• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.2
• /
• pp.61-70
• /
• 2011

This study aims to establish the concept about a new approaching method dor remodeling in the planning step. also, this study sets up the way how to approach in a dimensional way by classifying the conceptual composition of the target housing as a method. The dimensional definition is as below. The one dimensional approach: the spot. the two dimensional approach: the line, the three dimensional approach: the apatial mass, the four dimensional approach: space + time, the n dimensional (multi-dimensional) approach: the space + time + emotion. The research findings are as follows : For the purpose of remodeling, the old housing should be viewed in the three dimensional shape and space. It is defined as multi-dimensional module method to design the shape and space of the target housing in a multi-dimensional point, considering the three dimensional space composition, the emotion of the user, the housing itself. and the time of the user.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.387-388
• /
• 2008

This paper presents the design approach and test results of the Q-band precision subminiature coaxial adaptor based on transmission line theory using multi-step impedance and air-holes to increase its cutoff frequency. In order to increase the frequency performance, the adaptor is designed with hooked structure, fixing step, multi-air-holes, and outer conductor. The return loss increments due to the hooked structure and multi air-holes are minimized to 2 dB and 1.5 dB, respectively. A VSWR(Voltage Standing Wave Ratio) of <1.2 is obtained from DC to 40 GHz, while guaranteeing the durability of the adaptor from room-temperature$(25^{\circ}C)$ to $120^{\circ}C$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.5
• /
• pp.373-380
• /
• 2009

The evaporation process of multi-component fuel is different from one of a single component, because the properties of each component affects among the components. In actual engine, the spatial distribution of fuel vapor concentration dominates auto-ignition and initial combustion, and depends on the volatility and diffusivity of each component fuel contained in the multi-component fuel. Then, this study proposes a simplified numerical scheme for analysis of evaporation process of multi-component fuel sprays. Evaporation process is calculated by KIVA-II code based on the simple two-phases region that is approximated by modified saturated liquid-vapor line, which was obtained by connecting the 50% distillation temperature for each component under several pressure fields. Consequently, it can be quantitatively simulated that vapor of low boiling fuel component mostly exists around nozzle and spray tip region, the high boiling duel component, on the other hand, mostly appears near the spray tip.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.59-60
• /
• 2015

High resolution, multi-wavelength images from the Dutch Open Telescope were used to study the detailed mechanisms that might be involved in the multiple layer solar atmosphere observed in high cadence multi-wavelength observations. With the exceptional data observed for active region NOAA 10789 on 2005 July 13th, we study the changing pattern of the fibril using multi-wavelength tomography of the $H{\alpha}$ line center and blue wing, Ca II H, and the G Band. It is believed that a long fibril that is rooted in the umbra, with longer apparent periodicity, may be due to morphological changes. To determine this, we conduct phase difference and coherency analysis between points along the fibril to understand how the wave propagates.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.640-643
• /
• 1999

This paper presents the results of multi-stress chamber experiments done to examine the tracking and erosion performance of polymer insulator. Multi-stress testing is able to demonstrate deficiencies of polymer insulator materials and designs, including the nature of interfaces in insulation design. Therefore, multi-stress testing is believed to a suitable test for evaluating the aging performance of polymer insulator designs. We have nvestigated IEC 61109 Annex C for estimating long time performance of polymer insulator.

• Industrial Engineering and Management Systems
• /
• v.12 no.4
• /
• pp.330-335
• /
• 2013

A surface mount device (SMD) assembles electronic components on printed circuit boards (PCB). Since a component assembly process is a bottleneck process in a PCB assembly line, making an efficient SMD plan is critical in increasing the PCB assembly line productivity. Feeder assignment is an important part of the SMD plan optimization. In this paper, we propose a feeder re-assign improvement algorithm for a specific type of SMD machine with a piano type multi-head gantry. Computational results on some real-world benchmark data sets show the effectiveness of our proposed algorithm.

• Proceedings of the IEEK Conference
• /
• 2002.07a
• /
• pp.149-151
• /
• 2002

We had been developing the variety of parallel processing systems in order to improve the processing speed of visual media applications. These systems were using multi-access memory system(MAMS) as a parallel memory system, which provides the capability of the simultaneous accesses of image points in a line-segment with an arbitrary degree, which is required in many low-level image processing operations such as edge or line detection in a particular direction, and so on. But, the performance of these systems did not give a faithful speed because of asynchronous feature between MAMS and processing elements. To improve the processing speed of these systems, we have been investigated a pipelined parallel processing system using MAMS. Although the system is considered as being the single instruction multiple data(SIMD) type like the early developed systems, the performance of the system yielded about 2.5 times faster speed.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.718-722
• /
• 2001

This paper proposes an SSSC based on multi-bridge inverters in PWM scheme. The proposed system consists of 6 H-bridge inverter modules per phase. The dynamic characteristic of proposed system was analyzed by simulation with EMTP codes, assuming that the SSSC is inserted in the 154-kV transmission line of one-machine-infinite-bus power system. The feasibility of hardware implementation was verified through experimental works with a scaled-model. The proposed system can be directly inserted in the transmission line without coupling transformers, and has flexibility in expanding the operation voltage by increasing the number of H-bridges.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.443-451
• /
• 2015

The stability of a multi-terminal direct current (MTDC) system is often influenced by its control strategy. To improve the stability of the MTDC system, the control strategy of the MTDC system must be appropriately adopted. This paper deals with estimating stability of a MTDC system based on the line-commutated converter based high voltage direct current (LCC HVDC) system with an inverter with constant extinction angle (CEA) control or a rectifier with constant ignition angle (CIA) control. In order to evaluate effects of two control strategies on stability, a MTDC system is tested on two conditions: initialization and changing DC power transfer. In order to compare the stability effects of the MTDC system according to each control strategy, a mathematical MTDC model is analyzed in frequency domain and time domain. In addition, Bode stability criterion and transient response are carried out to estimate its stability.

• Proceedings of the KIEE Conference
• /
• 2008.04b
• /
• pp.96-99
• /
• 2008

On-line condition monitoring is a useful tool for maintaining and extending the longevity of power transformers. An intelligent diagnostic system is desirable for operational safety and reliability. Bringing these concepts together results in a powerful support tool for engineers, reducing the volume of data to deal with, and making the data more meaningful. This paper describes how a multi-agent system for diagnosing the cause of transformer partial discharge activity was coupled with a method of UHF partial discharge monitoring, creating an on-line condition monitoring system. The challenges presented by the on-site environment are discussed, along with the implications for the complete system.