• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.185-190
• /
• 2011

The important use of the desuperheater(multi spray type) changes the superheated steam into the saturated steam. It is more efficient and suitable for using the process. Also, it is more convenient and stable regarding the process temperature control. In this study, transient and quasi-static analysis were done for the evaluation of structural integrity of the multi spray type desuperheater of the power plant. Computational analysis was used to calculate the thermal stress, and the vibration test was done to evaluate the structural stability. This paper is verified by analysis that water spray nozzle(${\phi}=28mm$) shows the best ability. The results show that structural stability of the desuperheater under the real operating condition was proven.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.74-79
• /
• 2009

The generation of electric power and plant facilities have been attempting to improve energy efficiency with many efforts as those being basis of our country's economy. In particular, the CHP(Combined Heat Power plant) system, is producing the electricity and process steam, has generally been using for the cogeneration plants. When CHP system operates, the steam has to maintain the high temperature and high pressure in order to have high efficiency of electric power production as much as possible. In addition, the exhausted steam from the turbine has to reform proper temperature to use the needed process. The major purpose of desuperheater is that the superheated steam changes into the saturated steam because it is more efficient and suitable for using the process, furthermore, it is more convenient and stable regarding the process temperature control. The design of the desuperheater obtained through the experiment and preceding analysis. This paper is verified by analysis that water spray nozzle(${\Phi}$=28mm) shows the best ability under the real power plant condition.

• 한국화재소방학회논문지
• /
• 제33권6호
• /
• pp.1-8
• /
• 2019

본 연구에서는 물 분무 액적 특성 변화가 화재 진압에 미치는 영향을 FDS 6.5.2를 이용하여 수치적으로 분석하였다. 물 분무 노즐의 소화계수, 액적 분포함수, 중간체적 직경 및 초당 액적 수 변화에 대한 화재진압 특성은 정규 열방출률 곡선의 감소율와 냉각시간의 측면에서 평가되었다. 소화계수가 증가하면 정규열방출률 곡선이 더 급격하게 감소하고, 중간체적입경 변화가 화재진압에 영향을 미치는 것을 확인하였다. 단일 액적분포에서 초당액적수의 증가에 따라 정규 열방출률 곡선은 더 완만하게 감소하였으며, 다중분포에서는 초당액적수가 작은 조건에서만 정규 열방출률 곡선이 급격하게 감소하는 것을 확인하였다.

• 한국응용곤충학회지
• /
• 제60권2호
• /
• pp.229-234
• /
• 2021

본 연구에서는 멀티콥터를 이용한 무인항공용 방제약제 살포시 사용하는 상용 노즐에 3가지 타입에 따른 살포양상과 피복도를 조사하였다. 처리구에 플루페녹수론·메타플루미존(flufenoxuron+metaflumizone) 액상수화제와 비펜트린(bifenthrin) 유제를 살포하고난 뒤, 살포 약제의 낙하입자를 감수지를 이용하여 측정하고 감수지의 피복도를 조사하였다. 낙하입자 분석결과 풍속의 차이에 따라 노즐별 낙하입자 균일도에 차이를 보였으며 제형별 차이는 없었다. 노즐별 분사량은 공식 제공정보와 실제 분사량에 차이를 보였다. 이 결과들은 무인항공기 이용 농업현장방제 및 약제등록시험 가이드라인 설정에 근거자료로 활용될 수 있을 것이다.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.725-736
• /
• 2016

There is a growing concern on the improvement of water distribution pipeline for multi-regional water supply system in Korea along with its aging infrastructure. Rehabilitation of large diameter pipeline is more efficient in cost and time compared to replacement with trenching. The procedure for rehabilitation are diagnosis, cleaning, spraying coating material, and final inspection. The internal state of pipeline was carefully diagnosed and got C grade, which required rehabilitation. We found that 17,274,787,000 Korean won could be saved after pipe surface coating because of increased C coefficient of Hazen-Williams equation. Optimal coating material was D polyurea. We also found optimal distance between spraying nozzle and pipe wall to be 70 - 80 cm, which were critical factors for coating quality. This study also illustrated the time for spray drying to be more than 30 min. These results could be used in the quality control process during rehabilitation of aged pipelines.

• 한국분무공학회지
• /
• 제15권2호
• /
• pp.83-93
• /
• 2010

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feedwater heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare degree of shell wall thinning mitigation rate to squared type with mitigation rate of other type baffle plate, four different types of impingement baffle plate-squared, curved, mitigating type and multi-hole type-applied inside the shell. With these comparison data, this paper describes operation of experiments and numerical analysis which is composed similar condition with real feed water heater. And flow visualization is operated for verification of experiments and numerical analysis. In conclusion, this study shows that mitigating type and multi-hole type baffle plate are more effective than other baffle plate about prevention of pressure concentration and pressure value decrease.