• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.359-362
• /
• 2001

본 논문에서는 광학센서와 적외선 센서를 사용하는 Multi-sensor 시스템에서 영상 정보를 통한 물체의 추적 및 인식에 필요한 영상을 분리하는데 필요한 전처리와 object 기반의 추적 방법을 제안하였다. 일반적인 추적 알고리즘의 목표는 consistency를 유지하는데 있다. 그러나 인식에 필요한 영상을 분리하기 위해서는 물체의 범위를 정확히 판단 할 수 있는 능력이 중요하다. 이를 위해 CCD와 IR영상에 동시에 적용 가능한 전처리 기법과 object 기반의 two-step 추적 알고리즘을 통해 consistency외에도, 물체의 범위를 estimation하여 인식에 필요한 범위를 분리해 낸다. 본 논문에서는 ITS 의 ETCS application을 위해 이종 센서인 CCD와 IR의 야간 차량 영상정보를 이용하여 알고리즘을 test 하였다.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.1
• /
• pp.88-95
• /
• 2005

Direct Georeferencing by combined multi-sensor based on the direct measurement of the projection centers and rotation angle of sensor through loading the GPS and INS in aircraft. The method of combined multi-sensor can offer us to acquire the exterior orientation parameters with only minimum GCPs, even the ground control process could be completely skipped. Consequently, It is possible extreme to reduce the time and expense for the mapping process. In this study, a CCD camera is simultaneously used in combined multi-sensor surveying, and acquired CCD image through Direct Georeferencing produce digital orthoimage. In this process, methods of combining sensor and digital orthoimage are examined and estimated. For the comparison of the positioning accuracy digital orthoimage through Direct Georeferencing, GCPs determined by GPS surveying are used. Two digital orthoimage are produced; one with a few GCP and the other without them. The accuracy of orthoimages produced through combined multi-sensor with GCPs meets that of 1:1,000 maps. Without GCPs, it meets that of 1:5,000 maps.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.53-56
• /
• 2010

An aerial multi-looking camera system equips itself with five separate cameras which enables acquiring one vertical image and four oblique images at the same time. This provides diverse information about the site compared to aerial photographs vertically. However, multi-looking Aerial Camera for building a 3D spatial information don't use a large-size CCD camera, do uses a medium-size CCD camera, if acquiring forward, backward, left and right imagery of Certain objects, Aerial photographing set overlap and sidelap must be considered. Especially, Sideward-looking camera set up by the sidelap to determine whether a particular object can be acquisition Through our research we analyzed of sideward footprint and aerial photographing efficiency of Multi-view imagery by sidelap changing.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.4
• /
• pp.367-378
• /
• 2007

We present a software which we developed for the multi-purpose CCD camera. This software can be used on the all 3 types of CCD - KAF-0401E ($768{\times}512$), KAF-1602E ($1536{\times}1024$), KAF-3200E ($2184{\times}1472$) made in KODAK Co.. For the efficient CCD camera control, the software is operated with two independent processes of the CCD control program and the temperature/shutter operation program. This software is designed to fully automatic operation as well as manually operation under LINUX system, and is controled by LINUX user signal procedure. We plan to use this software for all sky survey system and also night sky monitoring and sky observation. As our results, the read-out time of each CCD are about 15sec, 64sec, 134sec for KAF-0401E, KAF-1602E, KAF-3200E., because these time are limited by the data transmission speed of parallel port. For larger format CCD, the data transmission is required more high speed. we are considering this control software to one using USB port for high speed data transmission.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.4
• /
• pp.349-366
• /
• 2007

We designed and developed a multi-purpose CCD camera system for three kinds of CCDs; KAF-0401E($768{\times}512$), KAF-1602E($1536{\times}1024$), KAF-3200E($2184{\times}1472$) made by KODAK Co.. The system supports fast USB port as well as parallel port for data I/O and control signal. The packing is based on two stage circuit boards for size reduction and contains built-in filter wheel. Basic hardware components include clock pattern circuit, A/D conversion circuit, CCD data flow control circuit, and CCD temperature control unit. The CCD temperature can be controlled with accuracy of approximately $0.4^{\circ}C$ in the max. range of temperature, ${\Delta}33^{\circ}C$. This CCD camera system has with readout noise $6\;e^-$, and system gain $5\;e^-/ADU$. A total of 10 CCD camera systems were produced and our tests show that all of them show passable performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.268-271
• /
• 2003

The Volumetric Interferometer using two spherical wavefronts emitted from the ends of two single mode fibers has been suggested to measure 3-dimensional absolute coordinates. In this paper, we try to improve the performance of the volumetric interferometer using multi-CCDs. We get coordinates matching matrixes between CCDs and can obtain more information in the space with multi-CCDs. Also we find out the best arrangement of multi-CCDs by computer simulations. In the simulation we can know that it will be better to increase the distance between CCDs to improve performance. For the performance test, we do a repeatability test, a comparison test with 2-D stage and the self-calibration using artifact.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.10a
• /
• pp.323-324
• /
• 2009

In this paper, we use multi-point sources to illuminate the sample in digital holographic microscopy. The resolution of digital holographic microscopy is enhanced without shifting the CCD camera. The specimen is illuminated from many directions by using multi-point sources which are easily created by a lens-array. The high frequency information of specimen can be captured at a fixed position of CCD camera. All information is then synthesized to increase the resolution.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.91-94
• /
• 2009

The Aerial photographic mission is working of taking picture at appropriate point at operating aircraft. Specially, because multi-looking camera system for 3D spatial data construction don't use large size CCD camera, do use middle size or small size CCD camera, Exterior parameter can't be calculated because of not enough overlap, if taking picture at inappropriate position. Therefore, we can construct 3D spatial modeling data by taking picture at planned points using GPS Positioning information

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.856-860
• /
• 2006

A CCD camera is used to determine the position of the point sources that influence the measurement accuracy in the absolute interferometer. The principle of determination method is based on the GPS in which the position is determined by more than 3 distance information from the known positions. Two-dimensional array of photo-detectors in the CCD camera is used as known positions. Performing optimization of the cost function constructed with phase values measured at each pixel on the CCD camera, the position coordinates of each source is precisely determined.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.82-82
• /
• 2000

The way which estimates a position from Navigation is Dead-reckoning Navigation and Radio Navigation. Generally dead-reckoning navigation uses Gyro and odometer as sensor, but these have problems which are an integrating noise and a noise-sensitivity. Gps which is used by radio-navigation has a Troposthetic error and MultiPath ewer and so on. For minimizing a Troposthetic error and a Multipath error, this paper suggests to an algorithm which use vanishing point on CCD camera.