• Nuclear Engineering and Technology
• /
• v.50 no.8
• /
• pp.1217-1233
• /
• 2018

Following a surge of interest in multi-unit risk in the last few years, many recent studies have suggested methods for multi-unit probabilistic safety assessment (MUPSA) and addressed several related aspects. Most of the existing studies though focused on two-unit nuclear power plant (NPP) sites or used rather simplified probabilistic safety assessment (PSA) models to demonstrate the proposed approaches. When considering an NPP site with three or more units, some approaches are inapplicable or yield very conservative results. Since the number of such sites is increasing, there is a strong need to develop and validate practical approaches to the related MUPSA. This article provides several detailed approaches that are applicable to multi-unit Level 1 PSA for sites with up to six or more reactor units. To validate the approaches, a multi-unit Level 1 PSA model is developed and the site core damage frequency is estimated for each of four representative multi-unit initiators, as well as for the case of a simultaneous occurrence of independent single-unit initiators in multiple units. For this purpose, an NPP site with six identical OPR-1000 units is considered, with full-scale Level 1 PSA models for a specific OPR-1000 plant used as the base single-unit models.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.975-983
• /
• 2020

Since the Fukushima Daiichi accident in 2011, concerns for the safety of multi-unit Nuclear Power Plant (NPP) sites have risen. This is because more than 70% of NPP sites are multi-unit sites that have two or more NPP units and a multi-unit accident occurred for the first time. After this accident, Probability Safety Assessment (PSA) has been considered in many countries as one of the tools to quantitatively assess the safety for multi-unit NPP sites. One of the biggest concerns for a multi-unit accident such as Fukushima is that the consequences (health and economic) will be significantly higher than in the case of a single-unit accident. However, many studies on multi-unit PSA have focused on Level 1 & 2 PSA, and there are many challenges in terms of public acceptance due to various speculations without an engineering background. In this study, two kinds of multi-unit Level 3 PSA for multi-unit site have been carried out. The first case was the estimation of multi-unit risk with conservative assumptions to investigate the margin between multi-unit risk and QHO, and the other was to identify the effect of time delays in releases between NPP units on the same site. Through these two kinds of assessments, we aimed at investigating the level of multi-unit risk and understanding the characteristics of risk in a multiunit context.

• Nuclear Engineering and Technology
• /
• v.44 no.5
• /
• pp.437-452
• /
• 2012

The Tohoku earthquake (Mw9.0) occurred on March 11, 2011 and caused a large tsunami. The Fukushima Dai-ichi NPP (F1-NPP) were overwhelmed by the tsunami and core damage occurred. This paper describes the overview of F1-NPP accident and the usability of tsunami PRA at Tohoku earthquake. The paper makes reference to the following current issues: influence on seismic hazard of gigantic aftershocks and triggered earthquakes, concepts for evaluating core damage frequency considering common cause failure with correlation coefficient against seismic event at multi units and sites, and concepts of "seismic-tsunami PSA" considering a combination of seismic motion and tsunami effects.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.41-53
• /
• 1999

The rate of automobile ownerships has been increased significantly in multi-family housing sites so that government has made new parking regulations increasing the rate of parking supply by the high demand of parking lots in multi-family housing sites. However, the new regulation of parking supply has several problems that it applies to only new multi-family housing sites and disregards to the locational distinctions around the sites. It also has reduced to the open spaces in the sites and increased the price of housing units especially to the small size units of multi-family housing sites by increasing the number of underground parking lots. Furthermore, the residents have not been equal opportunity to access their parking lots even though they have been charged to equal amount of financial burden for the construction of underground parking lots. This research aims to relieve above problems by analysing parking supply and demand management strategies both domestic and foreign countries, and suggest to new parking management system for multi-family housing sites in 21st Centuries. This research reveals that most of multi-family housing sites want to be applied 1) diverse parking supply regulations considering the locational distinctions of sites, 2) parking lot ownership programs, 3) charging parking fees to second vehicles, 4) increasing parking lots both in the sites and around the sites, 5) enforcing police power to the parking violation vehicles to their sites. Especially, the multi-family housing sites consisting of small & medium size of units and locating in small & medium size of cites strongly want to be accepted new Parking regulations considered their locational and social distinctions and applied police power to the parking violation vehicles in their sites compared to the other multi-family housing sites.

• Nuclear Engineering and Technology
• /
• v.53 no.2
• /
• pp.386-392
• /
• 2021

MACCS (MELCOR Accident Consequence Code System), WinMACCS, and MelMACCS now facilitate a multi-unit consequence analysis. MACCS evaluates the consequences of an atmospheric release of radioactive gases and aerosols into the atmosphere and is most commonly used to perform probabilistic safety assessments (PSAs) and related consequence analyses for nuclear power plants (NPPs). WinMACCS is a user-friendly preprocessor for MACCS. MelMACCS extracts source-term information from a MELCOR plot file. The current development can combine an arbitrary number of source terms, representing simultaneous releases from a multi-unit facility, into a single consequence analysis. The development supports different release signatures, fission product inventories, and accident initiation times for each unit. The treatment is completely general except that the model is currently limited to collocated units. A major practical consideration for performing a multi-unit PSA is that a comprehensive treatment for more than two units may involve an intractable number of combinations of source terms. This paper proposes and evaluates an approach for reducing the number of calculations to be tractable, even for sites with eight or ten units. The approximation error introduced by the approach is acceptable and is considerably less than other errors and uncertainties inherent in a Level 3 PSA.

• Nuclear Engineering and Technology
• /
• v.49 no.2
• /
• pp.286-294
• /
• 2017

The events at the Fukushima Daiichi Nuclear Power Station in March 2011 point out, among other matters, that concurrent accidents at multiple units of a site can occur in reality. Although site risk has been deterministically considered to some extent in nuclear power plant siting and design, potential occurrence of multi-unit accident sequences at a site was not investigated in sufficient detail thus far in the nuclear power community. Therefore, there is considerable worldwide interest and research effort directed toward multi-unit site risk assessment, especially in the countries with high-density nuclear-power-plant sites such as Korea. As the technique of probabilistic safety assessment (PSA) has been successfully applied to evaluate the risk associated with operation of nuclear power plants in the past several decades, the PSA having primarily focused on single-unit risks is now being extended to the multi-unit PSA. In this paper we first characterize the site risk with explicit consideration of the risk associated with spent fuel pools as well as the reactor risks. The status of multi-unit risk assessment is discussed next, followed by a description of the emerging issues relevant to the multi-unit risk evaluation from a practical standpoint.

• Korean Institute of Interior Design Journal
• /
• v.24 no.1
• /
• pp.169-177
• /
• 2015

The study aimed to classify the types of domestic dormitory furniture, and analyze the characteristics of each furniture type based on the empirical research methodology. The study consisted of literature review and field visit followed by survey and in-depth interview. The researchers collected 140 images of furniture from the web sites of 87 universities. Using affinity diagram, the dormitory furniture was classified into four different types: single fixed type, single semi-fixed type, multi fixed type, and multi semi-fixed type. The finding showed that the use of single fixed type was dominant in the domestic dormitory room, which had competitive price and easy maintenance. Both single fixed type and multi fixed type turned out to be lack of storage space. Meanwhile, both single semi-fixed type and multi semi-fixed type got the high value on the space efficiency due to the multi function. However, these two types could only be applied to a wide space enough for the furniture to be transformed and extended. The study analyzed the main characteristics of the dormitory furniture according to the type classification, and it is expected that this empirical study could work as a medium and database for the upcoming dormitory furniture design studies.

• Imaging Science in Dentistry
• /
• v.42 no.2
• /
• pp.65-70
• /
• 2012

Purpose : The aim of this study was to compare the effective dose for imaging of mandible between multi-detector computed tomography (MDCT) and cone-beam computed tomography (CBCT). An MDCT with low dose technique was also compared with them. Materials and Methods : Thermoluminescent dosimeter (TLD) chips were placed at 25 organ sites of an anthropomorphic phantom. The mandible of the phantom was exposed using 2 different types of MDCT units (Somatom Sensation 10 for standard-dose MDCT, Somatom Emotion 6 for low-dose MDCT) and 3 different CBCT units (AZ3000CT, Implagraphy, and Kavo 3D eXaM). The radiation absorbed dose was measured and the effective dose was calculated according to the ICRP 2007 report. Results : The effective dose was the highest for Somatom Sensation 10 (425.84 ${\mu}Sv$), followed by AZ3000CT (332.4 ${\mu}Sv$), Somatom Emotion 6 (199.38 ${\mu}Sv$), and 3D eXaM (111.6 ${\mu}Sv$); it was the lowest for Implagraphy (83.09 ${\mu}Sv$). The CBCT showed significant variation in dose level with different device. Conclusion : The effective doses of MDCTs were not significantly different from those of CBCTs for imaging of mandible. The effective dose of MDCT could be markedly decreased by using the low-dose technique.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.304-310
• /
• 2011

The populations of major cities in Australia are increasing rapidly and facing an acute housing shortage. Traditional apartment procurement techniques involve lengthy lead-times and factory-based, or offsite manufactured (OSM) multi-storey apartment buildings may offer the opportunity to help fulfill the need by significantly reducing build times. Other advantages of OSM may include superior quality, low weight ratios, economies of scale achieved through repetition of prefabricated units, use on infill sites, sustainable design standards and better occupational health and safety. There are also positive labour and training implications, which may help to alleviate an industry-wide shortage of skills through use of semi-skilled labour. Previous uncertainties about the adoption of offsite due to the high capital costs and perception issues were generally based on pre-cast concrete structures, which are quite a different building type in terms of flexibility, construction, delivery and finishes. Identification of drivers and constraints assists in the determination of current industry status, allows for a benchmark to be established and future opportunities and directions for OSM to be determined.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.275-284
• /
• 2017

As the 3D Greenery system is known to improve the urban environment, it works as new alternative for eco-friendly building and warrants further study for application to the domestic field. This study aimed to apply the design components for eco-friendly composition by investigating the spatial characteristics of the 3D Greenery System reflected in interior and exterior of buildings and to analyze the organization and design elements of domestic and foreign cases. The results showed that instances of the Greenery System tended to be a large scale and high-density development in order to expand various exterior spaces. Although its early forms were often found in such public facilities as exhibition and education purpose, cases of multi-unit dwelling have been growing. Allowing apartment residents to prefer intimate space by providing various such spaces for residential units and offering independent green spaces would induce diverse residents' lifestyles rather than monotonous design. The analysis also indicated that community space composed of various outdoor spaces and atmosphere would change life patterns of multi-housing and establish a real neighborhood through social interaction. Moreover, further investigation of the design patterns of outdoor space arrangement is needed since the Greenery system actively reflects the environmental characteristics of building sites and clearly shows a tendency to utilize natural terrain and slope in building shapes.