• Parasites, Hosts and Diseases
• /
• 제41권2호
• /
• pp.97-100
• /
• 2003

Acute gastric anisakiasis with multiple anisakid larvae infection is reported. A 68-year-old woman residing in Busan, Korea, had epigastric pain with severe vomiting about 5 hours after eating raw anchovies. Four nematode larvae penetrating the gastric mucosae in the great curvature of the middle body and fundus were found and removed during gasteroendoscopic examination. Another one thread-like moving larva was found in the great curvature of upper body on the following day. On the basis of their morphology, the worms were identified as the 3rd stage larvae of Anisakis simplex. This case is acute gastric anisakiasis provoking severe clinical problems by the multiple infection and the greatest number of anisakid larvae found in a patient in Korea.

• 한국정밀공학회지
• /
• 제18권2호
• /
• pp.63-71
• /
• 2001

This paper introduces a method for calculation of dynamic stress occurring in flexible bodies of a moving multibody system by using commercial softwares DADS for dynamic analysis and MSC/NASTRAN for finite element analysis. Three methods for model transient response analysis of a flexible body are summarized. Elastic deformation of a flexible body can be described with normal modes and static modes composed of constraint modes and residual attachment modes. The deformation modes divided into fixed-interface modes and free-interface modes can be determined by using MSC/NASTRAN and selected for dynamic analysis. The dynamic results obtained from DADS are utilized to calculate dynamic stress by using mode-displacement method or mode-acceleration method of MSC/NASTRAN. As a numerical example of the analysis, we used a three dimensional slider-crank model with a flexible connecting rod.

• Journal of electromagnetic engineering and science
• /
• 제14권4호
• /
• pp.336-341
• /
• 2014

Dosimetry of radiating electromagnetic wave from mobile devices to human body has been evaluated by measuring Specific Absorption Rate (SAR). Usual SAR measurement system scans the volume by robot arm to evaluate RF power absorption to human body from wireless devices. It is possible to fast estimate the volume SAR by software deleting robot moving time with the 2D surface SAR data acquired by arrayed probes. This paper shows the principle of fast SAR measurement and the measured data comparison between the fast SAR system and the robot scanning system. Data of the fast SAR is well corresponding with data of robot scanning SAR within ${\pm}3$ dB, and its dynamic range covers from 10 mW/kg to 30 W/kg with 4.8 mm probe diameter.

• ETRI Journal
• /
• 제33권2호
• /
• pp.259-266
• /
• 2011

We present a new method for an automated markerless system to describe, analyze, and classify human gait motion. The automated system consists of three stages: I) detection and extraction of the moving human body and its contour from image sequences, ii) extraction of gait figures by the joint angles and body points, and iii) analysis of motion parameters and feature extraction for classifying human gait. A sequential set of 2D stick figures is used to represent the human gait motion, and the features based on motion parameters are determined from the sequence of extracted gait figures. Then, a k-nearest neighbor classifier is used to classify the gait patterns. In experiments, this provides an alternative estimate of biomechanical parameters on a large population of subjects, suggesting that the estimate of variance by marker-based techniques appeared generous. This is a very effective and well-defined representation method for analyzing the gait motion. As such, the markerless approach confirms uniqueness of the gait as earlier studies and encourages further development along these lines.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2016년)
• /
• pp.15-18
• /
• 2016

본 연구는 조류발전 터빈의 블레이드 형상 최적화 해석 시스템 개발에 대한 사전연구의 일환으로 EDISON CFD의 프로펠러 단독성능 S/W와 SNUFOAM ShipMesh Advanced 자동격자생성기를 이용하여 조류발전 터빈 주위 유동장에 대한 수치해석을 수행하였다. TSR 조건 변화에 따라 수치해석을 수행하고 이에 대한 power, total coefficient를 동일한 조건에서 수행된 실험결과와 비교 검증하여 해석자의 신뢰도를 확인하였다. 또한, 블레이드 전체를 모델링한 full body 해석과 하나의 블레이드만을 모델링한 single body 해석 결과를 비교하여 경제적이면서 정도 높은 터빈 성능해석 프로세스를 제안하였다. 조류발전 터빈의 TSR 조건 변화에 따라 낮은 TSR 조건에서는 국부적 와동발생에 의해 $C_P$가 감소하는 것을 확인하였고 설계 TSR에서 가장 좋은 효율을 보임을 확인하였다. 이를 통해 suction side의 압력 분포, 팁 와동의 강도 등 성능개선을 위한 주요한 설계변수를 식별하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.127-128
• /
• 2017

먼저 어깨의 안쪽돌림과 가쪽돌림은 몸통에 어깨가 일직선이 되도록 한고 손을 들어서 팔꿈치는 몸통과 수평이 되도록 하며, 이때 손이 안쪽이나 바깥쪽으로 향하도록 움직이는 것을 말한다. 어깨의 안쪽돌림과 가쪽돌림을 측정하여 측정각이 부족하거나 통증을 유발할 시 그에 따른 치료법을 알아보도록 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.417-420
• /
• 2005

This paper presents an analytical method to evaluate the dynamic behavior of the scroll compressor. Unbalanced forces and moments act on the compressor body because of the reaction forces acting on rotating components like the orbiting scroll, Oldham coupling ring, and the crank shaft. The vibration of the compressor is induced by the forces and the moments. In this paper, through modeling of the leakage flow, solving the forces from the equations of motion of the moving parts, the analysis of vibration of the compressor was performed. According to the operating condition, the variation of acceleration of the compressor body were calculated and compared.

• 한국군사과학기술학회지
• /
• 제22권4호
• /
• pp.441-451
• /
• 2019

When a store is launched, the umbilical plug should be separated from the launcher without any physical interference and fragments. In order to satisfy these conditions, an umbilical plug and an umbilical separating device were designed. The plug is separated from the receptacle of the store while moving along inclined planes by the store thrust and the spring force connected from the launcher to the plug. As a result of the prototype test, the hanger on the store collided with the plug. Several tests were conducted after some actions were taken to prevent the collision. However, not only the same phenomenon was repeated, but also fragmentation occurred. In this study, the non-colliding conditions were analyzed through rigid and flexible multi-body dynamics analysis.

• 대한한의학원전학회지
• /
• 제12권2호
• /
• pp.166-174
• /
• 1999

Meridians are often defined as passway of Ki and Blood or something that can control funtions of the body. It is true but I think meridians have something more than that. Meridians are not just passway of Ki and Blood, rather they receive Ki from outside and transform it into Essence-Ki(精氣). If we draw a line in a body, we have Chang-Pu inside and meridians outside. Chang-Pu whim is inside our body hold Essence-Ki and manipulate it. These Chang-Pu also have variation of Ki accumulation-Tai-Yang, Soyang, T'ae$\breve{u}$m, Soum. Nevertheless, their gradients are not great so Ki flow among them are not great either. If there are much Ki flow in our body there will be much Ki consumption resulting in exhaustion of Essence-Ki, which is very hard to acquire. Therefore Chang-Pu keeps less gradient by not moving Ki a lot to preserve Essence-Ki. Chang-Pu, inside, are suitable for storing Ki while meridians, outside, are for producing Ki. Meridinas have great difference in Ki accumulation so there are great flow of Ki. This nature is suitable for producing Ki. For example, roots and limbs of a tree don't have much gradient in Ki. They are concentrated and their shape are not very distinct. On the other hand, leaves are wide and it's easy to tell front from back. It means their Ki gradient is great and their Ki flow is also great. Therefore they suitable for producing Ki. Just like this, meridians in our body are suitable for producing Ki. Areas that meridians cover are much wider than that of Chang-Pu. Four limbs and surface of our body are very distinctive. Ulnar side is high in Ki accumulation but is small in volume so it's better to store Ki there. Radial side is low in Ki accumulation but big in volume so it's better to receive and consume Ki there. Meridians are deeply involved in producing and storing Ki.

• 복식문화연구
• /
• 제26권3호
• /
• pp.313-326
• /
• 2018

Over the past few years, companies have started moving into specific niches in plus-size fashion. The purpose of this study was to verify the marketability of young plus-size clothes in the USA. Data were collected from female consumers aged from 20 to 39 who have experience of purchasing plus-size items. A total of 282 responses were used for statistical analysis. The research result is as follows. First, the obesity stress is affected more by the subjective obesity level than by the objective obesity level and by how people recognize their body types. Second, from an analysis of the factors affecting the shopping orientation of plus-size consumers, style consciousness, pursuing reasonable, emphasizing comfort, and body consciousness are found to be important factors. Third, even if responders are aware of their exact body size, they actively look for the correct size. Fourth, fit evaluation of plus-size products is based on the factors of size fit and movement fit. The respondents were unsatisfied with chest and arm measurements, which deviate widely by body type for tops. Fifth, the overall dissatisfaction with the plus-size market is attributed to the fact that the product assortment range from which to select styles is narrow, and trend reflection is low. Sixth, the respondents tended to avoid fabrics that make their body type more obvious, textures that give the impression of a larger body size, or stiff textures. These results show that the psychological and physical characteristics of obese consumers should be considered to develop products for the young plus-size market.