• Korean Journal of Optics and Photonics
• /
• v.20 no.6
• /
• pp.354-360
• /
• 2009

We have constructed and analyzed the performance of a simple fiber bundle multi-focal microscope. The microscope had a fiber bundle substituted for micro-lens array that is the core part of MMM(multi-focal multi-photon microscope). The MMM is a type of confocal microscope. To analyze the performance and characteristics of the fiber bundle multi-focal microscope, three types of samples were used: a standard grating, USAF 1951(7, 3), and 1951(7, 6). Using two polarizers and a polarizing beam splitter, we eliminated noise and got clear images. We obtained the FWHM of fiber spot images with the standard grating using two different magnifier lenses which were 63X and 20X, and found an image of the sample as a distribution of fiber spot images. For this case we used the low magnification lens, which gives denser distribution, so that we could get clearer images. In order to test the resolution of the fiber bundle multi-focal microscopic system, we used the USAF 1951 sample which has a smaller line interval than that of the standard grating. The FWHM of the line width of the image coincides well with the real line width of the USAF 1951 sample. We confirmed the performance of a fiber bundle multi-focal microscopic system which is relatively simple but has submicron resolution and is able to get 1600 images at the same time.

• Journal of Plant Biotechnology
• /
• v.50
• /
• pp.82-88
• /
• 2023

Shoot-tip culture was used to produce clonal plants of radish stock seeds. Using 6-benzyladenine (BA), the largest number of RA2 line multi-shoots were formed with an average of 14.67 shoots on 1.33 µM BA in early seedlings and 11.33 shoots on 1.78 µM BA in juvenile seedlings. The largest number of RA4 line multi-shoots were formed with an average of 11.67 shoots on 2.22 µM BA in early seedlings and 13.67 shoots on 1.33 µM BA in juvenile seedlings. There was little difference in the significance level by BA concentration in both lines. Using Thidiazuron (TDZ), the number of RA2 line multi-shoots increased with increasing TDZ concentration, forming the largest number of multi-shoots in 0.45 µM TDZ (7.0 and 3.0 multi-shoots for early and juvenile seedlings, respectively), but few multi-shoots were formed from TDZ 2.25 and 4.5 µM. RA4 line produced almost no multi-shoots in early seedlings, and 3.7 multi-shoots were produced in 0.23 and 0.45 µM TDZ in juvenile seedlings, but not at higher concentrations. Analysis of the tissue culture seedlings grown by cultivating the generated multi-shoots with Radish Foundation seeds using SSR marker revealed a weak pattern of mutation in the generated tissue culture seedlings, but there was no mutant. In addition, in terms of root roots, both RA2 and RA4 lines generally had the best rooting, number of roots, and degree of root development in 4.9 µM indol-3- butyric acid (IBA).

• Korean Journal of Breeding Science
• /
• v.41 no.1
• /
• pp.1-8
• /
• 2009

This study was carried out to breed and develop high quality and functional nutrient tomato with multi disease resistance as well as a stable growing adaptation for fresh market usage under protected plastic houses cultivation. The materials were used 5 inbred lines and their 6 hybrids of large tomato group, which have been bred and developed from 1999 to 2007 in Division of Plant Resource Department of Chungnam National University. Fruit weight showed hybrid vigor effect that $F_1$ hybrids weighed more than their parent lines, fruit shape formed three type of oblate, deep oblate and globe shape, in firmness and pericarp thickness have got a high significant correlation, inbred DN611 line was measured the most firm fruit with 6.04 mm pericarp thickness. In fruit color at maturity, pink color crossed to red color appeared all red fruit color in the $F_1$ hybrids, it means red skin color is a dominant gene compared to pink skin color is a recessive gene in tomato, while between fruit skin color and shoulder part color showed no any co-relationship. The sugar content and titratable acid of $F_1$ hybrids inherited an intermediate data of their parent lines, the flavor of KP543 inbred line and the hybrid (JB535 x KP543) revealed the better taste with high brix and proper titratable acid content$^{*}$. In beta carotene content DN611 line showed 2~3 times higher than other materials so that its 3 hybrids contained an increased level of beta carotene, lycopene content was not so much difference among inbred lines and $F_1$ hybrids, of them MD508 contained higher of 8.72 mg and hybrid (JB535 x JA517) had 8.05 mg lycopene content per 100 g fruit, overall pink skin color and red skin color measured a higher lycopene content than yellow and orange skin color at ripe stage. In disease resistance test by PCR marker for Fusarium race2 (I2), Nematode (Mi1), ToMV ($Tm2^2$), Cladosporium (Cf9), (JB535 x JA517) hybrid have got multi-resistance with homozygote band in Nematode, ToMV, Cladosporium and heterozygote band in Fusarium race2. Through this breeding program we could select high quality and functional nutrient with multi resistant $F_1$ hybrids and inbred lines in tomato which are two best hybrids (JB535 x MD508), (JB535 x JA517), additionally developed high beta carotene inbred line DN611 and increased the level of lycopene inbred line MD508. These results will be very useful to make a high quality tomato variety continuously.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.330-336
• /
• 2009

This paper proposes an on-line voltage management and control solution for a distribution system which can improve the efficiency and accuracy of existing off-line work by collecting customer voltage on-line as well as the voltage compensation capability of the existing ULTC (Under Load Tap Changer) operation and control strategy by controlling the ULTC tap based on pattern clustering and recognition. The proposed solution consists of an ADVMD (Advanced Digital Voltage Management Device), a VMS (Voltage Management Solution) and an OLDUC (On-Line Digital ULTC Controller). An on-line voltage management emulator based on multi-thread programming and the shared memory method is developed to emulate on-line voltage management and digital ULTC control methodology based on the on-line collection of the customer's voltage. In addition, using this emulator, the effectiveness of the proposed pattern clustering and recognition based ULTC control strategy is proven for the worst voltage environments for three days.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.43-44
• /
• 2012

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.541-556
• /
• 2005

The memory access latency of the system has been a primary factor of performance degradation in single-processor system and multi-processor system. The remote memory access latency takes a lot of overhead over the local memory access latency especially in the distributed shared-memory system. To resolve this problem, the multi-level cache architecture that contains a remote cache in the multi-processor system has been proposed. In this paper, we propose a new cache replacement policy that improves the performance of the multi-processor system with the remote cache. If the multi-level cache keeps the multi-level inclusion(MLI) property and uses the LRU(Least Recently Used) cache replacement policy, the LRU information of the higher-level cache(a processor cache) would be different with that of the lower-level cache(a remote cache). In this situation, the replacement of a remote cache line can induce the exchange of a processor cache line that is used by the processor. It is a main factor of performance degradation in a whole system. To alleviate this disadvantage of the LRU replacement polity, the new policy analyses tht processor's remote memory access pattern of each node and uses this information to reduce the number of invalidations of the useful cache line in the higher-level cache. The new replacement policy of the remote cache can improve the performance by $3.5\%$ in maximum and $2.5\%$ in average on SPLASH-2 benchmarks, compared to the general LRU cache replacement policy.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.1
• /
• pp.54-61
• /
• 2003

This paper shows the results of emissive electromagnetic field characteristics on medium voltage power line(22.9 kV). The measurements were taken when communications signals were coupled into the 22.9 kV main wire of medium voltage power-line in a frequency range of 9 kHz to 30 MHz. The results of the measurement are as follows-emissive electromagnetic Held characteristics from multi carrier signals were superior to a single carrier signal. And we confirmed the PLC transmission distance was 1.8 km when multi-carrier transmission power was 20 dBm. Electric field strength was under the 40 dBuV/m at 30 MHz when 10 m method was measured.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.6
• /
• pp.1255-1260
• /
• 2011

In this paper, we study on the reliability of Very High-rate Power Line Communication (VH-PLC) for Smart Grid, so that the resultant data rate is over 400Mbps at a physical layer. Firstly, reviewing the research trend of the PLC, we discuss the required techniques for supporting the Smart Grid. Considering a pre-specification with the value of several parameters, we investigate a multi-carrier modulation technique to overcome limitations of higher rate transmission under power line channel environments. Then, we propose a system specification of the VH-PLC in the sense of enhancing two features. One is resolving the problem of the co-existence of the deployed high-speed PLC according to the published standardization of KS X 4600-1 in Korea. The other is getting better performance on the grid adopting the diverse element techniques, such as multi-carrier modulation, a subcarrier utilization mode, a variable rate LDPC (Low Density Parity Check) code, and a time and frequency diversity technique. Further, a simulation tool, composed of an Event-Driven simulator and a Time-Driven simulator, is developed for the purpose of verifying the system performance and continuously cross-checking the test bench signal of the proposed VH-PLC system.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.2049-2057
• /
• 2014

In this paper, a numerical method for analyzing coupling between high-altitude electromagnetic pulse (HEMP) as external field and a shielded twisted pair (STP) cable is proposed, which is based on an expanded chain matrix. Load responses of electromagnetic (EM) field excitation in uniform transmission line (TL) are solved by Baum-Liu-Tesche (BLT) equations in frequency domain, however, it is difficult to apply BLT equations to solve load responses of STP cable because the iteratively changing configuration of each twisted pairs are involved in cable. To avoid this problem and decrease memory and CPU time, we proposed the expanded chain matrix modeling method that is calculated using ABCD parameters, and applied multi-conductor transmission line (MTL) theory to consider the EMP coupling effectiveness of each twisted pairs. The results implemented by the proposed method are presented and compared with those obtained by the finite-difference time domain (FDTD) method as a kind of 3D full wave analysis.

• The Journal of Information Technology
• /
• v.6 no.4
• /
• pp.1-9
• /
• 2003

This paper is about power line communication(PLC) over the low power voltage grid. The main advantage with power line communication is the use of an existing infrastructure. The PLC channel can be modeled as having multi-path propagation with frequency-selective fading, typical power lines exhibit signal attenuation increasing with length and frequency. OFDM(Orthogonal Frequency Division Multiplexing) is a modulation technique where multiple low data rate carriers are combined by a transmitter to form a composite high data rate transmission. The performance in consideration of the multi-path(echoes) powerline scheme is analyzed and verified by computer simulation.