• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.900-902
• /
• 2000

A moving-coil-type linear oscillatory actuator is consisted of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure and an iron core as a pathway for magnetic flux. The inductance of moving coil and the push/pull effect is obtained from the permeance model of LOA with the open magnetic circuit. The analytical method are verified using the 2D finite element method.

• 한국멀티미디어학회논문지
• /
• 제10권8호
• /
• pp.967-980
• /
• 2007

동영상에서의 관심 객체를 추출하는 것은 비디오 내용 분석과 비디오 검색 및 압축의 성능을 개선시키는데 큰 역할을 한다. 관심 객체는 단순히 사람 눈의 시선을 끄는 대상물이 아니라 내용전개의 중심이 되거나 제작자가 표현하려고 하는 핵심 객체를 의미한다. 이러한 관심 객체는 움직이는 객체뿐만 아니라 정지해 있는 객체도 될 수 있으나, 사람의 관심을 절차적으로 표현하는 것이 어렵기 때문에 관심 객체를 명확하게 정의하기가 곤란하다. 이에, 본 논문에서는 동영상 샷에서의 움직이는 객체의 위치, 크기, 움직임 패턴의 변화에 대한 조건을 정의하여 필터링에 의해 사람의 관심을 끄는 움직임 관심 객체를 추출하는 방법을 제시하고, 아울러 동영상 샷에서 정지되어 있는 객체에 대해서도 컬러/텍스처 특이성, 위치, 크기, 출현 빈도 등에 대한 조건을 정의하여 정지 관심 객체도 추출할 수 있는 방법을 제안한다. 제안한 방법을 50개의 동영상 샷에 대하여 실험한 결과, 사람이 선정한 움직임 및 정지 관심 객체를 84% 정도 추출할 수 있음을 확인할 수 있었다.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.75-84
• /
• 2013

The seepage quantity analysis of reservoir embankment is very important for assessment of embankment safety. However, the conventional analysis does not consider uncertainty of soil properties. Permeability is known that the coefficient of variation is larger than other soil properties and seepage quantity is highly dependent on the permeability of embankment. Therefore, probabilistic analysis should be carried out for seepage analysis. To designers, however, the probabilistic analysis is not an easy task. In this paper, the method that can be performed probabilistic analysis easily and efficiently through the numerical analysis based commercial program is proposed. Stochastic response surface method is used for approximate the limit state function and when estimating the coefficients, the moving least squares method is applied in order to reduce local error. The probabilistic analysis is performed by LHC-MCS through the response surface. This method was applied to two type (homogeneous, core zone) earth dams and permeability of embankment body and core are considered as random variables. As a result, seepage quantity was predicted effectively by response surface and probabilistic analysis could be successfully implemented.

• 전산구조공학
• /
• 제4권2호
• /
• pp.103-110
• /
• 1991

컴퓨터의 제한된 코어메모리로 대형문제를 해결하기 위하여 디스크를 마치 메모리처럼 사용할 수 있는 가상 메모리 데이타베이스 기법을 개발하였다. 이 기법과 아울러 최대 가용코어메모리를 작동시키는 방식을 사용하여 유한요소 해석시 흔히 발생하는 스카이라인 형태로 저장된 대칭통산행예(Sparse Symmetric Matrix)에 대한 매우 효과적인 코어 내 및 코어 외 직립방정식의 해법을 개발하였다. 제안된 방법은 다른 코어 외 해법에 비해 알고리즘 및 코딩이 매우 간단하여 계산효율을 상당히 향상시켰다. 해석예에서는 제안된 방법을 사용하여 대규모 구조해석 문제를 메모리 용량이 작은 소형컴퓨터에서 대단히 효율적으로 해결하였음을 보여주었다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제9권2호
• /
• pp.48-57
• /
• 2017

In the last few years, banks have experienced more challenging market than any other times. They need to find new ways to reconnect with their customers and rebuild their trust. But in the race to the future some banks are taking clear lead. Research works show that while high perform leading banks are different, they also share some common characteristics and principles that have allowed them to move ahead to profitable growth. Cost cutting is no longer enough to succeed in tomorrow's world. Instead, the IT function needs to work shoulder-to-shoulder with the business to support the growth agenda. Therefore "C" level's attention is moving from cost reduction towards customer experience, speeding to market for new offerings, analytics and distribution channel enhancements, taking advantage of several levers that will shape the technology agenda for the high performing organization. Next generation of digital core-banking solutions will improve pre-existing capabilities, introduce new innovations and drive qualities such as flexibility and scalability to support time to market.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.86-88
• /
• 1994

In this paper, we present the design procedure and analysis the fundamental characteristics for Linear DC motor using permeance method and finite element method. Designed LDM is made of two permanent magnets, three iron core and amateur windings. For the design the LDM, first of all it is nessary to calculate the air gap flux density and thrust force, after that to determine core size, the numbers of winding turns, winding width, motor cross section area and losses in the coil. Also, we analysis the fundamental characteristics for implemented LDM according to proposed design procedure, and we find that the implemented LDM generated constant thrust force for costant current as long as iron of core is not saturated. Finally, we find that the proposed design procedure in this paper is effective to design and implementation of LDM.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.514-522
• /
• 2014

A new type of high precision electromagnetic suspension (EMS) which can support heavy tray along long stroke rail is proposed in this paper. Compared with the conventional EMS, the suggested moving-core typed EMS has the levitation electromagnets (EMs) on the fixed rail. This scheme has high load capability caused by iron-core and enables simple tray structure. Also it does not have precision degradation caused by heat generation from EMs, which is a drawback of conventional EMS. With these merits, the proposed EMS can be an optimal contactless linear bearing in next generation flat panel display (FPD) manufacturing process if the ability of long stroke movement is proved. So a special Section Switching Algorithm (SSA) is derived from the resultant force and moment equations of the levitated tray which enables long stroke movement of the tray. In order to verify the feasibility of the suggested SSA, a simple test-setup of the EMS with 2 Section-changes is made up and servo-controlled in the simulation and experiment. The simulation shows the perfect changeover the EMs, and the experiment shows overall control performance of under ${\pm}40{\mu}m$ gap deviations. These results reveal that the newly suggested contactless linear bearing can simultaneously achieve high load capability and precision gap control as well as long stroke.

• Wind and Structures
• /
• 제26권3호
• /
• pp.179-190
• /
• 2018

Translation of tornadoes is an important feature in replicating the near-ground tornado flow field which has been simulated in previous studies based on Ward-type tornado simulators using relative motion of the ground plane. In this laboratory investigation, effects of translation on the near-ground tornado flow field were studied using the ISU Tornado Simulator that can physically translate over a ground plane. Two translation speeds, 0.15 m/s and 0.50 m/s, that scale up to those corresponding to slowly-moving tornadoes in the field were selected for this study. Compared with the flow field of a stationary tornado, the simulated tornado with translation had an influence on the spatial distribution and magnitude of the horizontal velocities, early reversal of the radial inflow, and expansion of the core radius. Maximum horizontal velocities were observed to occur behind the center of the translating tornado and on the right side of its mean path. An increase in translation speed, resulted in reduction of maximum horizontal velocities at all heights. Comparison of the results with previous studies that used relative motion of the ground plane for simulating translating tornadoes, showed that translation has similar effects on the flow field at smaller radial distances (~2 core radius), but different effects at larger radial distances (~4 core radius). Further, it showed that the effect of translation on velocity profiles is noticeable at and above an elevation of ~0.6 core radius, unlike those in studies based on the relative motion of the ground plane.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.447-450
• /
• 2007

Positioning technology for moving object is an important and essential component of ubiquitous. Also RFID(Radio Frequency IDentification) is a core technology of ubiquitous wireless communication. In this study we adapted kalman-filter theory to RFID-based Positioning System in order to trace a time-variant moving object and verify the positioning accuracy using RMSE (Roong technology for moving object is an important and essential component of ubiquitous Mean Square Error). The purpose of this study is to verify an effect of kalman-filter on the positioning accuracy and to analyze what does each design factor have an effect on the positioning accuracy by means of simulations and to suggest a standard of optimal design factor of a RFID-based Positioning System. From the results of simulations, Kalman-filer improved the positioning accuracy remarkably; the detection range of RFID tag is not a determining factor. The smaller standard deviation of detection range improves the positioning accuracy. However it accompanies a smaller fluctuation of the positioning accuracy. The larger detection rate of RFID tag yields the smaller fluctuation in the positioning accuracy and has more stable system and improves the positioning accuracy;

• 한국수산과학회지
• /
• 제22권6호
• /
• pp.415-423
• /
• 1990

In a laboratory model the response of the boundary layer flow over topography is studied in a rotating sliced cylinder by employing the source-sink analogy with Ekman layer dynamics. The boundary layer flow is produced by two different fluid. In the first experiment homogeneous fluid is used both for the source and the working fluid of the container. In the second experiment a denser fluid is used for the source with the same working fluid. For the homogeneous western boundary layer flow both the northward and the southward flow were affected by the topography(ridge) to produce a cyclonic motion near the ridge. When woughward moving heavy boundary flow of slower speed and the northward moving faster flow were present at the same time, the splitting of southward flow and the separating of the northward flow were observed with a cyclonic motion at the ridge. The most important factor that influence production of the cyclonic motion has been turned out to be the presence of the topography in the western boundary layer. In particular the role of the southward moving heavy flow over the interior flow pattern was found to be very significant.