• Journal of Oral Medicine and Pain
• /
• 제22권1호
• /
• pp.167-181
• /
• 1997

The aim of this study was to investigate the relationship between velocity and factors which could affect the velocity of mandibular movement. For this study, 30 dental students without any masticatory signs and symptoms and 90 patients with temporomandibular disorders(TMD) were selected as the control group and the patients group, respectively. After determining Angle's classification and lateral guidance pattern of occlusion, clinical examination for TMD was perfomed. Velocity and distance of mandibular movements were recorded with BioEGN, reproducibility index of lateral excursions was evaluated by Pantronic(PRI) and BioEGN (BERI) activity in masticatory and cervical muscles were measured with BioEMG, and occlusal contact time and cross-arch unbalance(Total left-right statistics, TLR) on clenching were recorded with T-scan, respectively. The results of this study were as follows : 1. Velocity in the patients was faster than that in the controls in most mandibular movements, but on wide opening and closing movement, result was reverse. 2. Velocity on closing movements were faster than that on opening movements in the control group and a similar tendency was also shown in the patients group. 3. Patients with muscle disorders showed a tendency to have the highest value of velocity of all diagnostic subgroups, while patients with degenerative joint diseases showed a tendency to have the lowest value. 4. Patients with canine guidance showed a tendency to have the highest value of velocity in three subgroups by lateral guidance pattern, while patients with group function showed a tendency to have the lowest value. 5. BERI had a positive correlation with opening velocity on lateral excursion, while TLR had a negative correlation with opening velocity on swallowing. 6. EMG activity on clenching in masticatory muscles had negative correlation with opening velocity on border movements, and on swollowing, while the activity in rest correlated positively with opening velocity on border movements. 7. There were positive correlation between the velocity and the distance in long components of mandibular trajectory.

• 동의생리병리학회지
• /
• 제19권2호
• /
• pp.358-362
• /
• 2005

Directional words like 'ascending(升, sheng)', 'descending(降, jiang)', 'floating(浮, fu)', 'sinking(沈, chen) are technical terminologies of Oriental Medicine to express the directions of material medica functioning-at the phase of Qi-superiorly, inferiorly, exteriorly, and interiorly in human body, and are constituting one of the major principles in prescribing medicines. Lacking the objective methodology to measure or, at least determine Qi, However, we can not expect to secure meaningful data to verify those directional terms. This problematic situation caused chaotic discrepancy between theory and practice of Oriental Medicine. Thus, adopting the method of dynamic meditation 'Hanalmomjit' of Lux Vitae meditation society, by which various state of Qi-sensational movements can be expressed, we compared its moves with the directional terms of traditional canons in Oriental Medicine. In this thesis, the experiment of expressing materia medica via 'Hanalmomjit' is resulted out and compared with the terms, confirmed to have a certain meaningfulness. The new method showed these results below: Herba Menthae, described to have the disposition of ascending and floating, showed 60% of ascending movements in 'Hanalmomjit' experiment. Radix Rehmanniae Praeparata, described to have the disposition of descending and sinking, showed 50% of descending movements. Radix Glycyrrhizae, described to have plain disposition, showed 60% of central movements. Rhizoma Atractylodis and Pericarpium Citri Reticulatae, described to have the disposition of ascending and floating, showed also ascending movements. Cortex Magnoliae Officinalis, described to have the disposition of descending and sinking, showed also descending movements. In conclusion, qi-sensational movement of 'Hanalmomjit' for materia medica showed sufficient relations described in classics, proving itself to be useful method for objective demonstration of material medica.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.617-626
• /
• 2023

In this study, three-dimensional numerical parametric study was conducted to explore deformation mechanisms of grouped piled-raft-foundation due to lateral load in clays. Effects of load intensity, loading angle, soil stiffness, pile diameter, pile spacing and pile length on foundation deformations were explored. It is found that the smallest and largest movements of pile foundation are induced when the loading angles are 0° and 30°~60°, respectively. By increasing loading angle from 0° to 30°~60°, the resultant horizontal movements and settlements increase by up to 20.0% and 57.1%, respectively. Since connection beams can substantially increase integrity of four piled raft foundation, resultant horizontal movements, settlements and bending moments induced in the piled raft foundation decrease by up to 54.0%, 8.8% and 46.3%, respectively. By increasing soil stiffness five times, resultant horizontal movements and settlements of pile foundation decrease by up to 61.7% and 13.0%, respectively. It is indicated that effects of connection beam and soil stiffness on settlements of pile foundation are relatively small. When pile diameter is less than 1.4 m, deformations of piled raft foundation decrease substantially as a reduction in the pile diameter. Two dimensional groups are proposed to develop calculation charts of horizontal movements and settlements of pile foundation. The proposed calculation charts can directly estimate movements of piled raft foundation under arbitrary loading, ground and pile conditions.

• Geomechanics and Engineering
• /
• 제36권6호
• /
• pp.563-573
• /
• 2024

In this study, various countermeasures used to mitigate tunnel deformations due to nearby multi-propped basement excavation in soft clay are explored by three-dimensional numerical analyses. Field measurements are used to calibrate the numerical model and model parameters. Since concrete slabs can constrain soil and retaining wall movements, tunnel movements reach the maximum value when soils are excavated to the formation level of basement. Deformation shapes of an existing tunnel due to adjacent basement excavation are greatly affected by relative position between tunnel and basement. When the tunnel is located above or far below the formation level of basement, it elongates downward-toward or upward-toward the basement, respectively. It is found that tunnel movements concentrate in a triangular zone with a width of 2 H_e (i.e., final excavation depth) and a depth of 1 D (i.e., tunnel diameter) above or 1 D below the formation level of basement. By increasing retaining wall thickness from 0.4 m to 0.9 m, tunnel movements decrease by up to 56.7%. Moreover, tunnel movements are reduced by up to 80.7% and 61.3%, respectively, when the entire depth and width of soil within basement are reinforced. Installation of isolation wall can greatly reduce tunnel movements due to adjacent basement excavation, especially for tunnel with a shallow burial depth. The effectiveness of isolation wall to reduce tunnel movement is negligible unless the wall reaches the level of tunnel invert.

• 전기전자학회논문지
• /
• 제17권4호
• /
• pp.505-510
• /
• 2013

본 논문에서는 Electrocorticogram(ECoG) 신호를 이용하여 손과 팔꿈치의 움직임을 추론하는 방법을 제안한다. 환자로부터 다수의 채널을 이용하여 표면 근전도 신호와 ECoG 신호를 동시에 취득하였다. 추론하는 동작은 손을 쥐었다 펴는 동작과 팔꿈치를 안으로 굽히는 동작이며, 외부 자극에 의해 동작을 수행하는 방법 대신 환자의 자유의지에 의해 동작을 수행하게 하였다. 표면 근전도 신호를 이용하여 동작을 수행한 운동 시점을 찾고, ECoG 신호를 이용하여 동작을 추론한다. 각 동작의 특징을 추출하기 위하여 ECoG 신호를 전체 대역을 포함한 ${\delta}$, ${\Theta}$, ${\alpha}$, ${\beta}$, ${\gamma}$ 총 6개의 대역을 나누어 정보 엔트로피를 구하고, 최대우도추정법을 사용하여 동작을 추정하였다. 실험 결과 감마대역의 ECoG를 사용할 경우 다른 대역을 사용할 때 보다 높은 평균 74%의 성능을 보이며, 다른 대역보다 감마 대역에서 높은 추정 성공률을 보였다. 또한 운동 시점을 기준으로 3개의 시간 구간으로 나누어 준비전위를 포함하는 'before' 구간과 'onset' 구간을 비교하였다. 'before' 구간과 'onset' 구간에서 추정 성공률은 각각 66%, 65%로 준비전위를 이용할 수 있다는 것을 알 수 있었다.

• 한국가정과학회지
• /
• 제7권3호
• /
• pp.35-48
• /
• 2004

In this study, by determining lower limb movements which cause significant changes in body surface lines, body parts with the greatest maximum expansion and contraction rate respectively were illustrated in descending order. Using unmarried female university students aged 18 - 24 as subjects, a total of 32 body surface categories (15 body surface lines and 17 body surface segment lines) were measured in one static and 9 movement poses. In particular, expansion and contraction levels and rates were measured and used in the analysis. The analysis first involved the calculation of the average measurement per body part in body surface line in static pose as well as of the average expansion and contraction levels and rates in 9 lower limb movements. Two-way MANOVA and multiple comparison analysis (Tukey) were conducted on movements and individual somatotypes regarding measurement per body part and expansion and contraction rates. Movements which cause measurements of body surface lines differed significantly in body surface line in static pose versus in movement were then identified. Among average expansion and contraction rates in such movements, maximum average expansion and contraction levels, maximum average expansion and contraction rate, and classes of expansion and contraction rate were determined per body part. The results of this study are as follows. First, 5 lower limb movements; F2, F5, F6, F7, F8, which caused significant changes in body surface lines were determined and illustrated in table 4. Second, the levels, rates, and classes of expansion and contraction rate per body part are illustrated in Tables 5 and 6. Body parts with the greatest maximum expansion rate were, in descending order: upper segment of center back leg line, upper segment of inner leg line, middle segment of center front leg line, posterior crotch length, anterior knee girth, anterior thigh girth, center back leg line, girth at crotch height, anterior midway thigh girth, hip girth, anterior crotch length, knee girth, waist girth, inner leg line, thigh girth, and crotch length. Those with the greatest maximum contraction rate were, in descending order: anterior crotch length, upper segment of center front leg line, lower segment of center back leg line, center front leg line, and posterior thigh girth. The maximum expansion rates and maximum contraction rates, which ranged from 2.05 to $35.95\%$ and from -0.20 to $-30.16\%$ respectively, were classified per body part into 4 ABCD classes. The body part with maximum expansion was the upper segment of the center back leg line at vertical body surface line, expanding by $35.95\%$ or 16.03cm in F5 flexion movement. In contrast, the body part with maximum contraction was the anterior crotch length at vertical body surface line, contracting by $-30.16\%$ or -10.54cm in F5 flexion movement. Both, however, were the body parts to expand or contract the most among all horizontal and vertical body surface lines.

• 한국임상수의학회지
• /
• 제33권5호
• /
• pp.278-285
• /
• 2016

Epidemiological studies have shown the association between transportation of live animals and the potential transmission of infectious disease between premises. This finding was also observed in the 2014-2015 foot-and-mouth disease (FMD) outbreak in Korea. Furthermore, slaughterhouses played a key role in the global spread of the FMD virus during the epidemic. In this context, in-depth knowledge of the structure of direct and indirect contact between slaughterhouses is paramount for understanding the dynamics of FMD transmission. But the social network structure of vehicle movements to slaughterhouses in Korea remains unclear. Hence, the aim of this study was to configure a social network topology of vehicle movements between slaughterhouses for a better understanding of how they are potentially connected, and to explore whether FMD outbreaks can be explained by the network properties constructed in the study. We created five monthly directed networks based on the frequency and chronology of on- and off-slaughterhouse vehicle movements. For the monthly network, a node represented a slaughterhouse, and an edge (or link) denoted vehicle movement between two slaughterhouses. Movement data were retrieved from the national Korean Animal Health Integrated System (KAHIS) database, which tracks the routes of individual vehicle movements using a global positioning system (GPS). Electronic registration of livestock movements has been a mandatory requirement since 2013 to ensure traceability of such movements. For each of the five studied networks, the network structures were characterized by small-world properties, with a short mean distance, a high clustering coefficient, and a short diameter. In addition, a strongly connected component was observed in each of the created networks, and this giant component included 94.4% to 100% of all network nodes. The characteristic hub-and-spoke type of structure was not identified. Such a structural vulnerability in the network suggests that once an infectious disease (such as FMD) is introduced in a random slaughterhouse within the cohesive component, it can spread to every other slaughterhouse in the component. From an epidemiological perspective, for disease management, empirically derived small-world networks could inform decision-makers on the higher potential for a large FMD epidemic within the livestock industry, and could provide insights into the rapid-transmission dynamics of the disease across long distances, despite a standstill of animal movements during the epidemic, given a single incursion of infection in any slaughterhouse in the country.

• 대한치과교정학회지
• /
• 제25권5호
• /
• pp.525-541
• /
• 1995

상악치열에서 제 1 소구치를 발거하고, 이 위치로 견치를 후방이동시킨 상태에서 retraction archwire를 사용하여 상악 4절치를 한 묶음으로 후방견인시켰을 때 초기에 나타나는 모든 힘 체계와 개개치아의 이동양상을 살펴보고 바람직하지 않은 치아이동을 감소시키기 위한 방안을 모색하고자 본 연구를 시행하였다. 먼저 유한요소법을 이용하여 상악 치아와 치근막의 해부학적 형태 및 생체적 특성을 컴퓨터로 재현시키고 모형화된 브라켓을 부착시킨 후, beam요소를 사용하여 5종의 retraction loop를 하나씩 부여한 다섯 가지의 탄선을 모형화하고, 브라켓과 탄선간에는 gap요소를 사용하여 모형화함으로써 전체 유한요소 모형을 완성하였다. loop의 형태, activation 의 양, gable bend와 torque의 조건에 따른 차이를 검토하기 위해, 각 조건을 변화시켜 loop를 activation시켰을 때 탄선이 발휘하는 힘과 모멘트, 치아이동의 변위를 3차원적으로 정량적 및 가시적으로 평가하고 비교, 분석한 결과 다음과 같은 결론을 얻었다. 1. tear-drop loop archwire사용시 각 치아의 근원심이동 및 설측이동이 발치공간 폐쇄에 도움이 되었으나, 바람직하지 못한 상하이동과 각 방향으로의 회전이동이 부가적으로 나타났다. 2.다섯 가지의 retraction archwire중 T-loop archwire에서 공간폐쇄에 도움이 되는 치아이동이 가장 작게 나타났으며, 각 방향으로의 회전이동 역시 가장 작게 나타났다. 3. tear-drop loop archwire에서 activation양을 증가시킴에 따라 공간폐쇄에 도움이 되는 치아이동이 점차 증가했으나, 바람직하지 못한 상하이동과 각 방향으로의 회전이동이 함께 증가했다. 4. tear-drop loop archwire에서 loop의 전후방에 gable bend부여시 전치에서 근원심방향의 치체이동에 도움이 되었으나, 모든 치아에서 상하이동과 각 방향으로의 회전이동이 함께 증가했다. 5. tear-drop loop aichwire의 절치부에 치근 설측 torque 부여시 이들 치아의 순설경사를 개선시키는 효과를 얻었으나, 그 반작용으로 견치 치관의 설측회전이 크게 증가했으며, 전치의 상하이동과 모든 치아에서 각 방향으로의 회전이동이 증가했다.

• International Journal of Quality Innovation
• /
• 제1권1호
• /
• pp.1-7
• /
• 2000

First of all, this paper deals with the past and present situations of quality management(QM) in Korea to show where the Korean industry stands in terms of QM movements. Next, this paper describes what the future desirable directions are for good and sound QM movements.

• 정보화정책
• /
• 제18권2호
• /
• pp.3-22
• /
• 2011

온라인 사회운동 연구에 있어 가장 근본적인 관심사는 인터넷의 확산이 기존 사회운동에 어떤 변화를 가져올 것인가라는 점이다. 연구자들의 관심은 우선 인터넷이 초래하는 운동의 주체와 전략에 대한 변화양상이다. 인터넷의 출현 이후, 지리적으로 산재된 개인들의 수평적 네트워크 혹은 개별 네트워크들이 연합한 네트워크가 운동의 주체로 활동하는 새로운 현상을 낳았다. 또한 일부 연구자들은 인터넷과 사회운동의 결합으로 인해 나타난 '새로운 집단행동 전술 및 전략'에 주목하였다. 온라인 사회운동의 증가는 자원동원, 집단정체성, 그리고 정치적 기회구조 등에 관한 기존 사회운동 이론에 있어도 새로운 해석을 요구하고 있다. 인터넷이 사회운동에 미친 영향, 그리고 그로 인한 변화양상에 대해서는 여전히 많은 논쟁이 진행 중이다. 초기 사이버 낙관론과 회의론 간의 논쟁은 물론이고, 이후 중범위적 시각에서 진행된 연구들 역시 인터넷의 영향력에 대해 서로 다른 입장을 보이고 있다. 이는 무엇보다 온라인 사회운동의 역사가 불과 10여년 밖에 되지 않아 충분한 사례연구와 데이터 축적이 이루어지지 않았기 때문이다. 향후에는 기술진화에 따른 온라인 사회운동의 변화와 비교연구에 더 많은 관심을 둘 필요가 있다. 또한 연구의 시각을 사회운동 내부에만 초점을 둘 것이 아니라 정치체제의 차원으로 확장해, 온라인 사회운동이 정치적 매개집단 그리고 나아가 민주주의 모델에 미치는 영향에 대해 분석할 필요가 있다.