• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1015-1020
• /
• 2023

A multi-layer design is applied to mitigate single event effect (SEE) in a 28 nm System-on-Chip (SoC). It depends on asymmetric multiprocessing (AMP), redundancy and system watchdog. Irradiation tests utilized 70 and 90 MeV proton beams to examine its performance through comparative analysis. Via examining SEEs in on-chip memory (OCM), compared with the trial without applying the multi-layer design, the test results demonstrate that the adopted multi-layer design can effectively mitigate SEEs in the SoC.

• 한국통신학회논문지
• /
• 제33권7B호
• /
• pp.601-607
• /
• 2008

전기철도인 고속전철시설에 의한 통신선 유도전압을 계산하는데 있어서는 CCITT Directives에 의한 다도체계산법을 사용한다. 통신시스템계에 미치는 전력시스템계에 의한 유도의 영향력에는 다양한 차폐 요소들이 존재하여 경감 요율로서 사용된다. 철도시스템계에 있어서는 철도의 선로(레일) 자체에 의한 궤도효과가 존재하는데 다도체계산법에 있어서 궤도효과가 반영된 결과인지에 대하여는 계산법 자체에 명시되어 있지 않으므로 유도전압 계산의 적정성에 대하여 논란이 되고 있다. 이러한 기술 문제의 해결을 위하여 본 논문에서는 궤도효과가 영향을 미칠 수 있는 원리적 범위를 고찰하고 궤도효과의 적용과 관련된 일본 유도자료 등의 사례를 통하여 그 의미를 해석한다. 그리고 다도체계산법 자체에서의 궤도효과 적용성을 분석하였다. 아울러 계산 시뮬레이션을 통한 유도전압을 비교하여 궤도효과의 적용성을 검증한다. 이상의 분석 결과를 종합하여 볼 때 다도체계산법상에는 궤도효과가 포함되어 있는 것으로 결론지을 수 있다.

• 한국태양에너지학회 논문집
• /
• 제33권3호
• /
• pp.91-98
• /
• 2013

In this study, we have carried out development and performance evaluation of optimized MEMS(Multi-Effect-Multi-Stage) fresh water generator with $7m^2/day$ for solar thermal desalination system. The developed MEMS was composed of high temperature part and low temperature part. This arrangement has the advantage of increasing the availability of solar thermal energy. The MEMS consists of 2 steam generators, 5 evaporators, and 1 condenser. Tubes of heat exchanger used for steam generators, evaporators and condenser were manufactured by corrugated tubes. The performance of the MEMS was tested through in-door experiments, using an electric heater as heat source. The experimental conditions for each parameters were $20^{\circ}C$ for sea water inlet temperature to condenser, $8.16m^2$ /hour sea water inlet volume flow rate, $70^{\circ}C$ for hot water inlet temperature to generator of high temperature part, 3.6 4.8, 6.0 $m^2/hour$ for hot water inlet volume flow rate. As a result, The developed MEMS was required about 85 kW heating source to produce $7m^2/day$ of fresh water. It was analyzed that the performance ratio of MEMS was about 2.6.

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1369-1389
• /
• 2015

In order to investigate the behaviour of lying multi-stud connectors in cable-pylon anchorage zone, twenty-four push-out tests are carried out with different stud numbers and diameters. The effect of concrete block width and tensile force on shear strength is investigated using the developed and verified finite element model. The results show that the shear strength of the lying multi-stud connectors is reduced in comparison with the lying single-stud connector. The reduction increases with the increasing of the number of studs in the vertical direction. The influence of the stud number on the strength reduction of the lying multi-stud connectors is decreased under combined shear and tension loads compared with under pure shear. Yet, due to multi-stud effect, they still can't be ignored. The concrete block width has a non-negligible effect on the shear strength of the lying multi-stud connectors and therefore should be chosen properly when designing push-out specimens. No obvious difference is observed between the strength reductions of the studs with 22 mm and 25 mm diameters. The shear strengths obtained from the tests are compared with those predicted by AASHTO LRFD and Eurocode 4. Eurocode 4 generally gives conservative predictions of the shear strength, while AASHTO LRFD overestimates the shear strength. In addition, the lying multi-stud connectors with the diameters of 22 m and 25 mm both exhibit adequate ductility according to Eurocode 4. An expression of load-slip curve is proposed for the lying multi-stud connectors and shows good agreement with the test results.

• 한국안광학회지
• /
• 제9권2호
• /
• pp.353-359
• /
• 2004

Pseudomonas aeruginosa에 대한 soft contact lens 다목적 용액(multi purpose solution, MPS)의 항균효과의 검정을 탁도측정법에 의해 실시하였다. Muller Hinton Broth 액체배지에 pseudomonas aeruginosa를 배양한 후 5개사의 5종류의 MPS를 이용해 각각 시간별로 처리해 대조군과 비교하여 항균효과를 비교해 본 결과 한 제품을 제외하고는 거의 비슷한 효과를 나타내었다. 또한 동일한 조건하에서 MPS의 항균효과는 구성성분, pH에 따라 달라질 수 있으며 5개 회사제품 중 4개에서 pseudomonas aeruginosa에 대한 항균효과가 있는 것으로 나타났다.

• 대한본초학회지
• /
• 제23권3호
• /
• pp.149-154
• /
• 2008

Objectives : The purpose of this study is to investigate the biological Effect of multi-herbal drug 'KOCO-P1' on human hepatocyte HepG2 cells. Methods : Multi-herbal drug 'KOCO-P1' was composed of Ginseng Radix, Astragali Radix, Polygonati Rhizoma, Liriopis Tuber, and Scrophulariae Radix. Cytotoxicity and cytoprotective activity of KOCO-P1 was verificated by MTT assay. And antioxidative effect of KOCO-P1 against EtOH, Nicotine was inspected by Hydroperoxide assay. Results : KOCO-P1 showed no cytotoxicity on HepG2 cells for 24, 48 hours. KOCO-P1 at 50 ${\mu}g/mL$ reduced the production of H2O2 in HepG2 cells by EtOH. KOCO-P1 at 50 ${\mu}g/mL$ reduced the production of $H_2O_2$ in $HepG_2$ cells by Nicotine. Conclusions : KOCO-P1 at the low concentration could be supposed to have antioxidative effect on human hepatocyte with no cytotoxicity.

• 한국도로학회논문집
• /
• 제20권3호
• /
• pp.11-18
• /
• 2018

PURPOSES : Durability of concrete is traditionally based on evaluating the effect of a single deterioration mechanism such as freezing & thawing action, chloride attack, carbonation and chemical attack. In reality, however, concrete structures are subjected to varying environmental exposure conditions which often results in multi-deterioration mechanism occurring. This study presents the experimental results on the durability of concrete incorporating air-cooled slag(AS) and/or water-cooled slag(WS) exposed to multi-deterioration environments of chloride attack and freezing & thawing action. METHODS : In order to evaluate durable performance of concretes exposed to single- and multi-deterioration, relative dynamic modulus of elasticity, mass ratio and compressive strength measurements were performed. RESULTS :It was observed that multi-deterioration severely affected durability of concrete compared with single deterioration irrespective of concrete types. Additionally, the replacement of cement by AS and WS showed a beneficial effect on enhancement of concrete durability. CONCLUSIONS : It is concluded that resistance to single- and/or multi-deterioration of concrete is highly dependent on the types of binder used in the concrete. Showing the a good resistance to multi-deterioration with concrete incorporating AS, it is also concluded that the AS possibly is an option for concrete materials, especially under severe environments.

• 유통과학연구
• /
• 제13권4호
• /
• pp.55-64
• /
• 2015

Purpose - Multi-dimensional prices comprise multiple components such as monthly payments and a number of payments rather than a single lump-sum amount. According to previous studies, an increase in the number of price dimensions leads to a massive amount of cognitive stress resulting in incorrect calculation, and deterioration in the consistency of the price judgment. However, an increase only in the level of complexity of calculating multi-dimensional prices does not always result in a corresponding decrease in the accuracy of price evaluation. Since diverse variables could affect consumers' purchase-decision-making process, the results of price evaluation would be different. In this study, an empirical analysis was performed to determine how the accuracy of price evaluation varies depending on the extent of the complexity of price dimensions using product involvement and brand preference as moderating variables. Research design, data, and methodology - A survey was conducted on 260 students, and 252 effective responses were used for analysis. The data was analyzed using t-test, one-way ANOVA, and two-way ANOVA. In this study, six hypotheses were developed to examine the effect of product involvement and brand preference on consumers' evaluation effort of multi-dimensional prices. Results - As the number of price dimensions increased, accuracy of price evaluation appeared to be low in high involvement, as expected. However, it showed no differences in price evaluation effort when the level of complexity of calculating multi-dimensional prices is low. When a small number of price dimensions are presented in both cases of high and low involvement, accuracy of price evaluation is much higher in a weak brand preference. On the contrary, a strong brand preference enhances an accuracy of price evaluation only in case of low involvement when the number of price dimensions is increased. An interaction effect of product involvement and brand preference on consumers' evaluation of multi-dimensional prices did not exist irrespective of the level of complexity of calculating prices being high or low. Conclusions - When the number of price dimensions is small, consumers' effort for price evaluation shows almost no difference without the moderating effect of involvement, and a weak brand preference leads to a higher accuracy of price evaluation in an effort to make the best selection. No interaction effect of product involvement and brand preference was found except for a main effect of brand preference. When a price is composed of multiple dimensions rendering it more difficult to calculate the final price, the effort for price evaluation was expected to decrease only slightly in case of combination of high involvement and strong brand preference. This is because people have a higher purchase intentions and trust for that particular brand. However, the accuracy of price evaluation was much lower in cases of high involvement, and there was no interaction effect between product involvement and brand preference except for a main effect of involvement and brand preference, respectively.

• 한국유체기계학회 논문집
• /
• 제16권1호
• /
• pp.32-39
• /
• 2013

The multi-stage control valve is one of the devices which controls cavitation and high pressure drop. To attain the high pressure drop, the conventional control valves adopted the multi-stage trim to avoid the occurrence of local cavitation in valves. This work studied the effect of divergence angle on the characteristics of multi-stage trim. Pressure drop and flow characteristics was calculated for the 1 passage of multi-staged trim by using the FLUENT 6.3.26. The result showed that the pressure drop is significantly influenced by the divergence angle of multi-stage trim. In addition, the pressure drop increased consistently as the Reynolds number and divergence angle increases.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.668-676
• /
• 2017

A two-dimensional numerical investigation is performed to study the influence of slot width of multi-stage stationary floating overtopping wave energy devices on overtopping flow rate and performance. The hydraulic efficiency based on captured crest energy of different device layouts is compared with that of single-stage device to determine the effect of the geometrical design. The results show optimal trends giving a huge increase in overtopping energy. Plots of efficiency versus the relative slot width show that, for multi-stage devices, the greatest hydraulic efficiency is achieved at an intermediate value of the variable within the parametric range considered, relative slot width of 0.15 and 0.2 depending on design layouts. Moreover, an application of adaptive slot width of multi-stage device is investigated. The numerical results show that the overall hydraulic efficiency of non-adaptive and adaptive slot devices are approximately on par. The effect of adaptive slot width on performance can be negligible.