• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.404-411
• /
• 2010

The present paper deals with the continuous work of extending multi-dimensional limiting process (MLP), which has been quite successfully proposed on two- and three-dimensional structured grids, onto the unstructured grids. The basic idea of the present limiting strategy is to control the distribution of both cell-centered and cell-vertex physical properties to mimic a multi-dimensional nature of flow physics, which can be formulated as so called the MLP condition. The MLP condition can guarantee a high-order spatial accuracy without yielding spurious oscillations. Recently, MLP slope limiter was proposed based on the MUSCL-type reconstruction in two-dimensional case and it can be readily extended to three-dimensional case. Through various numerical analyses and extensive computations, it is observed that the proposed limiters are quite effective in controlling numerical oscillations and very accurate in capturing both discontinuous and continuous multi-dimensional flow features on 3-D tetrahedral grids.

• The Journal of Korean Association of Computer Education
• /
• v.8 no.4
• /
• pp.97-105
• /
• 2005

In this study, the undeniable digital multi-signature scheme based on the discrete logarithms is proposed. The proposed multi-signature scheme satisfies undeniability and is secure against active attacks such as fabrication and denial of multi-signature by signers. It is suitable for electronic election scheme in which several administrators are required. Especially in case of dispute among voters and administrators, the proposed scheme can resolve it due to the undeniable property. It can provide fair electronic election by minimizing the role of voting center, and can enable user-oriented electronic election.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.112-119
• /
• 2003

Generally, PID controller is not suitable to control multi variable system because it is very difficult to tune the PID gains. However, this paper shows that it is not hard to tune the PID gains if we can find a Jacobian matrix of the system. The Jacobian matrix expresses the ratio of output variations according to input variations. It is possible to adjust the input values in order to reduce the output error using the Jacobian. When the colt function is composed of error related terms, the gradient approach can tune the PID gains to minimize the function. In simulation, a hydrofoil catamaran with two inputs and two outputs is applied as a multi variable system. We can easily get the multi variable PID controller by the proposed teaming method. When the controller is compared with LQR controller, the performance is as good as that of LQR controller with a modeling equation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.4
• /
• pp.1027-1037
• /
• 1996

This paper presents an impulse response of the multi-path channel using KS-GCR(Korean Standard Ghost Cancel Reference) signal. Using the property of the KS-GCRsignal, we can get the impulse response of the multi-path channel from circular cross correlation of the received DS-GCR signal and the orginal KS-GCR ternary sequence. Therefore impulse response of the multi-path channel can be used to design the the ghost cancellation filter if it is designed to have inverse characteristics of multi-path channel. This paper shows that the ghost occurred from the multi-path channel can be cancelled by using the impulse response and preceding ghost cancellation algorithm.

• Journal of Information Processing Systems
• /
• v.17 no.2
• /
• pp.227-241
• /
• 2021

Object detection techniques based on deep learning such as YOLO have high detection performance and precision in a single channel video stream. In order to expand to multiple channel object detection in real-time, however, high-performance hardware is required. In this paper, we propose a novel back-end server framework, a real-time AI vision platform (RAVIP), which can extend the object detection function from single channel to simultaneous multi-channels, which can work well even in low-end server hardware. RAVIP assembles appropriate component modules from the RODEM (real-time object detection module) Base to create per-channel instances for each channel, enabling efficient parallelization of object detection instances on limited hardware resources through continuous monitoring with respect to resource utilization. Through practical experiments, RAVIP shows that it is possible to optimize CPU, GPU, and memory utilization while performing object detection service in a multi-channel situation. In addition, it has been proven that RAVIP can provide object detection services with 25 FPS for all 16 channels at the same time.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.1
• /
• pp.82-90
• /
• 2007

We introduce the concept of a remote distributed embedded system to integrated fieldbus based control systems in internet/Intranet. As a result, fieldbus systems are opened up for remote monitoring, remote maintenance, and remote control applications using state of the art Web-technology. This paper addresses the design of a remote distributed embedded system using Internet and CAN for multi-induction motor of Building and Industrial field. The fieldbus used the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. To build a remote distributed embedded system, the TCP/IP-CAN Gateway which converts a CAN protocol to TCP/IP protocol and vice verse, was designed. A experimental simulation system consists of a TCP/IP-CAN gateway in remote place and a command PC to be connected to Ethernet.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.1
• /
• pp.20-27
• /
• 2003

In this study, we designed and made Ultrasonic motor-digital multi controller(USM-DMC) using FPGA chip, A54SX72A made in Actel Corporation. By the minute, USM-DMC can adjust the frequency, duty ratio, and phase difference parameters of USM by digital input to be each 11bit from PC. Therefore, when we use this controller, it is possible to apply typical three parameters individually as well as multi-parameters simultaneously to control the speed and the torque. What is more, the strongest point is that it can trace frequency based on optimized frequency as compared with the phase difference because we can input optimized resonant frequency while in motoring. And we test the speed of USM with the adjustment of multi-parameters, the phase difference-frequency. As the result of the test, in the case of the multi-parameters of the phase difference and frequency, the speed characteristic is more linear and stable, and wider in the range of control than the single-parameter of the phase difference or the frequency.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.126-134
• /
• 2003

This paper investigates the multi-pass wet wire drawing process considering the slip between the wire and the capstan. The production of fine wire through multi-pass wet wire drawing process would be impossible without backtension. The backtension is affected by many process parameters, such as slip, dies reduction, coiling number of wire at the capstan, machine reduction, characteristic of lubricant etc. Up to date, die design and dies pass schedule of multi-pass wet wire drawing process have been performed by trial and error of expert in the industrial field. In this study, an analysis program which can perform the analysis and considering the effect of slip at each capstan was developed. The effects of many important parameters (drawing force, backtension force, needed power, slip rate, slip velocity rate etc.) on multi-pass wet wire drawing process can be predicted by this developed program. It is possible to obtain the important basic data which can be used in the pass schedule of multi-pass wet wire drawing process by using this developed program.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.92-99
• /
• 2024

To minimize the cumulative radiation dose, various path-finding approaches for single agent have been proposed. However, for emergence situations such as nuclear power plant accident, these methods cannot be effectively utilized for evacuating a large number of workers because no multi-agent method is valid to conduct the mission. In this study, a novel algorithm for solving the multi-agent path-finding problem is proposed using the conflict-based search approach and the objective function redefined in terms of the cumulative radiation dose. The proposed method can find multi paths that all agents arrive at the destinations with reducing the overall radiation dose. To verify the proposed method, three problems were defined. In the single-agent problem, the objective function proposed in this study reduces the cumulative dose by 82% compared with that of the shortest distance algorithm in experiment environment of this study. It was also verified in the two multi-agent problems that multi paths with minimized the overall radiation dose, in which all agents can reach the destination without collision, can be found. The method proposed in this study will contribute to establishing evacuation plans for improving the safety of workers in radiation-related facilities.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.811-829
• /
• 2015

One-way authenticated key agreement protocols, aiming at solving the problems to establish secure communications over public insecure networks, can achieve one-way authentication of communicating entities for giving a specific user strong anonymity and confidentiality of transmitted data. Public Key Infrastructure can design one-way authenticated key agreement protocols, but it will consume a large amount of computation. Because one-way authenticated key agreement protocols mainly concern on authentication and key agreement, we adopt multi-server architecture to realize these goals. About multi-server architecture, which allow the user to register at the registration center (RC) once and can access all the permitted services provided by the eligible servers. The combination of above-mentioned ideas can lead to a high-practical scheme in the universal client/server architecture. Based on these motivations, the paper firstly proposed a new one-way authenticated key agreement scheme based on multi-server architecture. Compared with the related literatures recently, our proposed scheme can not only own high efficiency and unique functionality, but is also robust to various attacks and achieves perfect forward secrecy. Finally, we give the security proof and the efficiency analysis of our proposed scheme.