• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.731-737
• /
• 2005

This paper evaluates dynamic performance of a cab over type large-sized truck for estimating the effects of frame's torsional characteristics using a computer model. The computer model considers two mounting methods of frame, flange mounting and web mounting. Frame is modeled by finite elements using MSC/NASTRAN In order to consider the flexibility of frame. The torsional test of the frame is conducted In order to validate the modeled finite element model. A load cell is used to measure the load applied to the frame. An angle sensor is used to measure the torsional angle. An actuator is used to apply a load to the frame. To estimate the effects of frame's torsional characteristics on dynamic performance, simulations are performed with the flange mounting and web mounting frame. Simulation results show that the web mounting frame's variations of roll angle, lateral acceleration, and yaw rate are larger than the flange mounting frame's variations, especially in the high velocity and the second part of the double lane course.

• 한국의학물리학회지:의학물리
• /
• 제13권1호
• /
• pp.9-14
• /
• 2002

두부 프레임을 지지하는 방식으로 pedestal mounting system과 couch mounting system의 장점을 수용한, 새로운 형태의 분할 정위방사선 치료 시스템을 개발하였다. 두부 고정을 위한 프레임은 두랄루민으로 제작하였고, 카우치에 부착되게 하였다. 프레임 내에서 환자의 두부를 고정하기 위해 치아 고정장치와 3.2 mm 열프라스틱으로 전두부와 후두부에 마스크를 제작할 수 있다. 정위 좌표 구현을 위한 전산화 단층촬영 localizer는 각 병원에서 많이 사용하고 있는 Brown-Roberts-Walls(B.R.W) 시스템을 사용할 수 있게 하여, 개발된 시스템의 신뢰성을 높이고 제작 단가도 낮추고자 하였다. 프레임 mounting system은 pedestal mounting system을 수정, 보완한 형태로 개발하였다. 시스템은 카우치를 지지하는 바닥 면에 고정되어 카우치에 부착된 프레임과 결합할 수 있고, 시스템과 카우치의 잠금 장치를 푼 채 자유롭게 x, y축으로 유동할 수 있다. 프레임 mounting system의 중심축은 상, 하 방향으로 이동 가능한 포인터 형태로 제작하여, 치료기의 구동 정확성을 검증하는 정도 관리에 응용 가능하다. 개발된 시스템의 재현성과 정확도 검증을 위해 아크릴 팬텀과 포인터를 제작하였고, 전산화 단층촬영 영상에서 획득한 팬텀 내 목표점의 정위 좌표를 dial-gauge와 E.C.L 필름으로 검증하였다. 실험의 결과 x축 방향의 재현성 오차는 0.71$\pm$0.19 mm, y축 방향은 0.45$\pm$0.15 mm, z축 방향 재현성 오차는 0.63$\pm$0.18 mm로 나타났고, 최대 1.3 mm 이내의 우수한 재현성을 보였다. 연구 결과로 개발된 분할 정위방사선 치료 시스템은 재현성이 우수하고, 전체 중량이 가벼워 사용하기 쉽게 제작되었다. 특히 수정된 pedestal frame mounting system으로 설계되어 후두부 방사선 조사가 가능한 장점이 있다.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.104-109
• /
• 1998

This document is a experimental study on fatigue life of brace mounting weld joint. A brace is used to put sub-frame together on the main frame with high strength bolts. It has low fatigue life so a patch is in need for improving a fatigue characteristics of welded joint in brace mounting This paper presents the most pertinent patch size for truck. For this, a critical stress is computed at the point of fatigue crack occurred on truck frame by finite Element Analysis. Using by this critical stress. Designers are able to determin whether fatigue crack is occurred and are able to select a pertinent patch type. And then, with a selected patch type, structural joint stiffness was estimated to compare to the conventional and other patch type or brace mounting Finally, fatigue test were performed to prove a suitability of selected prototype compare with the conventional and other patch type or brace mounting.

• 한국지진공학회논문집
• /
• 제24권2호
• /
• pp.95-102
• /
• 2020

Electrical instruments and devices contained in cabinets for controlling nuclear power plants require seismic qualification; likewise, in-cabinet response spectrum (ICRS) is necessary. Gupta et al. (1999) suggested the Ritz method, where rocking, frame bending, and plate bending behaviors of cabinets are considered, as a method for determining ICRS. This research proposes a method to determine the rocking stiffness of cabinets, which represents its rocking behavior. The cabinet is fixed on mounting frames and is connected to the base concrete by anchors. When horizontal excitation is applied to the cabinet, the mounting frames at anchors are locally deformed, the mounting frames are bent, and then rocking in the cabinet becomes evident. A method to determine equivalent vertical spring stiffness representing the local deformation of the mounting frames at anchors is then proposed. Subsequently, the rocking stiffness of this mounting frame is calculated upon assumption of the mounting frame as an indeterminate beam.

• 한국자동차공학회논문집
• /
• 제19권4호
• /
• pp.47-53
• /
• 2011

Firstly, FEM model for the body frame of a fuel cell vehicle was built up and design optimization results based on different schemes were exhibited. One scheme was to minimize weight while maintaining the normal mode frequencies and the other was to increase the frequencies without weight change. Next, for a rear frame model, shape parameter study on collapse characteristics such as peak resistance load and absorbed energy was carried out. Also, the stiffness of frame mounting brackets was predicted using inertance calculation and the durability of those mounting brackets for vehicle system loads was evaluated. Finally, for a representative mounting model, the influence on durability due to thickness change was analyzed.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.636-643
• /
• 2009

NHC means that the velocity of the vehicle in the plane perpendicular to the forward direction is almost zero. The main error source of NHC is the mounting misalignment which is the difference between the body frame of a land vehicle and the sensor frame of an inertial measurement unit. This paper suggests new NHC algorithm that can reduce position errors by real-time estimation of mounting misalignment. Then NHC/ZUPT integrated land navigation system is designed and its performances are analyzed by simulations with van test data. Simulation results show that the proposed NHC/ZUPT land navigation system improves navigation accuracy regardless of misalignment angle and is very useful when SDINS operates stand-alone for land vehicle navigation with large mounting misalignment.

• 한국잠사곤충학회지
• /
• 제33권2호
• /
• pp.97-99
• /
• 1991

다회육시 회전섶을 소독할 여유없이 재사용하므로서 누에병발생의 가장 큰 오염원이 될 가능성이 크므로 이를 상족중에 포르말린으로 훈증처리하여 소독효과 및 사질에 미치는 영향에 대해 조사 검토하였다. 소독후 회전섶 먼지를 채취하여 도말급상법으로 소독효과를 검토한 결과 훈증소독구에서 첨식 6일째까지 82%의 병잠이 발생하여 실용적 소독효과가 거의 없음을 보였고 또한 훈증처리한 구의 고치 실풀림새율이 41%로 극히 불량하여 사질에도 악영향을 미치는 것으로 나타나 상족중 포르말린 훈증소독방법은 전혀 의미가 없는 것으로 판명되었다.

• Journal of Welding and Joining
• /
• 제16권3호
• /
• pp.141-147
• /
• 1998

Design sensitivity analysis of a vehicle system is an essential tool for design optimization and trade-off studies. Most optimization algorithms require the derivatives of cost and constraint function with respect to design in order to calculate the next improved design. This paper presents an efficient algorithm application for the design sensitivity analysis, using the direct differentiation method. A mounting area of suspension that welded on chassis frame is analyzed to show the validity and the efficiency of the proposed method. A mounting area of suspension that welded on chassis frame is analyzed to show the validity and the efficiency of the proposed method.

• 한국자동차공학회논문집
• /
• 제2권2호
• /
• pp.24-32
• /
• 1994

This paper is the experimental study on the vibration reduction of the 4WD vehicle through the change of the engine mounting conditions.(4 stroke diesel engine) The engine mounting conditions are changed to reduce the transmitted vibrations of the engine to the frame at the idle speed. Under the assumption that the Powertrain(Engine Transmission and Transfer Case) is a rigid body, the inertia properties of the powertrain are obtained by experimental modal analysis. And then the changed mounting conditions are studied by the decoupled vibration theory and analytical model of six degree of freedom. Though the mounting conditions are changed to improve the vibration isolation at idle speed, the vibration and the interior noise of the vehicle are reduced significantly at driving speed as well as idle speed. From the indirect endurance test of the front engine mounts, the changed mounting conditions are desirable to endurance as well as vibration reduction of the 4WD vehicle.

• 한국소음진동공학회논문집
• /
• 제15권12호
• /
• pp.1332-1339
• /
• 2005

The vibration of Powertrain are one of the import design characteristics of a vehicle. Powertrain is mostly mounted to the front subframe and powertrain mounting has an important role in determining the vehicle vibration characteristics. In this paper, the accuracy of the vibration analysis for the front subframe is discussed. The dynamic characteristic of subframe are measured from vehicle test and the finite element model updating are performed that natural frequency, mass and MAC of the experimental and theoretical modal analysis are compared. The subframe mounting stiffness are obtained the iteration method based on the vibration of subframe from vehicle test. Finally, the result of dynamic analysis which is operated dynamic load is compared with experimental one of vehicle test.