• Journal of Auto-vehicle Safety Association
• /
• v.8 no.3
• /
• pp.22-27
• /
• 2016

As a preliminary research to provide amendment for the engine performance test regulation of two-wheeled vehicles, the engine performance data are investigated in terms of maximum torque, rated power, and engine speed of motorcycles on sales in Korean market. Based on the engine performance database officially published to consumers, some forecasted problems are discussed when the maximum torque and the rated power are measured under the present test standards. EU and Korea regulations on engine performance test are carefully compared in terms of the accuracy of measurement devices, test procedures including data acquisition method, and allowable range of rated power measurement. Complementary items are discussed to eliminate ambiguities in the present regulation and to construct rational regulation system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.544-551
• /
• 2011

This paper presents the circuit arrangement and effective control method of regenerative energy storage system for an electric vehicle using super-capacitors as the braking energy storage element. A bi-directional controlled current flow of the DC-DC converters with the capacitor bank is connected in parallel with battery, and is controlled so that the whole of the braking energy is effectively absorbed into the capacitors and released back to the electric motor upon acceleration. The converter needs the series-parallel switching circuit for making the best use of the series capacitors and for limiting the step-up ratio of the boost converter. The proposed methods are verified by computer simulation and experimental set-up. They are usefully applied to the electric vehicles such as green cars, electric motorcycles, bike, etc which are power- supplied by the electric batteries.

• International journal of advanced smart convergence
• /
• v.8 no.1
• /
• pp.58-64
• /
• 2019

In recent years, small mobile devices called personal mobility or smart mobility have attracted attention. Personal mobility refers to electric-driven personal transportation that can travel at close range and medium distance, including small electric vehicles, electric bicycles, electric motorcycles and electric scooters. Most of the electric scooters used in Korea are mainly imported from China. This is due to the fact that the price competitiveness of major components of electric scooters is owned in China. At this point, the domestic research direction is preferable for the composition and design of the electric scooter body rather than cost reduction for the components. In this study, we propose a new model of portable folding structure that is easy to use for electric scooters, which are personal vehicles using electric energy. We also made a prototype for practical use.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.674-675
• /
• 2022

In this paper, we present a DPS (FPGA)-based object recognition method that can recognize objects (pedestrians, bicycles, motorcycles) located in the vehicle's blind spot while the vehicle is stopped or driving at low speed and has a fast object recognition performance of 30 frames per second.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.182-192
• /
• 2022

Motorcycle accidents are increasing at an average annual rate of 10.01%, and fatalities are also increasing by 2.64%. Enforcement cameras are installed to enforce safe driving of more-than or equal-to four-wheeled vehicles on the road. Even though the main purpose of this enforcement camera is to disencourage the speed violation of all types of vehicle, one cannot expect complete enforcement by these cameras. In particular, enforcement of the motorcycle should rely on on-site activities through the input of on-site personnel. Recently, to discourage the illegal acts of motorcycling, the National Police Agency introduced the 'National Police Agency SMART National Report'. However, it is necessary to prepare an appropriate practical plan to maximize the effect of enforcement requiring continuous manpower management. This study proposed four types of rider certification IDs for delivery motorcycles. These IDs are institutional devices to manage delivery motorcycle riders. In addition, a experiment on enforcement was conducted using those license ID systems for delivery motorcycles. This experiment confirmed through the image-processing program (D-MESO) if one of the systems was possible to implement for enforcement on the delivery motorcycle rider's license.

• Journal of Energy Engineering
• /
• v.14 no.3 s.43
• /
• pp.173-179
• /
• 2005

Fuel injection system has more benefits in power, fuel consumption and emission than carburetor system even in high speed small engine. Up to date fuel injection system is used in motor car but is not used in motorcycles in Korea. EFI (Electronic fuel injection) system which has ECU can control precise fuel supply to variable RPM in engine. The purpose of this study is the investigation of effects of fuel injection system to improve the engine performance and efficiency in variable revolution of high speed small engine which is 4 Valves SOHC single cylinder engine used in motorcycle.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.1
• /
• pp.45-51
• /
• 2018

There are some ambiguities of the information on the fuel economy provided to the consumers because the standard and the detailed regulations for the fuel economy of the two-wheeled vehicle have not been established in Korea. Since Korea has been a signatory of World Forum for Harmonization of Vehicle Regulations since 1998, it is possible to remove the ambiguities by adopting the WMTC (Worldwide-harmonized Motorcycle Test Cycle) measurement method for the fuel economy of the two-wheel vehicle. As a preliminary study on the WMTC mode fuel economy, road loads measured by coast down method and table method were compared for the two types of two-wheeled motorcycles on sales in domestic market. In the same model, it was confirmed that the deviation of WMTC mode fuel efficiency was below -5% between products. On the other hand, the difference of WMTC fuel economy exceeded 5% between the coast down method and table method.

• Journal of the Korean Regional Science Association
• /
• v.11 no.1
• /
• pp.1-20
• /
• 1995

This paper studies the comparative advantage of competitive and specialized regional industries which are manufacturing, wholesale and retail trade, servies in the metropolitan area-Seoul, Inchun, Kyunggi-do of Korea, For the analysis of industries, the coefficient of specialization, the indices of competitiveness of labor and value-added, the growth rate are simultaneously examined under the criteria of the number of workers, value of shipment, value-added, This comperative synthetic analysis is different from the traditional approaches. This paper shows that the perfectly competitive advantage of specialized industries satisfying all of three criteria are 'other business related activities', 'recreational, cultural and sporting activities' in Seoul, 'machinery and outfits, n.e.c', 'retail trade, except of motor vehicles and motorcycles, repair of personal and household goods' in Inchun. We conclude that each should strategically develop the region-oriented specialized industry which has the comparative advantage. It is the reason why the concentration of industry in necessary for the leading of regional industry under the weaken local public finance. Moreover, such an industy should provide the increase of employment and income from the viewpoint of the activation of regional economy. The potential-specialized competitive industry requires the advanced structure of production under the criteria of value-added. For the development of the metropolitan area's economy, the highly advanced technology industry including computer and electronics should be induced through the loosening of metropolitan regulation. Research center(science park) supported by th private-public sector should be built for the increase of technology sector should be built for the increase of technology power of the small and medium enterprises, Also it is necessary that the small and medium enterprises strategically make the cooperative-large group in order to avoid the disadvantage from the size.

• Journal of Power System Engineering
• /
• v.6 no.4
• /
• pp.30-35
• /
• 2002

This study represents the effects of the material of the air cleaner on the performance in a 4-stroke spark-ignition engine for motorcycles. This study is mainly focused on the possibility of the adopting the STS wire mesh air cleaner of a S.I engine. For investigating the possibility of that, the engine power, the fuel consumption and the exhaust gas analysis were carried out for the synthetic fiber air cleaner and the different size of 200 mesh, 250 mesh, 300 mesh of STS wire mash air cleaner. As the results of this study, the performance of STS wire air cleaner was similar to the fiber air cleaner at 9000 rpm but 300 mesh of STS air cleaner had a high engine power and torque at 9500 rpm. In the case of the synthetic fiber air cleaner the concentration of CO was low at 6500 rpm and in the case of the 300 mesh in STS wire mesh air cleaner the concentration of HC was lowest at all experimental regions.

• Journal of Convergence for Information Technology
• /
• v.7 no.2
• /
• pp.77-82
• /
• 2017

In this paper, a new security algorithm to recognize the type of the vehicle with the vehicle image as a input image is suggested. The vehicle recognition security algorithm is composed of five core parts, such as the input image, background removal, edge areas extraction, pre-processing(binarization), and the vehicle recognition. Therefore, the final recognition rate of the security algorithm for vehicle type recognition can be affected by the function and efficiency of each step. After inputting image into a gray scale image and removing backgrounds, the binarization is performed by extracting only the edge region. After the pre-treatment process for making outlines clear, the type of vehicles is categorized into large vehicles, passenger cars and motorcycles through the ratio of height and width of the vehicle.