• 한국해양공학회지
• /
• 제18권1호
• /
• pp.16-21
• /
• 2004

In general, core materials of rubble mound breakwater are used at a restricted range of 0.015㎥～0.03㎥. However, it is not satisfied with the standard design in over fifty percent of the cases. In this study, model tests and numerical analysis are employed to examine the range of core material that has no problem with capacity maintenance and stability of rubble mound breakwater. Model tests measure the porosities that are mixed in various ratios, to classify core materials by three parameters. The slope stability of rubble mound breakwater is investigated, using numerical analysis, with a friction angle and a unit weight. The change of unit weight, which is followed by the mixed rate of size core material, has no large affect on slope stability, and there is no problem with ensuring slope stability of the rubble mound breakwater.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.303-308
• /
• 2004

The failure at the head section of rubble mound breakwaters is more important than other failure modes. because this initial failures will occur the failure of the trunk section and lead to the instability of the structure. The three-dimensional failure modes are discussed using the experimental data with multi-directional waves considering the failure modes. It was occurred by the topographical characteristics around the head of rubble mound breakwater. The spacial characteristics of failure mode around the rubble-mound structures can be summarized as follows: 1) It was clarified that the failure modes at the round head of a detached breakwater are classified as failure by plunging breaker on the slope, failure by direct incident wave force and failure at the rubble mound breakwaters. 2) The failure mode was found in the lower wave height than the design wave by the breaker depth effects and topography around structures. It is clarified that the structure was monitored safely designed for the design wave but the failure was occurred by the reason of breaker waves.

• 산업기술연구
• /
• 제21권B호
• /
• pp.163-174
• /
• 2001

A dynamic reliability model for analyzing the stability of armor units on rubble-mound breakwater is mathematically developed by using Hudson's formula and definition of single-failure mode. The probability density functions of resistance and loading functions are defined properly, the related parameters to those probability density functions are also estimated straightforwardly by the first-order analysis. It is found that probabilities of failure for the stability of armor units on rubble-mound breakwater are continuously increased as the service periods are elapsed, because of the occurrence of repeated loading of random magnitude by which the resistance may be deteriorated. In particular, the factor of safety is incorporated into the dynamic reliability model in order to evaluate the probability of failure as a function of factor of safety. It may thus be possible to take some informations for optimal design as well as managements and repairs of armor units on rubble-mound breakwater from the dynamic reliability analyses.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.23-31
• /
• 2003

As there are so many uncertainties associated with using the determinism analysis method in the design of rubble mound breakwater, it is impossible for a designed construction to provide ultimate stability. First of all, due to the uncertainty of Load and Resistance, a safety level concerning the destruction mode of construction must be given. Then, the optimization design should be processed. After all, we can say that it is a more reasonable design method than the design used by the stability rate. In this study, an established design process is accomplished using Hudson's equation and an economic analysis with the breakwater's section is also conducted. Hudson's equation is compared to Van der Meer's equation. These results are utilized to drop a damage rate, increase the stability of construction, and determine the optimization section of the breakwater.

• Ocean Systems Engineering
• /
• 제3권1호
• /
• pp.55-70
• /
• 2013

A composite breakwater with an upper horizontal porous plate and a lower rubble mound is proposed and studied in this work. By means of matched eigenfunction expansions, a semi-analytical solution is developed for analyzing the hydrodynamic performance of the breakwater. The semi-analytical solution is verified by known solutions for special cases and an independently developed multi-domain boundary element method solution. Numerical examples are given to examine the reflection, transmission and energy loss coefficients of the breakwater and the wave force acting on the horizontal porous plate. Some useful results are presented for engineering applications.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.217-220
• /
• 2008

The reflection coefficients and the run-up heights affected by submerged structures are studied by using the numerical and the laboratory experimental methods. The three-point method is chosen to calculate the reflection coefficients in both the experimental and the numerical methods. The results of numerical simulations are shown a good agreement with laboratory measurements. The reflection coefficients increase and the run-up heights decrease when the rubble mound breakwater is defended by low-crested structures.

• 한국지반공학회논문집
• /
• 제27권12호
• /
• pp.85-96
• /
• 2011

방파제는 태풍 또는 바람 등으로 발생된 파랑으로부터 해안, 항만시설을 보호하고 항내 수역의 정온도 확보를 위한 중요한 구조물이다. 국내에 가장 일반적인 방파제중 하나인 경사식 방파제를 본 연구과제로 선정하였다. 경사식 방파제는 정적조건만을 고려하여 설계되었다. 최근에 파랑작용에 따른 동적파압도 설계에서 고려하고 있다. 하지만 동적파압을 경사식 방파제의 경사면에만 국한하여 적용시키고, 적용된 파압 역시 등가파압으로 가정하였다. 이것은 방파제에 실제로 작용하는 파압분포와 다르다. 따라서 본 연구에서는 방파제경사면에 작용하는 파압을 등가파압이 아닌 실제 작용하는 시간이력파압을 적용하고 파압을 경사방파제의 경사면뿐만 아니라 해저지반에 추가적으로 고려하였다. 이를 반영한 수치해석을 통해 산출된 최대침하량이 현재의 설계법에 의해 산출된 최대침하량과 비교 시 상당한 차이가 있는 것으로 나타났다.

• 한국해양공학회지
• /
• 제17권6호
• /
• pp.16-22
• /
• 2003

In this paper, the method of determining the economically-optimal design section of rubble mound breakwater, using ADS program, was studied to supplement the deterministic approach. First of all, the design waves are computed, according to the return periods, using the Weibull distribution from the data of waves at the location of the breakwater. In order to take an optimal section, according to the return periods, the ADS program was used. The restriction conditions and objective functions are decided from the references of the specifications and standard manuals for Coastal and Harbor Construction Work. Results from this study support the ADS program as an appropriate method for determining the economically-optimal section of rubble mound breakwater, comparing the construction costs and the initial and damage repair costs for its life time.

• 한국항만학회지
• /
• 제8권2호
• /
• pp.57-65
• /
• 1994

A theoretical formulation is performed to investigate the wave reflection and transmission ratios by a submerged multi-layered rubble-mound breakwater. This theory, which is based on the linear boundary integral method, can be extended to the multi-layered breakwater with arbitrary cross section. In the theoretical analysis evanescent mode wave is not considered, since fictitious open boundaries are put on the places far from the structure. Therefore the mathematical presentation may be simpler, and computational time shorter. The validity of obtained numerical results is demonstrated by comparing with ones of impermeable and permeable breakwaters. Comparison shows resonable agreement. On the basis of these verifications this theory is applied to the one and two-layered submerged rubble-mound breakwater with trapezoidal type.

• 한국해안·해양공학회논문집
• /
• 제20권4호
• /
• pp.413-420
• /
• 2008

파랑하중은 연약지반을 굴착 치환시킨 후에 축조된 사석경사식 방파제의 안정에 직접적인 영향을 주는 요소이다. 특히 일부 침하를 허용하는 굴착치환 사석경사 방파제에서 침하를 유발하는 주요인으로 지목되었으나, 설계 시 파랑하중에 의한 방파제의 침하에 대한 영향을 검토하여 반영하는 사례가 전무한 상태이다. 따라서 본 연구에서는 파랑하중에 의한 방파제 침하의 영향을 설계에 직접 반영할 수 있도록 수치모형실험을 실시하여 방파제 침하량을 계산한 후 현장계측자료와 비교하였다. 계산값과 실측값은 양호한 일치를 보이는 것으로 나타났다.