• 한국실내디자인학회논문집
• /
• 제40호
• /
• pp.86-93
• /
• 2003

Korean traditionally prefer a house with a southern exposure to other styles. Moreover, pretty part of dwelling style in Korea is apartment building. But generally, there are much more north oriented rooms than opposite one in apartment. Generally, most Korean tends to consider the direction of the room as an important factor to decide the arrangement of their furniture. Also, the location of window, door, bed, and closet can affect on the decision-making process of furniture layout. So, the closet position should be determined by not only window direction and door position, but also the furniture arrangement preference of residents. After considering the window and door position, there are 16 alternatives in a room. (Multiplied 4 window directions by 4 door positions under the assumption that the window and the door cannot be on the same side of the wall.) Also, this study analyzed each room style ratio considering the symmetry of each plan by comparing the apartment building plan. This paper studied the bedroom style by analyzing the 180 apartment building plans and survey of furniture layout; the furniture in this study represents bed and desk those are mainly laid in Korean bedroom. Finally, this paper suggested the methodology to find optimal alternatives of furniture and closet layout for high-rise apartment residents, based on the door and window position, and the furniture layout preference of residents.

• 한국기계가공학회지
• /
• 제15권3호
• /
• pp.8-14
• /
• 2016

Medical bed head consoles (BHC) are generally used to increase the efficiency of medical equipment and speed the medical treatment response time. The BHC design has been consistently improved including a movable shelf unit that is embedded to mount stably medical instruments on the lower part of the main console. The cost of a BHC can be reduced through design optimization to limit the overall weight. However, as the size of a head console might decrease due to design optimization, the BHC deflection could be increased. In this study, multi-objective optimal design was adopted to consider this BHC design problem. In order to reduce the cost of optimization planning, an approximate model was applied for the design optimization. In the context of approximate optimization, we used the response surface method and non-dominant sorting genetic algorithm developed from various fields. Multi-objective optimal solutions were also compared with a single objective optimal design.

• 수산해양기술연구
• /
• 제31권1호
• /
• pp.93-106
• /
• 1995

This paper describes the development of moving watched chamber. For the most part, the watched chamber have been located in the inner-bay. But, there are many problems of sea-water pollution. Therefore, the watched chamber must be relocated to undeveloped coastal area. The watched chamber which is located in the bay has a bit of damage by bad weather. But, the moving watched chamber would be exposed to bad water. It is desirable to improve the system of chamber. If we make a good design of the moving watched chamber with studying of waves and hydrodynamics, it would be possible to culture fish at the coastal sea area. When a fixed system is changed into a movable one, we can obtain the following advantages: 1. The possibility of diminishing the sea water pollution, easying the overcrowded state in a inner-bay farm, and relieved of limitation caused by bad conditions such as waves, red tides and terrains. 2. It would be easy not only to move the watched chamber system in accordance with weather conditions or occurrence of red tides, but also to select good sites for watched chamber fishes. 3. Transportation and good supervision with the automated design system can results with the effectiveness which increases the amount of aquatic products.

• 한국정보통신학회논문지
• /
• 제5권7호
• /
• pp.1280-1286
• /
• 2001

본 연구에서는 작업자의 일정한 동작을 보다 효율적으로 인식할 수 있는 시스템을 제안하고자 한다. 먼저, 작업자의 동작을 촬영한 동영상에서 연속된 프레임간의 차를 기반으로, 고정된 배경과 움직이는 대상을 분리한다. 다음으로, 에지 검출을 이용하여 동작의 중심 위치를 추정하여 연속적으로 움직이는 동작을 인식할 수 있도록 하였다. 본 연구에서 설계한 동작 인식시스템은 기존의 산업헌장에서 적용되고 있는 동작인식 시스템의 문제점을 보완하기 위하여 작업자의 동작을 고정된 CCTV로 촬영한 영상을 인식의 대상으로 취함으로써 동작 정보를 얻기 위한 각종 장비들이 최소화되었다. 또한, 작업자의 신체 부분별 특성을 추출하기 위한 계산 작업에 소요되는 시간을 줄이기 위하여 프레임간의 차연산과 에지검출을 통한 동작인식을 실시하여 인식에 필요한 작업시간을 단축하여, 효율적이면서 비용이 저렴한 동작 인식시스템을 설계하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2000년도 학술대회지
• /
• pp.255-266
• /
• 2000

Since 1993, Seohae grand bridge has been continued construction for 7 years and will be completed late this year. The bridge is a part of west sea castal highway and consists of 3 types of bridge including precast segmental method, free cantilever method and cable stayed bridge. A cable stayed bridge is the core of this bridge and it consists of 5 span, symetrical cable-stayed bridge with a total length of 990 m. The main span between two H-shaped pylons extending approximately 180 M above massive foundation of a cable stayed bridge is 470 m long and an approach span of that is 260 m long respectively. The circular cofferdam with 16 ea of 25 m diameter flat type sheet pile had been applied to construct foundation. The slipform method had been applied for forming of con'c of two H-shaped pylons with 3 cross beams respectively which is varied horizontally and vertically. The deck has been erected with balanced cantilever method using movable derrick crane. The stay cables is a bundle of parallel individually protected, 7 wire high tensile strands. The strands is hot deep galvanized and sheathed with a tight high density polyethylene coating. A petroleum wax fills all the inter-wire voids. The bundle of strands to prevent from deterioration due to the ambient problem covered with high density polyethylene pipe. The Isotension method has been applied for the stressing of cable strands to ensure uniformity of force in all the strands of a syay and such works has been performed on the stay specially provided in the pylon.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.35-36
• /
• 2005

An ejector driven by a liquid is a fluid transfer equipment to be used under a poor suction condition, which means that there exists a possibility to occur a cavitation. It is a highly reliable device because it has no movable part in it, that is only a passive equipment. The ejector is an inevitably necessary one to overcome a poor pumping condition and to mix uniformly two fluids, however it has a low efficiency since it requires a pump for its operation. This study is for the development of a new-type liquid ejector with the application of a nozzle shape alteration, which maximize the suction performance of it. which provides the increased competition with the domestic industries. Also, the increased performance opens a new manufacturing method to use a commercial pipes for the production of an ejector, which is based on a trivial loss of a performance. However, this minor loss can be sufficiently compensated by the increased performance of a new-type ejector. Therefore, the developed ejector by this study can considerably reduce the manufacturing time and cost while its performance is largely increased.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.421-436
• /
• 2017

This paper presents the main outcomes of the preliminary development of the Anuloid, an innovative disk-shaped VTOL aircraft. The Anuloid has three main features: lift is provided by a ducted fan powered by a turboshaft; control capabilities and anti-torque are due to a system of fixed and movable surfaces that are placed in the circular internal duct and the bottom portion of the aircraft; the Coanda effect is exploited to enable the control capabilities of such surfaces. In this paper, results from flight mechanics are presented. The vertical flight dynamics were found to be desirable. In contrast, the horizontal flight dynamics of the aircraft shows both dynamic instability, and more importantly, insufficient pitch and roll control authority. Some recommendations and guidelines are then given aimed at the alleviation of such problems.

• Advances in aircraft and spacecraft science
• /
• 제4권4호
• /
• pp.401-419
• /
• 2017

This paper presents the main outcomes of the preliminary development of the Anuloid, an innovative disk-shaped VTOL aircraft. The Anuloid has three main features: lift is provided by a ducted fan powered by a turboshaft; control capabilities and anti-torque are due to a system of fixed and movable surfaces that are placed in the circular internal duct and the bottom portion of the aircraft; the Coanda effect is exploited to enable the control capabilities of such surfaces. In this paper, results from CFD analyses and wind tunnel tests are presented. Horizontal and vertical flights were considered, including accelerated flight. Particular attention was paid to the experimental analysis of the Coanda effect via a reduced scale 3D printed model. The results suggest that the Coanda effect is continuously present at the lower surface of the Anuloid and may be exploited for the control of the aircraft. Also, very complex 3D flows may develop around the aircraft.

• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.111-117
• /
• 1997

The sudden-stop apparatus is made to measure the residual stress of the infinitesimal area at the turning work surface by using the X-ray stress apparatus. This study is trued to make the cutting work the instantaneous stopping state in the normal working state. The behaviour of work material near the tool is estimated. The estimation method is that the distribution of residual stress can be also measured. The object is to clarify and control the mechanism to leave the adequate stress of the finishing surface. It's beginning is due to observe the occurrence state of the residual stress at the cutting work. The result obtained by this study is as follows. The chips are not separated from the work materials at all the cutting experiments of built-up edges or the shearing areas etc. which can be precisely observed by using the sudden-stop apparatus. The strain of movable system which can be seen at the part of working layer means the size of strain. This experiment proves that the working strain should be lessened to make the size of strain control the residual stress happened at the cutting surface.

• The Journal of the Acoustical Society of Korea
• /
• 제28권1E호
• /
• pp.23-28
• /
• 2009

At the crossings of turnout systems, noise is generated by the impact of train on the connection points. However, rapid movement changes between rail and wheels on connection point are inevitable on existing turnout section which may cause safety concern as well as noise problem caused by repeated impact load by passing train. And given the turnout is a complicated system which combines various functions such as rolling stock, trackbed, signaling, communication and electrical system, it's very difficult to expect to improve the overall performance of the turnout in such a way of optimizing only particular part of such integrated system. Since the turnout is the only movable section among the integrated parts and has complicated structure that inevitably brings about quick and sudden movement, safety has been still put on the top of the list. This study was aimed at comparing and analyzing the noise data obtained around the turnout of existing railway, by categorizing them into tilting train, high speed train and traditional train, and by distance, speed and type of turnout. And based on the data measured, the forecast of noise level when tilting train accelerates around a turnout was conducted in the study.