• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.274-281
• /
• 2006

Sensor network applications need synchronized time extremely such as object tracking, consistent state updates, duplicate detection, and temporal order delivery. This paper describes reliable time synchronization protocol (RTSP) for wireless sensor networks. In the proposed method, synchronization error is decreased by creating hierarchical tree with lower depth and reliability is improved by maintaining and updating information of candidate parent nodes. The RTSP reduces recovery time and communication overheads comparing to TPSN when there are topology changes owing to moving of nodes, running out of energy and physical crashes. Simulation results show that RTSP has about 20% better performance than TPSN in synchronization accuracy. And the number of message in the RTSP is $20%{\sim}60%$ lower than that in the TPSN when nodes are failed in the network. In case of different transmission range of nodes, the communication overhead in the RTSP is reduced up to 40% than that in the TPSN at the maximum.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.83-88
• /
• 2006

Many applications in the area of location-based services and personal navigation require nowadays the location determination of a user not only in outdoor environment but also indoor. To locate a person or object in a building, systems that use either infrared, ultrasonic or radio signals, and visible light for optical tracking have been developed. The use of WiFi for location determination has the advantage that no transmitters or receivers have to be installed in the building like in the case of infrared and ultrasonic based location systems. WiFi positioning technology adopts IEEE802.11x standard, by observing the radio signals from access points installed inside a building. These access points can be found nowadays in our daily environment, e.g. in many office buildings, public spaces and in urban areas. The principle of operation of location determination using WiFi signals is based on the measurement of the signal strengths to the surrounding available access points at a mobile terminal (e.g. PDA, notebook PC). An estimate of the location of the terminal is then obtained on the basis of these measurements and a signal propagation model inside the building. The signal propagation model can be obtained using simulations or with prior calibration measurements at known locations in an offline phase. The most common location determination approach is based on signal propagation patterns, namely WiFi fingerprinting. In this paper the underlying technology is briefly reviewed followed by an investigation of two WiFi positioning systems. Testing of the system is performed in two localization test beds, one at the Vienna University of Technology and the second at the Hong Kong Polytechnic University. First test showed that the trajectory of a moving user could be obtained with a standard deviation of about ${\pm}$ 3 m.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.2
• /
• pp.83-90
• /
• 2012

In this paper, an intelligent visual surveillance system based on a NIOS II embedded platform is implemented. By this time, embedded based visual surveillance systems were restricted for a special purpose because of high dependence upon hardware. In order to improve the restriction, we implement a flexible embedded platform, which is available for various purpose of applications. For high speed processing of software based programming, we improved performance of the system which is integrated the SOPC type of NIOS II embedded processor and image processing algorithms by using software programming and C2H(The Altera NIOS II C-To-Hardware(C2H) Acceleration Compiler) compiler in the core of the hardware platform. Then, we constructed a server system which globally manage some devices by the NIOS II embedded processor platform, and included the control function on networks to increase efficiency for user. We tested and evaluated our system at the designated region for visual surveillance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1275-1282
• /
• 2022

In this study, real-time character navigation using AR lens developed by Nreal is developed. Real-time character navigation is not possible with general marker-based AR because NPC characters must guide while moving in an unspecified space. To replace this, a markerless AR system was developed using Digital Twin technology. Existing markerless AR is operated based on hardware such as GPS, gyroscope, and magnetic sensor, so location accuracy is low and processing time in the system is long, resulting in low reliability in real-time AR environment. In order to solve this problem, using the SLAM technique to construct a space into a 3D object and to construct a markerless AR based on point location, AR can be implemented without any hardware intervention in a real-time AR environment. This real-time AR environment configuration made it possible to implement a navigation system using characters in tourist attractions such as Suncheon Bay Garden and Suncheon Drama Filming Site.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.325-332
• /
• 2022

In this study, real-time character navigation using AR lens developed by Nreal is developed. Real-time character navigation is not possible with general marker-based AR because NPC characters must guide while moving in an unspecified space. To replace this, a markerless AR system was developed using Digital Twin technology. Existing markerless AR is operated based on hardware such as GPS, gyroscope, and magnetic sensor, so location accuracy is low and processing time in the system is long, which results low reliability in real-time AR environment. In order to solve this problem, using the SLAM technique to construct a space into a 3D object and to construct a markerless AR based on point location, AR can be implemented without any hardware intervention in a real-time AR environment. This real-time AR environment configuration made it possible to implement a navigation system using characters in tourist attractions such as Suncheon Bay Garden and Suncheon Drama Filming Site.

• The KIPS Transactions:PartD
• /
• v.16D no.1
• /
• pp.1-10
• /
• 2009

One of major purposes of a RFID system is to track moving objects using tags attached to the objects. Because a tagged object has both location and time information expressed as the location of the reader, we can index the trajectory of the object like existing spatiotemporal objects. More efficient tracking may be possible if a spatiotemporal trajectory can be formed of a tag, but there has not been much research on tag trajectory indexes. A characteristic that distinguishes tags from existing spatiotemporal objects is that a tag creates a separate trajectory in each reader by entering and then leaving the reader. As a result, there is a trajectory interruption interval between readers, in which the tag cannot be located, and this makes it difficult to track the tag. In addition, the point tags that only enter and don't leave readers do not create trajectories, so cannot be tracked. To solve this problem, we propose a tag trajectory index called TR-tree (tag trajectory R-tree in RFID system) that can track a tag by combining separate trajectories among readers into one trajectory. The results show that TR-tree, which overcomes the trajectory interruption superior performance than TPIR-tree and R-tree.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.444-448
• /
• 2008

The ubiquitous smart home is the home of the future that takes advantage of context information from the human and the home environment and provides an automatic home service for the human. Human location and motion are the most important contexts in the ubiquitous smart home. We present a real-time human tracker that predicts human location and motion for the ubiquitous smart home. We used four network cameras for real-time human tracking. This paper explains the real-time human tracker's architecture, and presents an algorithm with the details of two functions (prediction of human location and motion) in the real-time human tracker. The human location uses three kinds of background images (IMAGE1: empty room image, IMAGE2:image with furniture and home appliances in the home, IMAGE3: image with IMAGE2 and the human). The real-time human tracker decides whether the human is included with which furniture (or home appliance) through an analysis of three images, and predicts human motion using a support vector machine. A performance experiment of the human's location, which uses three images, took an average of 0.037 seconds. The SVM's feature of human's motion recognition is decided from pixel number by array line of the moving object. We evaluated each motion 1000 times. The average accuracy of all the motions was found to be 86.5%.

• The KIPS Transactions:PartA
• /
• v.16A no.3
• /
• pp.209-216
• /
• 2009

The ubiquitous smart home is the home of the future that takes advantage of context information from the human and the home environment and provides an automatic home service for the human. Human location and motion are the most important contexts in the ubiquitous smart home. We present a real-time human tracker that predicts human location and motion for the ubiquitous smart home. We used four network cameras for real-time human tracking. This paper explains the real-time human tracker's architecture, and presents an algorithm with the details of two functions (prediction of human location and motion) in the real-time human tracker. The human location uses three kinds of background images (IMAGE1: empty room image, IMAGE2: image with furniture and home appliances in the home, IMAGE3: image with IMAGE2 and the human). The real-time human tracker decides whether the human is included with which furniture (or home appliance) through an analysis of three images, and predicts human motion using a support vector machine. A performance experiment of the human's location, which uses three images, took an average of 0.037 seconds. The SVM's feature of human's motion recognition is decided from pixel number by array line of the moving object. We evaluated each motion 1000 times. The average accuracy of all the motions was found to be 86.5%.

• Journal of Science Education
• /
• v.37 no.1
• /
• pp.142-156
• /
• 2013

The purpose of this study was to analyze observation characteristics through eye movement according to cognitive style. For this, developed observation task that can be shown the difference between wholistic cognitive style group and analytic cognitive style group, measured eye movement of university students who has different cognitive style, as given observation task. It is confirmed the difference between two cognitive style groups by analysing gathered statistics and visualization data. The findings of this study were as follows; First, Compared observation sequence and pattern by cognitive style, analytic cognitive style group is concerned with spider first and moving on surrounding environment, whereas wholistic cognitive style group had not fixed pattern as observing spider itself and surrounding area of spider alternately or looking closely on particular part at first. When observing entire feature and partial feature, wholistic cognitive style group was moving on Fixation from outstanding factor without fixed pattern, analytic cognitive style had certain directivity and repetitive investigation. Second, compared the ratio of observation, analytic cognitive style group gave a large part to spider the very thing, wholistic cognitive style group gave weight to surrounding area of spider, and analytic group shown higher concentration on observing partial feature, wholistic cognitive style group shown higher concentration on observing wholistic feature. Wholistic cognitive style group gave importance to partial features in surrounding area, and wholistic feature of spider than analytic cognitive style group, analytic cognitive style group was focus on partial features of spider than wholistic cognitive style group. Through the result of this study, there are differences of observing time, frequency, object, area, sequence, pattern and ratio from cognitive styles. It is shown the reason why each student has varied outcome, from the difference of information following their cognitive style, and the result of this study help to figure out and give direction to what observation fulfillment is suitable for each student.