 상관관계를 연구하였다. 주방상태에서는 초정덴드라이트조직인 기지조직과 공정탄화물로 구성되어 있었으며 기지조직의 73%가 오스테나이트, 27%가 마르텐사이트조직이었다. $900^{\circ}C$에서 5시간동안 균질화열처리만 행한 시편의 경우, 기지조직은 거의 페라이트로 구성되어 있었으며 $1100^{\circ}C$에서 불안정화열처리후 강제공냉시킨 시편의 경우, 유지시간에 따라 기지조직내의 잔류오스테나이트함량은 48.9-57.6%의 범위에 놓여 있었다. 주방상태 및 열처리시편 공히 마모량과 마모시간과의 관계가 직선적으로 얻어 졌는바 마모속도는 $2.77x10^{-2}$ /$~4.12x10^{-2mg}$ /sec의 범위에 걸쳐 있었다. 주방상태의 시편이 내마모성이 가장 우수하였으며 균질화열처리만 행한 시편이 가장 열악하였다. 기지조직내 잔류오스테나이트함량의 비율이 높아짐에 따라 경도는 감소하였고 반면에 내마모성은 향상되었다. 이는 마찰마모시험시 접촉부위의 오스테나이트가 가공경화를 일으켜 마르텐사이트로 변태되었기 때문으로 사려된다.

• KIEAE Journal
• /
• 제10권6호
• /
• pp.145-151
• /
• 2010

Bearing wall system was used extensively in most multi-residential apartment buildings in Korea. However, bearing wall apartments have the lack of architectural plan flexibility, remodelling-incompatible, causing serious economic losses in terms of construction waste. Recently, many researchers have studied the use of Rahmen structure as a potential alternative. The beam-column connection in the paper for long-life apartment housing forms connection of a Rahmen structure utilizing the advantages of steel and reinforced concrete. In addition, reduction of cast-in place concrete and construction schedule is expected by using precast concrete. Reduction effect of quantity decreased construction costs and $CO_2$ emission of key construction materials. However, verifying the feasibility of new construction method entails numerous challenges. Accordingly, the purpose of this study is to analyze the construction feasibility of sleeve, coupler, and pressure welding connections for long-life apartment building structure. A 3D modeling software was used to perform the analysis, and a real scale model was created to verify the results of construction feasibility. By verifying the construction feasibility of beam-column connections, this study will contribute to the efficient application of these methods on construction sites.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.687-688
• /
• 2011

본 논문에서는 최근에 디지털논리시스템의 회로 구현시에 적용되기 시작한 분할설계기법의 한가지 방법을 제안하였다. 기존의 디지털논리회로설계기법은 적용되는 개별소자를 어떻게 효과적이며 효율적으로 이용하느냐 하는 것이 큰 목적이었으나, 최근의 전자공학의 발달과 회로의 집적도가 높아짐에 따라서 디지털논리설계기법은 각각의 모듈을 구성하고 있는 소자들의 개별소자를 사용하는 것보다는 복잡하더라도 좀 더 경제적이고 다기능의 분할설계기법이 요구되고 있다. 이러한 내용을 근간으로 본 논문에서는 효과적인 분할기법을 이용한 스위칭함수구성의 한가지 방법을 제안하였다.

• International Journal of Computer Science & Network Security
• /
• 제21권8호
• /
• pp.342-352
• /
• 2021

Multicast Routings is a big challenge due to limitations such as node power and bandwidth Mobile Ad-hoc Network (MANET). The path to be chosen from the source to the destination node requires protocols. Multicast protocols support group-oriented operations in a bandwidth-efficient way. While several protocols for multi-cast MANETs have been evolved, security remains a challenging problem. Consequently, MANET is required for high quality of service measures (QoS) such infrastructure and application to be identified. The goal of a MANETs QoS-aware protocol is to discover more optimal pathways between the network source/destination nodes and hence the QoS demands. It works by employing the optimization method to pick the route path with the emphasis on several QoS metrics. In this paper safe routing is guaranteed using the Secured Multicast Routing offered in MANET by utilizing the Ant Colony Optimization (ACO) technique to integrate the QOS-conscious route setup into the route selection. This implies that only the data transmission may select the way to meet the QoS limitations from source to destination. Furthermore, the track reliability is considered when selecting the best path between the source and destination nodes. For the optimization of the best path and its performance, the optimized algorithm called the micro artificial bee colony approach is chosen about the probabilistic ant routing technique.

• Macromolecular Research
• /
• 제12권6호
• /
• pp.581-585
• /
• 2004

A copolymer P[OSA-MI] was synthesized by copolymerization of its corresponding monomers, N-phenyl maleimide (MI) and 2-octen-l-ylsuccinic anhydride (OSA). The polymer (poly[2-[1-(2,5-dioxo-l-phenylpyrroli­din-3-ylmethyl)heptyl]-succinic acid 4-(2-$\{$ethyl-[4-(4-nitrophen-ylazo)phenyl]amino$\}$ethyl)ester]) P[DR1MA-MI] was obtained from the reaction of P[OSA-MI] with 2-[4-(4-nitrophenylazo)-N-ethylphenylamino] ethanol (DR1). A stable monolayer of P[DRIMA-MI] was formed by spreading the solution of the polymer in chloroform. In Y-type Langmuir-Blodgett (LB) films prepared using this Langmuir-Blodgett method, the second harmonic waves generated from adjacent mono layers canceled each other out. In X-and Z-type LB films, the second harmonic intensity increased upon increasing the number of monolayers, but this increase was somewhat smaller than predicted by the square law. This phenomenon is due to defects or imperfect alignment of the dipoles in the LB film. The generation of second harmonic waves from Y-type LB films having an even number of mono layers supports this argument. The degree of imperfection seemed to increase as the number of layers increased. The second-order nonlinear optical properties of spin-cast films of these polymers were also measured. The largest second harmonic coefficient of the poled P[DRIMA-MI] film coated on a glass plate was 19 pm/V.

• 한국물환경학회지
• /
• 제34권1호
• /
• pp.67-76
• /
• 2018

There are 34 mega-cities with a population of more than 10 million in the world. One of the highly populated cities in the world is Seoul in South Korea. Seoul receives $1,140million\;m^3/year$ for domestic water, $2million\;m^3/year$ for agricultural water and $6million\;m^3/year$ for industrial water from multi-purpose dams. The maintenance water used for water conservation, ecosystem protection and landscape preservation is $158million\;m^3/year$, which is supplied from natural precipitation. Recently, the use of the other water for preservation of water quality and ecosystem protection in urban areas is increasing. The objectives of this study is to develop the seasonal forecast method of environmental water in urban areas (Seoul, Daejeon, Gwangju, Busan) and to evaluate its predictability. In order to estimate the seasonal outlook information of environmental water from Land Surface Model (LSM), we used the observation weather data of Automated Synoptic Observing System (ASOS) sites, forecast and hind cast data of GloSea5. In the past 30 years (1985 ~ 2014), precipitation, natural runoff and Urban Environmental Water Index (UEI) were analyzed in the 4 urban areas. We calculated the seasonal outlook values of the UEI based on GloSea5 for 2015 year and compared it to UEI based on observed data. The seasonal outlook of UEI in urban areas presented high predictability in the spring, autumn and winter. Studies have depicted that the proposed UEI will be useful for evaluating urban environmental water and the predictability of UEI using GloSea5 forecast data is likely to be high in the order of autumn, winter, spring and summer.

• 한국통신학회논문지
• /
• 제41권8호
• /
• pp.917-920
• /
• 2016

전통적 도래각 추정기법[1]과 별개로 2004년 이후 입사신호의 입사방향은 공간 영역에서 희소도(sparsity)를 가짐을 이용한 도래각 추정 기법이 제안되었다. 압축센싱 기반 도래각 추정 알고리즘인 SpSF 알고리즘에 이용되는 비용함수는 비선형 다변수 최적화문제이다. 적절한 변환을 통하여 해당 비용함수는 볼록 최적화 (convex optimization) 문제로 표현할 수 있다. 볼록 최적화 문제는 제한조건이 있는 최적화 문제이며 제한조건에 포함되는 상수를 지정해야 한다. 본 연구에서는 제한조건에 포함되는 사용자지정 상수값 결정법을 제안한다. 잡음의 실수부와 허수부가 서로 독립인 평균 0인 정규분포를 따름을 이용하여 제한조건에 포함되는 행렬의 Frobenius norm의 평균을 유도할 수 있으며, 이를 이용하여 제한조건에 포함되는 상수를 결정할 수 있다. 제안된 방법에 의해 결정된 상수를 이용한 SpSF 알고리즘이 실제로 동작함을 보였다.