• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.174-180
• /
• 2020

본 논문에서는 대공무기체계의 DC 전동기에 적용 가능한 타코 제너레이터의 개발 내용을 담고 있다. 일반적으로 DC 전동기의 제어를 위한 피드백 장치로 타코 제너레이터, 리졸버, 아날로그 홀 이펙트 센서 등의 장치가 사용되는데, 이 중 대공무기체계 운용 특성에 맞추어, 충격 부하와 진동에 견고한 특성을 지닐 뿐만 아니라, 운용 온도 범위가 넓은 타코 제너레이터를 개발하였다. 개발 목표 성능은 현재 운용 중인 타코 제너레이터의 제원 및 요구성능을 토대로 설정하였으며, 이를 바탕으로 타코 제너레이터의 구성품인 모터의 축에 결합되는 회전자와 모터의 하우징에 결합된 고정자를 설계 및 제작하였다. 개발 제품의 시험결과, 일반적인 전기적 특성인 인덕턴스는 31.0 mH, 단자저항은 147.7 Ω로 기준을 충족하였으며, 회전 측도 인자는 9.500 ± 0.475 V/krpm의 기준에 대하여 일반 운용 및 최고속도 이후 운용 조건하에서 모두 충족하였다. 아울러 적용 장비에 대한 환경적 적합성은 단위 온도 변화율을 통해서 확인하였는데, 모두 0.03 %/℃ 이내로 온도 특성이 우수함을 알 수 있었다.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.985-993
• /
• 2008

This paper proposes a new DFIG(Doubly-Fed Induction Generator) system using matrix converter, which is very effectively used for interconnecting the wind power system to the power grid. The operation of proposed system was verified by computer simulations with PSCAD/EMTDC software. The feasibility of hardware implementation was conformed by experimental works with a laboratory scaled-model of wind power system. The laboratory scaled-model was built using a motor-generator set with vector drive system, and a matrix converter with DSP(Digital Signal Processor). The operation of scaled-model was tested by modeling the specific variable-speed wind turbine using the real wind data in order to make the scaled-model simulate the real wind power system as close as possible. The simulation and experimental results confirm that matrix converter can be applied for the DFIG system.

• 신재생에너지
• /
• 제5권3호
• /
• pp.4-12
• /
• 2009

The effect of change in DFIG (doubly-fed wind power generator) rotating speed and active power on the grid was analyzed to understand the characteristics of wind power using the wind power simulator connected to the grid at Gochang Power Quality Test Center. Electric power quality improvement devices (DVR, STATCOM, SSTS) and electric power quality disturbance application devices for 22.9 kV grid are equipped at Gochang Power Quality Test Center. Induction motor and VVVF inverter were used to emulate the blade of a wind power generator, and a simulator for Cage wound induction generator and DFIG was developed. The trial line were assumed to be 20 km and 40 km in length, and variable wind speed pattern was set using wind speed data from Ducjeokdo to verify the power characteristics of the wind power generator according to rotating speed.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2301-2309
• /
• 2018

In a field-oriented vector-controlled permanent magnet synchronous motor (PMSM) control system, the d-axis current control loop can offer a free degree of freedom which can be used to improve control performances. However, in the industry the desired d-axis current command is usually set as zero without using the free degree of freedom. This paper proposes a method to use the degree of freedom for control performance improvement. It is assumed that both the inner loop proportional-integral (PI) current controller and the q-axis outer loop PI speed controller are tuned by the well-known tuning rules. This paper gives an optimal d-axis reference current command generator such that some useful performance indexes are minimized and/or a tradeoff between conflicting performance criteria is made. This paper uses a differential evolution algorithm to autotune the parameter values of the optimal d-axis reference current command generator. This paper implements the proposed control system in real time on a Texas Instruments TMS320F28335 floating-point DSP. This paper also gives experimental results showing the practicality and feasibility of the proposed control system, along with simulation results.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.290-296
• /
• 2006

Control algorithms and implementation issues for a wind turbine simulator are presented for realistic emulation of variable wind characteristics using a lab-scale motor and generator set. When the average wind speed nd turbulence level is given, the torque reference of prime mover is decided through various blocks, such as random wind speed generator, blade characteristic curves, and tower effect compensation. The variable nature of wind can be implemented and tested by not only the computer simulation but also the hardware-in-loop-simulator (HILS). Some application examples of HILS include the development and test of turbine control software for more efficient and stable operation. Feasibility of the proposed simulator has verified by computer simulations and experiment.

• 한국자동차공학회논문집
• /
• 제5권3호
• /
• pp.191-201
• /
• 1997

Accurate positioning of a throttle valve is required to implement the traction control system(TCS) which improves acceleration performance in slippery roads. In this research, position control system is developed for the main throttle actuator(MTA) system which uses one throttle actuation for small volume and DC servo motor for fast response. In order to drive DC motor, PWM signal generator and PWM amplifier were built and interfaced to the motor and controller. Digital PID control law is used as basic control algorithm. In order to prevent overshoot and improve accuracy, velocity profiles are generated and implemented whenever the targer throttle angle is given from the TCS controller. Thanks to velocity profiles, the control performance was very good and only one set of PID gains was used to cover the entire operating range. Also, the resolution of position is about 0.4$^{\circ}C$, which is better than that of stepping motor also used as throttle actuator in some products. The response time of the developed system is also fast enough to implement the engine control based TCS algorithm.

• Journal of Electrical Engineering and Technology
• /
• 제5권2호
• /
• pp.299-306
• /
• 2010

This paper proposes a new doubly-fed induction generator (DFIG) system using a matrix converter controlled by direct duty ratio pulse-width modulation (DDPWM) scheme. DDPWM is a recently proposed carrier based modulation strategy for matrix converters which employs a triangular carrier and voltage references in a voltage source inverter. By using DDPWM, the matrix converter can directly and effectively generate rotor voltages following the voltage references within the closed control loop. The operation of the proposed DFIG system was verified through computer simulation and experimental works with a hardware simulator of a wind power turbine, which was built using a motor-generator set with vector drive. The simulation and experimental results confirm that a matrix converter with a DDPWM modulation scheme can be effectively applied for a DFIG wind power system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.515-516
• /
• 2006

본 논문은 풍속이 변화하는 상황에서 풍력 발전 시스템의 동작을 실시간으로 모의할 수 있는 시뮬레이터의 구성과 실험 결과를 제시한다. 본 논문에서 제시하고자하는 풍력 발전 시스템 시뮬레이터는 실시간 시뮬레이터인 RTDS(Real Time Digital Simulator)와 11kW의 AC 서보 시스템을 포함하는 전동기-발전기 실험 장치(MG set, Motor-Generator Set)로 구현되었다. RTDS는 풍속 모델과 블레이드, 터빈, 발전기를 포함하는 풍력발전 시스템 모델을 실시간으로 모의하며 MG-set은 실시간으로 모의된 풍력 발전 시스템의 물리적 상태를 구현한다. 풍력 발전 시스템 모델의 동작점 궤적과 최대출력점추종(Maximum Power Point Tracking)제어에 의한 풍력 발전 시스템 시뮬레이터의 운전 결과의 제시를 통해 시뮬레이터의 유용성을 검증하였다. 본 논문에서 제시된 시뮬레이터는 상용 실시간 시뮬레이터를 이용하여 간단한 소프트웨어의 수정을 통해 다양한 모델의 풍력 반전 시스템을 모의할 수 있으며 다양한 실험 조건에서 과도상태 및 정상상태 특성 실험이 가능하므로 풍력 발전 시스템의 발전기 특성 평가, 전력 변환 장치의 성능 시험 등에 활용이 가능하다.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.41-45
• /
• 2003

The 42V Mild Hybrid System has been released into market by Toyota for the first time in the world in 2001. The set-up employs an inverter unit to control the motor/generator (MG) electronically. The driving system called such as Toyota Mild Hybrid System (TMHS) has additional new functions to conventional internal combustion engines. When stopping vehicle, the engine stops promptly. When starting vehicle, by releasing the brake pedal MG starts the vehicle at the same time (EV-driving mode). When stepping on the accelerator pedal, or after a given period of time the engine firing occurs and the engine-driving mode starts. When running by motor, the power is supplied to the motor from 36V battery through the inverter. High outputs and instant responses are required for Inverter. At the same time, the compact volume is required to fit into the limited space of the engine room. The compact size and high output are also required to Power Capacitor used for this inverter. The power capacitors has been newly developed, shaped in "flat" type, suitably for the inverter. The points of developments on inverter and power capacitor are described in this paper.his paper.

• 한국정보통신학회논문지
• /
• 제26권6호
• /
• pp.914-921
• /
• 2022

국제해사기구는 친환경규제로 2008년 대비 2050년까지 선박의 이산화탄소 배출량을 70%, 온실가스 배출량을 50% 줄이겠다는 목표를 세웠다. 선주 및 조선소에서는 이를 만족하기 위한 방법으로 LNG추진, 암모니아추진, 전기추진, CO₂포집, 샤프트 제너레이터 등 다양한 연구개발을 추진하고 있다. 이중 샤프트 제너레이터는 개조공사를 통해 기존선에 바로 적용가능한 장점이 있다. 본 논문에서는 기존선에 샤프트 제너레이터를 적용함으로 얻을 수 있는 총 연료 감소율을 시뮬레이션을 통해 검증하였다. 이를 위해, 중형선의 크기를 정의하고, 조속기, 디젤엔진, 프로펠러, 토크 스위치, 샤프트 제너레이터용 발전기와 추진전동기, 선박모델 등에 대해 모델링하고 시뮬레이션하였다.