• Proceedings of the KIEE Conference
• /
• 2001.05a
• /
• pp.305-308
• /
• 2001

The first objective of this study is to set up the switching surge analysis method in motor driving distribution system. The simplified model which can simulate the motor energization and circuit breaker re-ignitions, and each circuit element model is presented in this paper. The second objective is to calculate the quantify of surge over-voltage in real nuclear power station. And the surge suppressing measures are verified on the simulation basis. It is clarified that most cases are not satisfactory to meet the IEEE standard 522-1992 without using surge suppressing measures. In cases that the surge arrester are installed in distribution board at the load side of circuit breaker. The IEEE specification is fully met.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.4
• /
• pp.333-337
• /
• 2003

This paper proposed new techniques of rotor position detection for 8/6 pole Switched Reluctance Motor(SRM). This technique is very simple and easy to find out rotor position. The main idea uses the impulse responses which have different values between aligned and unaligned rotor position. In order to obtain the informations of the rotor position, the impulse applied to the unenergized phases and their responses are analyzed to control the speed of SRM without shaft sensor. Experimental results verify the feasibility of the proposed method.

• Proceedings of the KIEE Conference
• /
• 1999.11b
• /
• pp.3-5
• /
• 1999

This paper deals with the effect on the stress and deformation of the rotor bar of a cage induction motor by the thermal stress, centrifugal force and electromagnetic force. We use both the thermal network method(TNM) and the finite element method(FEM) to analyze the temperature and stress of the rotor.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.3
• /
• pp.275-279
• /
• 2001

In this paper, We have designed the new tooth shape in order to improve the thrust and normal force of HLSM. Also it was analyzed by Finite Element Method and Virtual Work Method. As a result this paper, it was confirmed that the thrust and normal force was improved considerably.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.3
• /
• pp.263-266
• /
• 2001

In this paper, intelligent methods using digital protection relay in power SCADA system is developed in order to protect power systems by means of timely fault detection during operation and control at starting for induction motor which have various load environments and capacities in power systems. The digital protective relay was designed with DSP CPU(TMS320C31) to protect and measure more quickly and precisely. The test result on the basis of KEMC 1120 and IEC60255, show that the operation time error of the digital motor protection relay is improved within ${\pm}5%$. Also, we can control motors at starting according to starting types with simple method as programmable sequence editor. So we can improve the demerits of high cost and much manhour for rework.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.452-455
• /
• 1997

It is well known that Variable Structure Controller(VSC) is robust to parameters variation and disturbance but its performance depends on the design parameters such as switching gain and slope of sliding surface. This paper proposes a more robust VSC that is composed of local VSC's. Each local VSC considers the local system dynamics which has narrow parameter variation and disturbance. We optimize the local VSC's by use of Evolution Strategy, and then we use Artificial Neural Network to generalize the local VSC's and construct the overall VSC in order to cover the whole range of parameter variation and disturbance. Simulation on BLDC motor current control has verified the proposed VSC is superior to the conventional VSC.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.41-43
• /
• 1997

This paper represents the comparison of harmonic loss characteristics of the inverter-driven 3-phase squirrel cage induction motor with slit and U-iron bridge slots of rotor. Two-dimensional time-stepped finite element method is used for electromagenetic field analysis. And spectrums of bar current, phase current, and torque are compared in each case.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2008-2010
• /
• 2000

The first objective of this study is to set up the switching surge analysis method in motor driving distribution system. The simplified model which can simulate the motor energization and circuit breaker re-ignitions. and each circuit element model is presented in this paper. The second objective is to calculate the quantity of surge over-voltage in real nuclear power station. And the surge suppressing measures are verified on the simulation basis. It is clarified that most cases are not satisfactory to meet the IEEE standard 522-1992 without using surge suppressing measures. In cases that the surge arrester are installed in distribution board at the load side of circuit breaker. The IEEE specification is fully met.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.852-854
• /
• 2003

A aluminum recycling industry is one of new application of Linear Induction Motor(LIM). As the example a melting furnace. which is using LIM, to melt conductor which is chipped and scrapped is supposed for the aluminum recycling industry. So, in this paper, the LIM for melting furnace are designed. And a electro-magnetical characteristic of designed model is analyzed by 2D-FEM.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.213-216
• /
• 2004

It is a quite quality concerning to control temperature of single crystalline growth as it does when you get most of heat treating products. It is also important factor to control temperature when you make the $A1_2O_3$(single crystalline) used to artificial jewels, glass of watches, heat resistant transparent glasses. Thus, it is a major interest to get the proper temperature in accordance with the time process while you are making mixture of oxygen and hydrogen to have the right temperature. In this paper, we will study of electrical valve positioning system for the gas mixture to improve the quality of products.