• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1388-1394
• /
• 2016

This paper presents a experimental study of two-phase flow boiling of FC-72 in multi channels. Flow boiling heat transfer coefficients are obtained with mass flux ranging from 152.9 to $353.9kg/m^2s$ and heat flux from 5.6 to $46.1kW/m^2$. The experimental results show that the heat transfer is governed by nucleate boiling mechanism in the low heat flux region. However, it is found that the effects of nucleate boiling and forced convection boiling are combined as the heat flux increases. A new correlation to predict the heat transfer coefficient is developed by using the dimensionless number such as Reynolds number, Weber number, boiling number. This correlation shows good predictive accuracy against the measured data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1A
• /
• pp.73-81
• /
• 2011

IEEE 802.11 PHY and MAC layer provide multiple channels and data rates. To improve the performance of IEEE 802.11 multi-radio ad hoc networks, it is required to utilize available channels and data rates efficiently. However, in IEEE 802.11 multi-rate networks, the rate anomaly (RA) problem occurs that the network performance is severely degraded as low-rate links affect high-rate links. Hence, in this paper, we propose a model-based rate separation (MRS) algorithm that uses multiple channels to separate different data rate links so that the RA problem is mitigated. MRS algorithm utilizes an existing throughput model that estimates the throughput of IEEE 802.11 single-hop networks to separate low-rate links and high-rate links. Through simulations, we demonstrate that the MRS algorithm shows improved network performance compared with existing algorithms in multi-radio ad hoc networks.

• Journal of the Korea Society for Simulation
• /
• v.18 no.1
• /
• pp.1-7
• /
• 2009

In this paper, we obtain the optimal number of interfaces/channels in wireless mesh networks by simulation. The simulation study is done in static multi-channel multi-interface environment. When many nodes use a single interface and channel and contend for the channel, collisions of RTS/CTS results in network performance degradation. To avoid such degradation and reduce interferences between the adjacent nodes, use of multi-interface/channel is considered. 802.11a and 802.11b systems offer 12 and 3 orthogonal channels respectively and multi-interface/channel scheme could be applied. But rare research about the optimal number of interfaces/channels has been studied. Therefore, in this paper, simulation study for the optimal number of interfaces/channels in wireless mesh network is made.

• Journal of Distribution Science
• /
• v.19 no.7
• /
• pp.75-85
• /
• 2021

Purpose: This study is focused on analyzing the key reasons why One-brand Shop has been shrinking and Multi-brand shop is rising from the perspective of the trend changes of customer behavior and distribution channel in the Korean cosmetic market. The purpose of this study is to examine the factors influencing the attractiveness of cosmetics distribution channels from a store perspective and a consumer perspective. Research methodology: This study conducted a survey to define the factors that influence the attractiveness of cosmetics distribution channels. A total of 300 samples were investigated. Results: The store factors that influence the attractiveness of the cosmetics distribution channel were product quality, shopping convenience, and store accessibility in the group of single-brand store preferences, and product diversity and store experience in the group of multi-brand store preferences. Conclusions: Core competing factors of One-brand shop include product value, shopping convenience and accessibility. In contrast, Multi-Brand shops offer core competing factors of diversified product portfolio and shop function experience. A new trend has been found that the customer segments of the price-oriented group and the pleasure-oriented group have become the mainstream segments in the Korean cosmetic market. In conclusion, Multi-brand Shops are suggesting better overall customer experiences in terms of distribution channel attractiveness and customer values.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.5
• /
• pp.1310-1317
• /
• 2015

Two-phase flow boiling heat transfer in micro-channels was experimently investigated. The test section consisted of 15 rectangular micro-channels with a depth of 0.45mm, width of 0.20mm. The experiments were performed for heat fluxes ranging from 5.6 to 46.1kW/m2 and mass fluxes from 150 to 450kg/m2s using FC-72 as the working fluid. According to the results, at the low heat flux region, heat transfer coefficient strongly depends on the heat flux, while heat transfer coefficient at the high heat flux region was independent on the heat flux. Four correlations were used to predict the heat transfer coefficient. The measured heat transfer coefficient was compared with four correlations. It was found that Kaew-On and Wongwises's correlation well predicted the measured data, within the MAE of 40.3%.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.11
• /
• pp.550-556
• /
• 2001

The computerized cardiac analysis system, which acquires and analyzes the electrical activation signal propagating along the surface of the heart, is indispensible equipment for the open heart surgery and electrical cardiac study. In this paper, the design requirement and the electrical circuit analysis are performed to construct the multi-channel cardiac activation pre-amplifier necessary for a signal conditioning circuit. The general 64 channel configuration is expanded into 128 channels to enhance the spatial resolution on the mapped surface of the heart. The 128 channels pre-amplifier consists of input circuit, differential amplifier, right leg driven circuit and isolation part. It has distinct features; high voltage protection, leakage current limitation, isolation and the maximization of common mode rejection ratio with respect to the half-cell potential difference due to different electrode materials. The final pre-amplifier circuit is assembled with 8 boards, each of which composing of 16 channels.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1465-1470
• /
• 2011

In this paper, we propose a new MAC protocol, namely DM-MMAC (Doze Mode Multi-Channel MAC) for ad hoe wireless networks which can utilize multiple channels effectively, thereby enhancing the network throughput considerably. Basically, the IEEE 802.11 specification allows for the use of multiple channels available at the physical layer, but its MAC protocol is designed only for a single channel with the fatal drawback, so called multi-channel hidden terminal problem in multi-channel environments. In this vein, several multi-channel MAC protocols have been proposed, but most of them demonstrate the performance problem that its throughput drastically decreases as the number of mobile hosts residing in a given network increases with small number of available channels. In this work, we tried to improve the performance of multi-channel MAC protocols in terms of network throughput as well as power saving effects by simplifying the channel assignment and channel capturing procedures and reducing the possibility of collisions between mobile hosts.

• Journal of electromagnetic engineering and science
• /
• v.12 no.3
• /
• pp.189-195
• /
• 2012

In this paper, we propose a novel protocol called a Multi-hop Diversity Transmission protocol in which the retransmission is realized by a relay that is Nearest to a current Source (MDTNS). We derive the mathematical expressions of the packet error rate (PER) and the average number of transmissions over Nakagami-m fading channels, and verify them by Monte Carlo simulations. The simulation results show that the MDTNS protocol improves the performance of the network in terms of PER when compared to the Multi-hop Diversity Transmission protocol in which the retransmission is done by a relay that is Nearest to Destination (MDTND) and to the conventional multi-hop transmission (CMT) protocol.

• Journal of Information Processing Systems
• /
• v.17 no.2
• /
• pp.227-241
• /
• 2021

Object detection techniques based on deep learning such as YOLO have high detection performance and precision in a single channel video stream. In order to expand to multiple channel object detection in real-time, however, high-performance hardware is required. In this paper, we propose a novel back-end server framework, a real-time AI vision platform (RAVIP), which can extend the object detection function from single channel to simultaneous multi-channels, which can work well even in low-end server hardware. RAVIP assembles appropriate component modules from the RODEM (real-time object detection module) Base to create per-channel instances for each channel, enabling efficient parallelization of object detection instances on limited hardware resources through continuous monitoring with respect to resource utilization. Through practical experiments, RAVIP shows that it is possible to optimize CPU, GPU, and memory utilization while performing object detection service in a multi-channel situation. In addition, it has been proven that RAVIP can provide object detection services with 25 FPS for all 16 channels at the same time.

• International Commerce and Information Review
• /
• v.10 no.2
• /
• pp.235-261
• /
• 2008

The purpose of the study is to test differences in consumers' satisfactions on products' competitiveness by domestic distribution channels of foreign clothing brands. Domestic distribution channels of foreign clothing brand consist of 5 channels as multi channel strategy. And product's competitiveness consists of prices, qualities, brand image and services. The results from the research show that there are differences in satisfaction by distribution channels. And they imply that distribution channel strategy is used with 5 channels in Korea, which are emphasized with different products' competitiveness. The contribution of the study is to analyze differences in consumer's satisfaction by 5 channels with data from consumer's perspectives, not firms' viewpoints.