• 감성과학
• /
• 제17권2호
• /
• pp.91-100
• /
• 2014

본 연구에서는 P300 문자입력기의 물리적 특성에 해당하는 문자판의 시각도와 사용자의 개인적 특성에 해당하는 시선응시 방법이 P300 문자입력기의 정확도에 미치는 영향을 검증하였다. 문자판의 시각도는 사용자와 문자판 간의 거리로 조작하였으며, 60 cm 집단과 100 cm 집단, 150 cm 집단으로 구성하였다. 시선응시방법은 세 조건으로 반복측정하였다. 머리 조건은 머리를 움직여서 시선을 두는 조건이었으며, 눈동자 조건은 머리는 고정한 채 눈동자를 움직여서 시선을 두는 조건이었고, 시선고정 조건은 시선을 문자입력기의 중앙에 고정시킨 조건이었다. 이요인설계에 의한 실험결과, 문자입력의 정확도가 시선응시방법에 따라 유의한 차이가 있었다. 머리 조건의 정확도가 눈동자 조건의 정확도 보다 높았으며, 눈동자 조건의 정확도가 시선고정 조건의 정확도 보다 높았다. 그러나 문자판의 시각도와 상호작용효과는 모두 유의하지 않았다. 시선응시방법에 따라 목표문자의 P300 진폭을 측정한 결과, 머리조건의 P300이 눈동자 조건의 P300보다 더 컸다. 머리조건과 눈동자 조건 간에는 오류분포에서 큰 차이가 없었지만, 시선고정 조건은 나머지 두 조건과 큰 차이를 보였다. 머리조건과 눈동자 조건에서는 오류가 주로 목표문자와 인접한 문자에서 나타난 반면, 시선고정 조건은 오류가 상대적으로 넓게 분포하였으며, 문자판의 중심에서 멀리 떨어져 있는 문자들에서 오류가 많이 발생하였다.

• Nuclear Engineering and Technology
• /
• 제53권2호
• /
• pp.446-454
• /
• 2021

Critical heat flux (CHF) has traditionally been evaluated using look-up tables or empirical correlations for nuclear power plants. However, under complex moving condition, it is necessary to reconsider the CHF characteristics since the conventional CHF prediction methods would no longer be applicable. In this paper, the additional forces caused by motions have been added to the annular film dryout (AFD) mechanistic model to investigate the effect of moving condition on CHF. Moreover, a theoretical model of the natural circulation loop with additional forces is established to reflect the natural circulation characteristics of the loop system. By coupling the system loop with the AFD mechanistic model, a CHF prediction program called NACOM for natural circulation loop under moving condition is developed. The effects of three operating conditions, namely stationary, inclination and rolling, on the CHF of the loop are then analyzed. It can be clearly seen that the moving condition has an adverse effect on the CHF in the natural circulation system. For the calculation parameters in this paper, the CHF can be reduced by 25% compared with the static value, which indicates that it is important to consider the effects of moving condition to retain adequate safety margin in subsequent thermal-hydraulic designs.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.42-49
• /
• 1998

This wear debris can be harvested from the lubricants of operating machinery and its morphology is directly related to the damage to the interacting surface from which the particles originated. The morphological identification of wear debris can therefore provide very early detection of a fault and can also often facilitate a diagnosis. The purpose of this study is to attempt the developement of intelligent system for moving condition diagnosis of the machine driving system. The four shape parameter(50% volumetric diameter, aspect, roundness and reflectivity) of war debris are used as inputs to the neural network and learned the moving condition of five values(material3, applied load 1, sliding distance 1). It is shown that identification results depend on the ranges of these shape parameter learned. The three kinds of the wear debris had a different pattern characteristics and recognized the moving condition and materials very well by neural network.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.92-97
• /
• 1998

The morpholgies of the wear particles are directly indicative of wear processes occuring in machinery and their severity. The neural network was applied to identify wear debris generated from the machine driving system. The four parameters(50% volumetric diameter, aspect, roundness and reflectivity) of wear debris are used as inputs to the network and learned the friction condition of five values(material 3, applied load 1, sliding distance 1). It is shown that identification results depend on the ranges of these shape parameters learned. The three kinds of the wear debris had a different patter characteristic and recognized the friction condition and materials very well by artificial neural network. We discussed how the network determines differencee in wear debris feature, and this approach can be applied to foreseeability and decisio for moving condition of the Machine driving system.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.135-144
• /
• 1997

This wear debris can be harvested from the lubricants of operating machinery and its morphology is directly related to the damage to the interacting surfaces from which the particles originated. The morphologies of the wear particles are therefore directly indica- rive of wear processes occuring in machinery and their severity. The neural network was applied to identify wear debris generated from the lubricated moving system. The four parameter(50% volumetric diameter, aspect, roundness and reflectivity) of wear debris are used as inputs to the network and learned the friction condition of five values(material 3, applied load 1, sliding distance 1). It is shown that identification results depend on the ranges of these shape parameter learned. The three kinds of the wear debris had a different pattern characteristic and recognized the friction condition and materials very well by neural network. We dicuss how the network determines difference in wear debris feature, and this approach can be applied to condition diagnosis of the lubricated moving system.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.61-68
• /
• 1991

본 연구에서는 스프링힌지, 클램프, 단순지지, 탄성지반, 다수의 병진 및 회 전스프링 그리고 중간지지점의 조합으로 구성되어 있는 보에 대하여 우선 Hamilton원 리에 의하여 정확한 보의 특성방정식을 유도하고 모든 경계조건을 만족하는 직교다항 식을 구한 후, 스프링, 댐퍼로 구성된 여러개의 질량이 일정한 속도로 이동할 경우에 대하여 Galerkin방법과 수치적분 방법을 사용하여 동적응답을 구하였다. 또한 구속 조건 및 경계조건이 변함에 따라 동적응답에 미치는 영향을 연구하였다.

• 한국항공우주학회지
• /
• 제35권8호
• /
• pp.670-676
• /
• 2007

A comparative study on ground boundary conditions for the airfoil in ground effect has been carried out. The objective of the present study is to clarify effects of the ground boundary conditions so that it will be helpful to analyse results of wind tunnel tests using the fixed ground board or the image method. A low Mach number preconditioned Navier-Stokes solver using the overlap grid method has been applied. It has been turned out that results with the symmetric boundary condition are almost the same to those with the moving boundary condition. Results with the fixed ground boundary show discrepancy to those with the moving boundary condition when flow separation on the ground board takes place.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 1998년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring 1998
• /
• pp.98-105
• /
• 1998

In this study, the boundary element analysis in dynamics for the multilayered semi-infinite plane is developed using the fundamental solution for moving loads. Also the indirect method and superposition method are introduced to consider the multilayered systems and moving loads. At each layer the fundamental solution can be obtained by solving the governing equation which is transformed by the Fourier transform. The governing equation can be solved by three conditions; continuity conditions of displacement and stress, the traction free condition at the surface and the radiation condition at the surface and the radiation condition at the infinite distance. To verify the solution and the developed algorithm, the theoretical solution for the homogeneous layer and commercial FEM program is compared with the results of this study.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권1호
• /
• pp.79-87
• /
• 1999

The most part of the faculty drop a trouble and damage of machine equipment even if whatever cause they break out take place at local and trifling place and the factor dominating their trouble is due to wear debris occurred in the lubricated machine moving surface. This study has been car-ried out to identify morphology of wear debris on the lubricated machine moving system by means of computer image analysis. Namely the wear debris contained in lubricating oil extracted from movable machine equipment will be filtered through membrane filter(void diameter 0.45${\mu}m$) and will be analyzed with its data information such as 50% volume diameter aspect roundness and reflectivity. Morphological characteristic of wear debris is easily distinguished by four shape parameters it is necessary to divide small class of every 100 wear debris in total wear particles in order to distinguish morphological characteristic of wear debris more easily by computer image analysis. We are sure that operation condition diagnosis of the lubricated machine moving surfaces is possible by computer image analysis.

• 한국철도학회논문집
• /
• 제19권1호
• /
• pp.54-66
• /
• 2016

이 연구에서는 흡수경계조건을 적용하여 경계부분에서 발생한 갑작스런 하중조건의 변화에 의해 발생한 탄성파의 전달 및 반사현상을 감소시키고자 하였으며, 흡수경계조건이 사용 유무에 따른 효과를 검증하였다. 또한, 정점하중재하의 경우와 이동하중에 의한 동적해석결과를 비교함으로써 정점하중재하가 이동하중을 적절히 표현할 수 있는가의 여부를 분석하였다. 주행속력의 변화에 따른 KTX 열차조건에서의 이동하중에 의한 동적해석을 수행하여 아스팔트 콘크리트 궤도에서의 동적안정성을 검토하였으며, 준정적인 표준 열차하중에 의한 해석결과를 비교함으로써 아스팔트 콘크리트 궤도의 구조 안전성을 확인하였다.