• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.5
• /
• pp.36-42
• /
• 2003

A CFD simulation technique has been developed to handle the unsteady body motion with large amplitude by use of overlapping multi-block grid system. The three-dimensional, viscous and incompressible flow around body is investigated by solving the Navier-Stokes equations, and the motion of body is represented by moving effect of the grid system. Composite grid system is employed in order to deal with both the body motion with large amplitude and the condition of numerical wave maker in convenience at the same time. The governing equations, Navier-Stokes (N-S) and continuity equations, are discretized by a finite volume method, in the framework of an O-H type boundary-fitted grid system (inner grid system including test model) and a rectangular grid system (outer grid system including simulation equipments for generation of wave environments). If this study, several flow configurations, such as an oscillating cylinder with large KC number, are studied in order to predict and evaluate the hydrodynamic forces. Furthermore, the motion simulation of a Series 60 model advancing in a uniform flow under the condition of enforced roll motion of angle 20$^{\circ}$ is performed in the developed numerical wave tank.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.599-604
• /
• 2000

In order to study unsteady aerodynamic loads on high speed trains passing by each other at the speed of 350km/h, three-dimensional flow fields around trains during the crossing event are numerically simulated using the three-dimensional Euler equations. The Roe's FDS with MUSCL interpolation is employed to simulate wave phenomena properly. An efficient moving grid system based on domain decomposition techniques is developed to analyze the unsteady flow field induced by the restricted motion of a train on a rail. The numerical simulations of the trains passing by on the double-track are carried out to study the effect of the train nose-shape, the train length and the existence of tunnel when the crossing event occur. Unsteady aerodynamic loads side force and drag force-acting on the train during the crossing are numerically predicted and anlayzed. It is found that the strength of the side force mainly depends on the nose-shape, and that of drag force on tunnel existence. And it is observed that the push-pull like impulsive force successively acts on each car and acts in different directions between the neighborhood cars. The maximum change of the impulsive force reaches about 3 tons. These aerodynamic force data are absolutely necessary for the evaluation of the stability of the high speed multi-car train. The results also indicate the effectiveness of the present numerical method for the simulation of unsteady flow field induced by the bodies in the relative motion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.91-94
• /
• 2011

The LBSNS(Location-Based Social Networking Service) service has been well-received by researchers and end-users, such as Twitter. Location-Based service of Twitter is now structured that users could not subscribe the information of their interesting local area. Those who being following from someone tweet message included information of local area to them just for their own interesting. However, follower may receive that kind of tweet. In order to handle the problem, we propose filtering technique using spatial join. The first work for filtering technique is to add a location information to tweets and users. In this paper, location information is represented by MBR(Minimum Bounding Rectangle). Location information is divided into dynamic property and static property. Suppose that users are continuously moving, that means one of the dynamic property's example. At this time, a massive continous query could cause the problem in server. In this paper, we create Virtual Grid on Google Map for reducing frequency of query, and conclude that it is useful for server.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.9-18
• /
• 2009

Recently, due to the advanced technologies of mobile devices and wireless communication, there are many studies on telematics and LBS(location-based service) applications. because moving objects usually move on spatial networks, their locations are updated frequently, leading to the degradation of retrieval performance. To manage the frequent updates of moving objects' locations in an efficient way, a new distributed grid scheme, called DS-GRID (distributed S-GRID), and k-NN(k-nearest neighbor) query processing algorithm was proposed[1]. However, the result of k-NN query processing technique may be invalidated as the location of query and moving objects are changed. Therefore, it is necessary to study on continuous k-NN query processing algorithm. In this paper, we propose both MCE-CKNN and MBP(Monitoring in Border Point)-CKNN algorithmss are S-GRID. The MCE-CKNN algorithm splits a query route into sub-routes based on cell and seproves retrieval performance by processing query in parallel way by. In addition, the MBP-CKNN algorithm stores POIs from the border points of each grid cells and seproves retrieval performance by decreasing the number of accesses to the adjacent cells. Finally, it is shown from the performance analysis that our CKNN algorithms achieves 15-53% better retrieval performance than the Kolahdouzan's algorithm.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.704-715
• /
• 2017

For three-phase synchronization applications, the synchronous reference frame phase-locked loop (SRF-PLL) is probably the most widely used technique due to its ease of implementation and satisfactory phase tracking performance under ideal grid conditions. However, under unbalanced and distorted grid conditions, its performance tends to worsen. To deal with this problem, a variety of filtering stages have been proposed and used in SRF-PLLs for the rejection of disturbance components at the cost of degrading the dynamic performance. In this paper, to improve dynamic performance without compromising the filtering capability, an effective hybrid filtering stage is proposed and incorporated into the inner loop of a quasi-type-1 PLL (QT1-PLL). The proposed filtering stage is a combination of a moving average filter (MAF) and a modified delay signal cancellation (DSC) operator in cascade. The time delay caused by the proposed filtering stage is smaller than that in the conventional MAF-based and DSC-based PLLs. A small-signal model of the proposed PLL is derived. The stability is analyzed and parameters design guidelines are given. The effectiveness of the proposed PLL is confirmed through experimental results.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.78-83
• /
• 2000

An iterative time marching procedure for solving incompressible internal flow has been applied to the flow around a rotor-stator. This procedure solves three-dimensional incompressible Reynolds-averaged Navier-Stokes equation on a moving, time-deforming, non-orthogonal body-fitted grid using second-order accurate schemes for the time derivatives and third/second-order accurate schemes for the spatial derivatives. To handle rotationg geometry, the multiblock technique is applied and the overall flow domain is subdivided into two blocks. In each block, a grid is generated and flowfield is solved independently of the other blocks. The boundary data for each block is provided by the neighboring blocks using bilinear interpolation technique.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.77-81
• /
• 2007

In this paper, helicopter aerodynamics is simulated in hovering and forwarding flighst. The governing equation is the unsteady Euler equation. To consider the blade motion and moving effects, an overset grid technique is applied in this simulation. At the boundary, the Riemann invariants condition is used for inflow and outflow. To validate this method, the result is compared with Caradonna-Tung's experimental data.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.3
• /
• pp.47-57
• /
• 2013

Location privacy has been a serious concern for mobile users who use location-based services to acquire geographical location continuously. Spatial cloaking technique is a well-known privacy preserving method, which blurs an exact user location into a cloaked area to meet privacy requirements. However, cloaking for continuous moving object suffers from cloaked area size problem as it is unlikely for all objects travel in the same direction. In this paper, we propose a grid-based privacy preservation method with an improved Earth Mover's Distance(EMD) metric weight update scheme for semantic cloaking. We also define a representative cloaking area which protects continuous location privacy for moving users. Experimental implementation and evaluation exhibit that our proposed method renders good efficiency and scalability in cloaking processing time and area size control. We also show that our proposed method outperforms the existing method by successfully protects location privacy of continuous moving objects against various adversaries.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.650-655
• /
• 2016

In this study, a computational simulation of the internal flow characteristics was carried out for a Urea-SCR Injector. A single hole swirl injector with a swirl disk and slanted nozzle was used in this simulation. The maximum needle lift and opening velocity were selected as the design parameters. To analyze the unsteady internal flow characteristics of the Urea-SCR injector, the moving grid technique was applied to simulate the delicate needle movement. According to the simulation results, the injected mass flow rate from the Urea-SCR injector decreased with increasing needle opening velocity and maximum needle lift. This is because the Urea-solution tends to fill the empty space that the needle previously occupied. The swirl flow is decreased as the flow goes through the injector nozzle, because of the friction with the nozzle wall. Also, during the maximum needle lift period, the swirl coefficient and mean swirl coefficient increase with increasing needle lift. The results of this study may be used as the basic design data of related injectors.

• Journal of KIISE:Software and Applications
• /
• v.26 no.11
• /
• pp.1306-1313
• /
• 1999

본 연구는 인터넷 기반 공유가상공간에서 시스템의 확장성을 유지하기 위하여 이동객체를 대상으로 하는 이벤트 필터링 기법을 제안하고자 한다. 제안된 다중격자 모델 기법은 이동객체의 경로 상에서 대표적인 이벤트를 샘플링하는 방식을 사용한다. 이 방식은 메시지 트래픽의 양을 동적으로 조절하기 위하여 이동객체 간의 관심정도 정보를 수치적으로 변환하여 이벤트 갱신빈도에 반영한다. 대량의 이동객체를 생성하여 제안된 기법을 적용한 성능평가 실험에서 기존의 방식에 비하여 평균 메시지 전송량이 50%이상 감소하는 것으로 확인할 수 있었다. 다중격자 모델은 참여자의 수와 메시지 트래픽 상황에 따라 가상환경의 공유 QoS를 동적으로 조절할 수 있으며, 인터넷 상에서 다수 사용자를 위한 3차원 가상사회 구축 및 온라인 네트워크 게임 개발 등에 활용될 수 있을 것이다.Abstract This paper proposes an event filtering technique that can dynamically control a large amount of event messages produced by moving objects like avatars or autonomous objects in a distributed virtual environment. The proposed multi-level grid model technique uses the method that extracts the representative events from the paths of moving objects. For dynamic control of message traffics, this technique digitizes the DOIs of the avatars and reflects the interest information controlling the frequency of message transmission. For the performance evaluation, a large number of moving objects were created and the model was applied to these avatar groups. In the experiments, more than 50% of messages have been reduced in comparison with the existing AOI-based filtering techniques. The proposed technique can dynamically control the QoS in proportion to the number of users and the amount of messages where a large number of users share a virtual space. This model can be applied to the development of 3D collaborative virtual societies and multi-user online games in the Internet.