• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.25 no.3
• /
• pp.95-99
• /
• 2019

In the modified atmosphere packaging of powdered infant formula, the oxygen inside the package may cause its quality deterioration and needs to be minimized for quality preservation. A way of oxygen scavenger inclusion in the single-serve package without contacting the product was devised for removing oxygen residing initially and permeating through the seal layer during the storage. A polyethylene/pulp multi-layer porous filter bag of 5 × 7 cm containing 13 g of powdered infant formula was packaged in an 8 × 9 cm size aluminium laminated film package with a Fe-based oxygen scavenger of 1.8 g. After nitrogen flushed packaging, the active packages were stored at 30℃ for 254 days with periodical quality measurement. The active package could remove the initial residual oxygen of 1.4% completely and maintain absence of oxygen for the whole storage, which contributed to reduced oxidation observed in lower product peroxide value compared to that of the product in the control package. There was no influence of packaging treatment on content of 5-hydroxymethylfurfural, reaction product of initial nonenzymatic browning. The devised oxygen-scavenging single-serve package showed a potential to improve the preservation of infant formula powder and extend the shelf life.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.4
• /
• pp.595-604
• /
• 2006

The growth characteristics of Commercially Developed Nitrifying Bacteria (CDNB) were studied in laboratoryscale. CDNB, a pure, artificially isolated bacterium, was cultivated to produce Cultivated Nitrifying Bacterium Group (CNBG). The average ammonia removal rate of CDNB was 0.0234g $NH_4^+-N/g$ MLSS/hr. CNBG was produced in the batch reactor and Specific Nitrification Rate (SNR) was determined at 0.0107g $NH_4^+-N/g$ MLSS/hr. The SNR of CNBG was lower than the SNR of CDNB because the diverse and multi-cultured microbial growth took place during cultivation. The effect of the temperatures and the mixing ratios of sewage and culture solution on the SNR of CNBG was studied. The SNR of CNBG, 0.0107g $NH_4^+-N/g$ MLSS/hr at $27^{\circ}C$, decreased to 0.0048g $NH_4^+-N/g$ MLSS/hr at $15^{\circ}C$, and temperature coefficient (${\Theta}$) was calculated to be 1.07. With the varied sewage mixing ratios, the SNR of CNBG remained unchanged. Activated sludge reactors maintaining an MLSS of 2,000mg/L at HRT of 4 h were operated under conditions in which dosage of Concentrated CNBG Solution (CCNBGS, 10,000mg MLSS/L) and application method of CNBG were varied. The reactor with 20mL of CCNBGS took shorter time to oxidize $NH_4^+-N$ reaching 1mg/L than the reactor with 5mL of CCNBGS showing that higher dosages were associated with greater mass removal of $NH_4^+-N$. However, the total removal was not great. In terms of different methods of CNBG application, reactor seeded with 20mL of CCNBGS took 3days to reach 1mg/L of effluent ammonia concentration while reactor dosed with 20% (v/v) CNBG implanted media took 2days. Both the control reactor and the reactor dosed with 20% (v/v) media only did not reach 1mg $NH_4^+-N/L$ after operating 18days. The reactor with CNBG implanted media had the highest $NH_4^+-N$ removal rate because of maintaining high concentration of Nitrifying Oxidizing Bacteria (NOM), and is regarded as an appropriate method for the activated sludge process.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.101-112
• /
• 2005

As we perceive the world as 3-dimensional through our two eyes, we can extract 3-dimensional information from stereo images obtained from two or more cameras. Since stereo images have a large amount of data, with recent advances in digital video coding technology, efficient compression algorithms have been developed for stereo images. In order to compress stereo images and to obtain 3-D information such as depth, we find disparity vectors by using disparity estimation algorithm generally utilizing pixel differences between stereo pairs. However, it is not unusual to have stereo images having different intensity values for several reasons, such as incorrect control of the iris of each camera, disagreement of the foci of two cameras, orientation, position, and different characteristics of CCD (charge-coupled device) cameras, and so on. The intensity differences of stereo pairs often cause undesirable problems such as incorrect disparity vectors and consequent low coding efficiency. By compensating intensity differences between left and right images, we can obtain higher coding efficiency and hopefully reduce the perceptual burden of brain to combine different information incoming from two eyes. We propose several methods of intensity compensation such as local intensity compensation, global intensity compensation, and hierarchical intensity compensation as very simple and efficient preprocessing tool. Experimental results show that the proposed algerian provides significant improvement in coding efficiency.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.74-84
• /
• 2007

This paper presents a new dual-loop Delay Locked Loop(DLL) to expand the delay lock range of a conventional DLL. The proposed dual-loop DLL contains a Coarse_loop and a Fine_loop, and its operation utilizes one of the loops selected by comparing the initial time-difference among the reference clock and 2 internal clocks. The 2 internal clock signals are taken, respectively, at the midpoint and endpoint of a VCDL and thus are $180^{\circ}$ separated in phase. When the proposed DLL is out of the conventional lock range, the Coarse_loop is selected to push the DLL in the conventional lock range and then the Fine_loop is used to complete the locking process. Therefore, the proposed DLL is always stably locked in unless it is harmonically false-locked. Since the VCDL employed in the proposed DLL needs two control voltages to adjust the delay time, it uses TG-based inverters, instead of conventional, multi-stacked, current-starved inverters, to compose the delay line. The new VCDL provides a wider delay range than a conventional VCDL In overall, the proposed DLL demonstrates a more than 2 times wider lock range than a conventional DLL. The proposed DLL circuits have been designed, simulated and proved using 0.18um, 1.8V TSMC CMOS library and its operation frequency range is 100MHz${\sim}$1GHz. Finally, the maximum phase error of the DLL locked in at 1GHz is less than 11.2ps showing a high resolution and the simulated power consumption is 11.5mW.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.82-92
• /
• 2008

Recently, many digital signal processing(DSP) applications such as H.264, CDMA and MP3 are predominant tasks for modern high-performance portable devices. These applications are generally computation-intensive, and therefore, require quite complicated accelerator units to improve performance. Designing such specialized, yet fixed DSP accelerators takes lots of effort. Therefore, DSPs with multiple accelerators often have a very poor time-to-market and an unacceptable area overhead. To avoid such long time-to-market and high-area overhead, dynamically reconfigurable DSP architectures have attracted a lot of attention lately. Dynamically reconfigurable DSPs typically employ a multi-functional DSP accelerator which executes similar, yet different multiple kinds of computations for DSP applications. With this type of dynamically reconfigurable DSP accelerators, the time to market reduces significantly. However, integrating multiple functionalities into a single IP often results in excessive control and area overhead. Therefore, delay and power consumption often turn out to be quite excessive. In this thesis, to reduce power consumption of dynamically reconfigurable IPs, we propose a novel fine-grained clock gating scheme, and to reduce size of dynamically reconfigurable IPs, we propose a compact multiplier-less multiplication unit where shifters and adders carry out constant multiplications.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.10
• /
• pp.45-52
• /
• 2008

We investigated the design of an RF-powered, wireless temperature sensor tag chip using $0.18-{\mu}m$ CMOS technology. The transponder generates its own power supply from small incident RF signal using Schottky diodes in voltage multiplier. Ambient temperature is measured using a new low-power temperature-to-voltage converter, and an 8-bit single-slope ADC converts the measured voltage to digital data. ASK demodulator and digital control are combined to identify unique transponder (ID) sent by base station for multi-transponder applications. The measurement of the temperature sensor tag chip showed a resolution of $0.64^{\circ}C/LSB$ in the range from $20^{\circ}C$ to $100^{\circ}C$, which is suitable for environmental temperature monitoring. The chip size is $1.1{\times}0.34mm^2$, and operates at clock frequency of 100 kHz while consuming $64{\mu}W$ power. The temperature sensor required a -11 dBm RF input power, supported a conversion rate of 12.5 k-samples/sec, and a maximum error of $0.5^{\circ}C$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.107-115
• /
• 2013

Smart appliances with multi-media and telecommunication equipments provide users complicated convenience functions. On the contrary, 8-bit controller-based low performance electronics still cannot afford such multimedia and telecommunication. If we find a way to have low-end electronics connected and provide complicated functions, they can be also made "smart". Fortunately, 8-bit controllers used in low-end appliances have UART, which can be connected to any of BlueTooth, Wi-Fi and ZigBee communication modules which can, in turn, communicate with smart devices. Any communication module can be attached to the low-end electronics due to the variety of smart devices' connectivity at the other side. Although the convenience functions seem complicated, they are actually macros in a script form composed of micro commands which implement the base functions of appliances. Since the kinds of the base functions are not that many, the low-end electronic appliances will become "smart" if their control program can be extended to execute sequentially the micro commands in any combination. Such simple innovation has not seen the world, until now due to the overhead of the additionally required hardware such as display devices and buttons. The high-quality display and touch screen functionalities of smart devices can replace the required hardware, and remove the overhead completely. In fact, the low-end appliances become smart as if an "evolution kit" is newly equipped.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.6
• /
• pp.741-755
• /
• 1999

As a material of metal-ceramic prosthesis, nickel as a form of Ni-Cr alloy has been used for many dental prostheses in many cases. However, several problems in use of the alloy have been revealed (ex : tissue stimulation, skin allergy, hypersensitivity, cytotoxicity and carcinogenecity). Little is known about nickel with respect to the relationship between Ni-prosthesis and gaining of Ni-resistance in oral microorganisms. The present study was undertaken to check wheather use of Ni-prosthesis leads to occurrence of Ni-resistant microorganisms. So this study may suggest the possible relationships between the oral microorganisms and nickel-resistance in oral environment. Bacteria were isolated from the gingival crevicular fluid on the pateints wearing Ni-Cr prosthesis. The isolated bacteria were tested for their Ni-resistance in nickel containing media at different concentration from 3mM to 110mM. E. coli HB101 was used as control. The Ni-resistant bacteria were isolated and biochemically identified. The Ni-resistant bacteria were tested several bio-chemical, molecular-biological tests. Performed tests were ; measuring the growth curve, antibiotic test, growth ability test in liquid media, isolation of the chromosome and plasmid, digestion of DNA by restriction enzyme, electrophoresis of chromosome and plasmid DNA, identification of Ni-resistant genes by the DNA hybridization. The results were as follows: 1) The bacteria isolated from gingival crevicular fluid on the patients wearing Ni-Cr alloy pros-thesis showed nickel-resistance. 2) The isolated microorganisms grew at nickel containing media of high concentrations (60mM-110mM). 3) Based on the biochemical tests, the isolated microorganisms were identified as Enterococcus faecalis(13 cases), Klebsiella pneumoniae(1 case) and Enterobacter gergeviae(1 case). 4) Enterococcus faecalis expressed not only nickel resistance but also the multi-drug resistance to several antibiotics ; chloramphenicol, kanamicin, streptomycin, lincomycin, clindamycin. However, all strain showed the sensitivity against the tetracycline. 5) DNA hybridization result suggest that there is no homology between the previousely known gene of nickel resistance in Klebsiella pneumoniae and chromosomal DNA of Enterococcus faecalis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.20
• /
• pp.9009-9013
• /
• 2014

Background: The aim of this study was to explore the efficacy and adverse reactions of CT-guided radioactive 125I-seed implantation treatment combined with chemotherapy for platinum-resistant recurrent ovarian carcinoma. Materials and Methods: From September 2010 to December 2012, 23 patients with platinum-resistant recurrent ovarian carcinoma were enrolled. All the patients refused, could not bear, or were not suitable for surgery. They all had no more than 3 lesions, which were detected and could also be measured by CT. All were clarified as single-lesion or multiple-lesion groups. A total of 41 lesions underwent implantation of from 8 to 106 125I seeds (median=43). Multi-plane implanting was adopted and 125I-seeds of (0.4-0.7)mCi were placed at intervals of (0.5-1.0) cm. After implantation treatment, all patients underwent 4 cycles of chemotherapy with gemcitabine $800mg/m^2$ (days 1, 8 and 15). Results: The outcome was evaluated with CT 3 weeks and every 3 months after implantation treatment. After 6 months, the volume of 32 out of 41 lesions (78.0%) was reduced at least 30%, within which 9 lesions completely disappeared(22.0%). Complete response was observed in 7 cases (30.4%), with a partial response in 4 cases (17.4%), 4 cases stable(17.4%)and 8 cases showing progression (34.8%). The total clinical remission rate was 47.8% (11/23). The clinical remission rate was 77.8% (7/9) in the single-lesion group and 28.6% (4/14) in the multiple-lesion group with a significant difference between the two(P=0.036). The common side effects observed were mild gastrointestinal reactions. Conclusions: 125I-seed implantation combined with chemotherapy applies an effective way in the treatment of platinum-resistant recurrent ovarian epithelial carcinoma with the advantages of high local control rates, good short-term effects, little trauma and less side effects.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.7
• /
• pp.3239-3245
• /
• 2014

Background: College students are recommended as the target groups for catch-up human papillomavirus (HPV) vaccination. Systematical exploration of awareness, acceptability, and decision-making factors of HPV vaccination among Chinese college students has been limited. Materials and Methods: A multi-center survey was conducted in mainland China between November 2011 and May 2012. College students aged 18-22 years were stratified by their grade, gender, and major for sampling. Socio-demographic and HPV-related information such as knowledge, perceptions, acceptability, and attitudes were collected through a questionnaire. Results: A total of 3,497 undergraduates completed the questionnaire, among which 1,686 were males. The acceptability of the HPV vaccine was high (70.8%). Undergraduates from high-level universities, at lower grade, or with greater prior knowledge of HPV vaccines showed higher acceptability of HPV vaccination ($p_{trend}$ <0.001). Additionally, undergraduates with vaccination experience outside the National Expanded Program on Immunization (OR=1.29; 95%CI: 1.10-1.51) or fear of HPV-related diseases (OR=2.79; 95%CI: 2.28-3.41) were more willing to accept HPV vaccination. General knowledge of HPV vaccine was low among undergraduates, and safety was a major concern (71.05%). The majority of students wished to pay less than 300RMB for HPV vaccine and chose the Chinese Center for Disease Control and Prevention as the most appropriate venue for vaccination. Conclusions: Although most undergraduates demonstrate positive attitudes towards HPV vaccination, challenges pertaining to introduction exist in China. Corresponding proactive education and governmental subsidy to do so are urgently needed by this age-group population. Suggestions and potential strategies indicated may help shape the future HPV vaccination program in China.