• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.477-478
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.95-96
• /
• 2006

This study examined the effects of the tempering temperatures($360-420^{\circ}C$) on the mechanical properties of the carbon tool steel (SK4M) for flat spring. Hardness test, tensile test and fatigue test were performed at room temperature($20^{\circ}C$). The tensile strength and yield strength of $390^{\circ}C\;and\;420^{\circ}C$ tempered SK5M were 0.93-0.97 times and 0.81-0.87 times those of $360^{\circ}C$ tempered SK5M, respectively. The fatigue limit of $360-420^{\circ}C$ tempered SK5M were 35-40% of tensile strength of $360-420^{\circ}C$ tempered SK5M, respectively.

• Journal of the Korean Society of Safety
• /
• v.7 no.1
• /
• pp.39-45
• /
• 1992

The impulsive stress and wave propagation of a glass/epoxy laminate subjected to the transverse low-velocity impact of a steel ball are investigated theoretically and experimentally. A plate finite element model based on Whitney and Pagano's theory In consunchon with experimental contact laws is used for the theoretical investigation. The specimens fo, statical indentation and impact test we composed of ［0/45/0/-45/0］$_{2s}$ and ［90/45/90/-45/90］$_{2s}$ stacking sequences and have clamped-simply supported boundary conditions. Finally, these two results are compared and then the impulsive stress and wave propagation characteristics of this laminated composite are studied.ied.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.531-539
• /
• 2017

This paper deals with the development of bonded joints for fibre reinforced plastic (FRP) hull structures using moulding-in concept. Focus is placed on bonded in-plane connections between two adjacent panels that could form the boundaries of hull structural module. Traditional construction in FRP hull structures requires the construction of a mould, usually from steel or aluminium. In this construction the FRP materials are laid in the mould, and resin is saturated, and then the structural member is cured. This is expensive since it involves the fabrication of metal hull mould for every different hull type, which is sacrificed after the production of the FRP ship. One way of encouraging greater use of FRP in ship construction is to investigate the possible construction of FRP hull structures in a similar manner to metallic ships, that is in terms of blocks or modules. Such a manner of construction would eliminate the need for expensive hull moulds permitting greater flexibility in the construction of FRP ships. The main issue then would be the design and construction of adequate bonded connections between adjacent panels. To fulfill this object, the simplified and automated way of manufacturing joint edge shapes for bonded joints is developed, and their structural assessment is performed in both experimentally and numerically.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.6
• /
• pp.455-464
• /
• 2005

This paper discusses the methods of computing tool-paths for machining free-form surfaces on 3-axis CNC machines in die and mould making. In computational view this paper describes the characteristics and issues of the geometric information and the shape, which make computing tool-paths difficult. Important points that should be considered in devising a computing method are also discussed. A newly implemented method is explained and compared with an old method for a commercial CAM system. The implemented method is used in a commercial CAM system and the computing time for an example is presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.127-129
• /
• 2003

Recently. the efforts for the development of DVD concentrate on the high storage and multi-media. DVD has been manufactured by assembling many parts and it causes the vibration and noise. In this paper, one body rotor is proposed, which can make the nose and vibration be decreased. The injection mould for DVD rotor is designed by finite element analysis and the rotor is manufactured in the mould. The magnetic flux density is measured on the surface and it is compared with the design criteria.

• Elastomers and Composites
• /
• v.38 no.4
• /
• pp.295-302
• /
• 2003

The amount of shrinkage of injection molded parts is different from operational conditions of injection molding such as injection temperature, injection pressure and mold temperature, and mold design such as gate size. It also varies depending on the presence of crystalline structure in resins. In this study, part shrinkage was investigated for various operational conditions and resins. Poly(butylene terephthalate) (PBT) for crystalline polymer, and polycarbonate (PC) and poly(methyl methacrylate) (PMMA) for amorphous polymers were used. Crystall me polymer showed higher part shrinkage by about three times than that of amorphous polymers. Part shrinkage increased as melt and molt temperatures increased, and injection pressure decreased. Part shrinkage decreased as gate size increased since the pressure delivery is mush easier for larger gate sizes. Part shrinkage at the position close to the gate was larger than that or the position far from gate. This phenomenon might be occur by difference of residual stress.

• Korean Institute of Interior Design Journal
• /
• no.10
• /
• pp.28-33
• /
• 1997

The primary purpose of this thesis is to offer users for the better surroundings in planning subway wall design through analyzing the Wall Environmental Design at Subway Statiov. As the urban circumstances were developed by the economic growth, the new city plan, re-development evoked the radical changes in the urban circumstances. In processing the industrialization and urban surroundings. This range has enlargened and provided the localism, the function, the purpose with the visual informations. The method of this paper was the spot survey simultaneously the photographing of the mould's size. theme, colour, material, compossitiov. In conclusion, concerning about the artificial and subterranean space, the Wall Environmental Design at Subway Station needs more practial approach in the using the space.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.6
• /
• pp.16-22
• /
• 2003

In this paper, the method of determining the economically-optimal design section of rubble mound breakwater, using ADS program, was studied to supplement the deterministic approach. First of all, the design waves are computed, according to the return periods, using the Weibull distribution from the data of waves at the location of the breakwater. In order to take an optimal section, according to the return periods, the ADS program was used. The restriction conditions and objective functions are decided from the references of the specifications and standard manuals for Coastal and Harbor Construction Work. Results from this study support the ADS program as an appropriate method for determining the economically-optimal section of rubble mound breakwater, comparing the construction costs and the initial and damage repair costs for its life time.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.977-980
• /
• 2011

본 논문에서는 자전거용 무단변속기를 개발하기 위해서 편심캠 방식을 적용한 무단변속기를 설계하였고 최적 설계 검증을 위해 3차원 유한요소해석을 활용하여 정적 및 동적해석을 수행하여 최적의 변속을 가지도록 설계에 반영하였다. 이러한 결과를 활용하여 새로운 변속구조를 가지는 무단변속기를 설계하였고 구조적으로 안정성을 평가 분석하였다.