• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.6
• /
• pp.891-898
• /
• 2012

The study for the passenger's comfortableness of vehicles and the arousal of car drivers has been done widely. On the other hand, there are few studies for the locomotive engineers. Human error means that the mistakes made by human, recently it receives attention in the field of safety engineering and human engineering. Comparing the operating condition of train with car, because of the simplification of the visual stimulus, the arousal level on the train goes down easily. The arousal level down makes judgement down, the accident risk from human error is getting bigger. In this study, we measured bio-signals(ECG, EDA, PPG, respiration and EEG) from 6 locomotive engineers to evaluate their arousal state while they operated the train. Also we recorded the 3 axes acceleration signal showing the vibration state of train. Also, the existence of tunnels were simultaneously measured. At the station section where the train speed goes down, the size of vector's sum decreases because of reduced vibration. Beta component in EEG tends to increase at the entering point of each station and tunnel. It is due to the arousal reaction and tension growth. The mean SCR(skin conductance response) was more increased in neutral section. As the button control movement (body movement) increases in the neutral section, it is appeared that SCR increase. RR interval tends to gradually increase during train operation for 1 hour 40 minutes. However, It tends to sharply decrease at the stop station because strong concentration needed to stop train on the exact point. The engineer's arousal reaction can be checked through analysing the bio-signal change during train operation. Therefore, if this analysing result is adopted to the sleepiness prevention caution system, it will be useful for the safety train operation.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.13-22
• /
• 2004

In case of the lateral movement accurring at soft ground where a row of piles are installed, the crown failure at external arch zone of soil arching is firstly developed, and the cap failure at wedge zone in front of piles is lastly developed. Therefore, the lateral earth pressure acting on a row of piles due to soil movement should be calculated in each condition of crown and cap failures around piles. A theoretical equation of crown failure can be proposed using a cylindrical cavity expansion theory. The theoretical equation of crown failure is mainly affected by two factors. One is related to soil properties such as internal friction angle, cohesion and horizontal pressure, and the other is related to pile factors such as diameter, installation interval. Meanwhile, the yield range of lateral earth pressure is established in the estimation of theoretical equation based on crown and cap failures around piles. The theoretical values based on crown and cap failures are compared with the experimental values. The experimental values are located in the range proposed by theoretical values. Thus, it is confirmed that the theoretical values proposed in the study are very reasonable.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.113-122
• /
• 2007

In this paper, we propose a multi-state based hybrid location update scheme, which integrates the time-based and the movement-based methods. In the proposed scheme, a mobile terminal updates its location after n cell boundary crossing and a time interval of T[sec]. We derive an analytical solution for the performance of the hybrid scheme with exponential cell resident time and evaluate it numerically with time-varying random walk mobility model, which we model as multi-states Markov chain. Furthermore, we also evaluate the scheme for arbitrary cell resident times by simulation. From the numerical analysis and the simulation results, we prove that the proposed scheme significantly outperforms the time-based and the movement-based methods, when implemented alone, more accurately adapting to the time-varying user mobility.

• Archives of Craniofacial Surgery
• /
• v.13 no.1
• /
• pp.22-28
• /
• 2012

Purpose: In accordance to an increased interest in facial appearance and the popularization of computed tomography scanning, the number of diagnosis and treatment of blowout fractures has been increased. The purpose of this article is to review pure blowout fracture surgery through transconjunctival incision focusing on complications and their management. Methods: In this retrospective study, 583 patients, who had been treated for pure blowout fracture through transconjunctival incision from 2000 to 2009, were evaluated. Their hospital records were reviewed according to their sex, age, fracture site, preoperative presentations, time interval between trauma and surgery, and postoperative complications. Results: According to postoperative follow-up results, there were early complications that included wound dehiscence and infection (0.2%), hematoma (insomuch as extraocular movement is limited) (0.7%), lacriminal duct injury (0.5%), and periorbital nerve injury (0.7%). In addition, there were late complications that lasted more than 6 months, that included persistent diplopia (1.7%), extraocular movement limitation (0.9%), enophthalmos (1.0%), periorbital sensation abnormalities (1.0%), and entropion (0.5%). Conclusion: We propose the following guidelines for prevention of postoperative complications: layer by layer closure; bleeding control with the epinephrine gauzes, Tachocomb, and Tisseel; conjunctival incision 2 to 3 mm away from punctum; avoidance of excessive traction; performing surgical decompression and high dose corticosteroid therapy upon confirmation of nerve injury; atraumatic dissection and insertion of Medpor Barrier implant after securing a clear view of posterior ledge; using Medpor block stacking technique and BioSorb FX screw fixation; performing a complete resection of the anterior ethmoidal nerve during medial wall dissection; and making an incision 2 to 3 mm below the tarsal plate.

• Korean Journal of Environment and Ecology
• /
• v.29 no.2
• /
• pp.192-199
• /
• 2015

This study was conducted to investigate the movement and home range of the red-tongued viper snake (Gloydius ussuriensis) from June 2006 to June 2009. This snake species inhabits an islet on Jeju Island, Gapado. A total of 132 individual snakes were marked during the study. Among the marked individuals, the number of snakes recaptured more than once was 22 (16.8 %) and the number of individuals recaptured more than twice was eight (6.1 %), indicating a relatively low recapture rate. The durations from capture to recapture varied from 1 to 710 days. However, the capture points were not much different, indicating that the moved distance of snakes and the interval between capture-recapture were not correlated. The home ranges of the Red-tongued viper snakes calculated from data of the snakes which were captured more than three times using the MCP(minimum convex polygon) method were $8{\sim}167m^2(64.0{\pm}57.0m^2)$, suggesting that this snake is relatively sedentary. Home range size differences between female ($Mean=62.0m^2$) and male ($Mean=66.0m^2$) snakes were not significant. In the red-tongued viper population of Gapado, there was no statistically significant relationship between body size and home range size although it was positively correlated (r=0.675). Our results provide valuable data to understand life patterns of the red-tongued viper snakes and will be useful when conducting further ecological studies on other snake species.

• PNF and Movement
• /
• v.7 no.3
• /
• pp.29-38
• /
• 2009

Purpose : The aim of this study is to examine the effect of the phenol compound-cold therapy plus exercise therapy on the carrageenan(CAR)-induced muscle pain. Method : Mice were injected 0.1ml of 2% CAR into the gastrocmemius(GAS) muscle for the induction of muscle pain. After 4 hours from the injection of CAR, the cold therapy with 1% syringic acid was done to GAS muscle. After 2 hours from cold therapy, the exercise therapy such as muscle stretching, climing- and declining-movements was performed three times interval of 10 minutes in each experimental group. After 4, 10 and 24 hours from CAR-induced muscle pain, the measurements of muscle diameter, paw withdrawal latency(PWL) and, tail flick latency(TFL) were carried out. Results : In this study, the thickness of GAS muscle in CAR-induced muscle pain significantly increased compared with control. While, the thickness of GAS muscle adopted cold syringic acid-therapy with exercise-therapy group was significantly decreased than that of CAR-induced muscle pain. In the measurements of PWL and TFL, cold syringic acid-therapy with exercise-therapy group was remarkably increased than CAR-induced muscle pain group in PWL and TFL. All measurements were showed significantly different between the treated-group and the treated-time. Conclusions : From these results, it is suggested that the cold syringic acid-therapy with exercise-therapy such as muscle stretching, climing- and declining-movement was effective in the prevention of CAR-induced muscle pain by the decrease of muscle thickness and the increase of PWL and TFL.

• Korean Journal of Materials Research
• /
• v.25 no.8
• /
• pp.403-409
• /
• 2015

Metastable phase characteristics of beta Ti alloys were investigated to consider the relationship of the microstructure and diffraction pattern in TEM. TEM analysis showed that the microstructure was mottled as a modulated structure, and the diffraction pattern was composed of spot streaks between the main spots of a stable beta phase with a specific lattice relationship. The modulated structure may be induced by short distance slip or atom movement during a very short interval of solution treated and quenched (STQ) materials. The athermal ${\omega}$ phase, which could be precipitated at low temperature aging, is also analysed by the metastable phase. The metastable phases including athermal ${\omega}$ phase had a common characteristic of hardened and brittle behavior because the dislocation slip was restricted by a super lattice effect due to short distance atom movement at the metastable state.

• Journal of Biosystems Engineering
• /
• v.9 no.2
• /
• pp.48-57
• /
• 1984

To analyze the grain transport velocity, which is valuable for optimizing the separation losses, an oscillating appratus for sieve was designed. The grain transport velocity was measured in each combination of three amplitude levels, three rpm levels and four projection angle levels. To analyze the grain transport velocity theortically, two computer programs were developed. And the results from experiment and theoretical analysis were compared. 1. The grain transport velocity was increased with the projection angle of oscillating sieve. Especially when the projection angle is higher than $45^{\circ}$ the grain transport velocity on the flat-plate was not increased but on the racked surface was increased persistently. 2. The grain transport velocity was increased linearly with the frequency of oscillating motion. The speed of driving link must be higher than 350 rpm at 24mm amplitude, 250 rpm at 36 mm amplitude to transport the grain efficiently. 3. The grain transport velocity was increased with the amplitude of oscillating motion. But if the amplitude was smaller than interval of racks, the grain on the racked surface was not transported, even though the projection angle or the speed of revolutionary link was increased. 4. The transport characteristics of a grain varied with the amplitude and projection angle. Especially in the range of 1.5 < K < 2.3 at $45^{\circ}$ projection angle the transportation of grain was successful and the grain motion consisted of sliding movement (forward, backward) and jumping movement, which is considered recommendable for separating process of a combine sieve. 5. The results from theoretical analysis were approximately in accord with that from experiment.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.1-6
• /
• 2014

Color image processing based on smoke detection is suitable detecting target to early detection of fire smoke. A method for detecting the smoke is processed in the pre-processing movement and color. And Next, characteristics of smoke such as diffusion, texture, shape, and directionality are used to post-processing. In this paper, propose the detection method of density distribution characteristic in characteristics of smoke. the generate a candidate regions by color thresholding image in Detecting the movement of smoke to the 10Frame interval and accumulated while 1second image. then check whether the pattern of the smoke by candidate regions to applying OBTP(Object Block Ternary Pattern). every processing is Block-based processing, moving detection is decided the candidate regions of the moving object by applying an adaptive threshold to frame difference image. The decided candidate region accumulates one second and apply the threshold condition of the smoke color. make the ternary pattern compare the center block value with block value of 16 position in each candidate region of the smoke, and determine the smoke by compare the candidate ternary pattern and smoke ternary pattern.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.4
• /
• pp.334-341
• /
• 2022

Objectives: This study was conducted to develop the Mobility to Participation Assessment Scale for Stroke (MPASS) and assess its content validity, internal consistency, inter-rater and intra-rater reliability, and convergent validity in people with stroke living in the community. Methods: The MPASS was developed using published data on mobility-related activity and participation timing in elderly individuals, and then reviewed by community physical therapists. Content validity was established by reaching a consensus of experienced physical therapists in a focus group. The MPASS was scored for 32 participants with stroke (mean age 61.75±4.92 years) by 3 individual testers. Reliability was examined using the intraclass correlation coefficient (ICC), internal consistency using the Cronbach alpha coefficient (α), and convergent validity using the Pearson correlation coefficient (r) to compare the MPASS to the Modified Rivermead Mobility Index as a referent test of mobility. Results: The MPASS consists of 8 items, and its scoring system provides information on the ability of people with stroke to reach a movement level enabling them to live in society, including interactions with other people and safe living in the community. The interrater and intra-rater reliability were excellent (ICC, 0.948; 95% confidence interval [CI], 0.893 to 0.982 and ICC, 0.967; 95% CI, 0.933 to 0.989, respectively). Internal consistency was good (α=0.877). The convergent validity was moderate (r=0.646; p<0.001). Conclusions: The newly developed MPASS showed acceptable construct validity and high reliability. The MPASS is suitable for use in people with stroke, especially those who have been discharged and live in the community with the ability to initiate sitting.