• 항공우주시스템공학회지
• /
• 제17권6호
• /
• pp.100-107
• /
• 2023

영구자석 동기전동기의 권선 개방 고장은 권선이 끊어지거나 인버터 스위치의 고장으로 발생한다. 권선 개방 고장이 발생하면 전동기에 토크리플과 진동이 발생하게 되며, 영구자석 동기전동기를 작동기로 사용하는 항공기 등을 포함하는 운행체의 안전성에 치명적인 영향을 미치게 된다. 따라서 신속한 고장 검출 및 분류가 필수적이다. 본 논문에서는 영구자석 동기전동기의 권선 개방 고장의 검출과 고장 위치 파악을 위한 분류 기법을 제안한다. 제안된 기법은 확장칼만필터를 통해 고장을 검출 후 다중모델 필터를 통해 고장을 분류한다.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.23-30
• /
• 2014

This paper presents an on-line diagnosis system for identifying health and faulted conditions in squirrel-cage induction motors using stator current, temperature, and partial discharge signals. The proposed diagnosis system can diagnose induction motor faults such as broken rotor bars, air-gap eccentricities, stator winding insulations, and bearing faults. Experimental results obtained from induction motors show that the proposed system is capable of detecting induction motor faults.

• 한국정보통신학회논문지
• /
• 제6권2호
• /
• pp.294-299
• /
• 2002

이 논문은 신경회로망을 기반으로 한 유도전동기의 고장 진단 기법을 제시한다. 제안된 기법은 고정자전류만을 측정하여 FFT 변환 후 진단 훈련을 위해 일반화한다. 정상, 베어링고장, 고정자 권선고장 그리고 회전자 엔드-링 고장을 갖는 모터로부터 학습데이터를 획득하고 여러 고장 유형을 진단한다. 더욱 효과적인 고장 진단을 위해, 전부하의 100％, 60％, 30％로 부하율을 변화시켜서 학습절차에 적용하였다. 실험 결과들은 제안된 방법이 오차 범위 0.56％∼0.04％와 같은 높은 진단 정밀도를 가지고 있어 실제 진단시스템에 적용 가능함을 보여주고 있다.

• 한국멀티미디어학회논문지
• /
• 제25권11호
• /
• pp.1547-1556
• /
• 2022

As mechanical facilities are interacting with each other, the failure of some equipment can affect the entire system, so it is necessary to quickly detect and diagnose the abnormality of mechanical equipment. This study proposes a deep learning model that can effectively diagnose abnormalities in rotating machinery and equipment. CNN is widely used for feature extraction and LSTMs are known to be effective in learning sequential information. In LSTM, the number of parameters and learning time increase as the length of input data increases. In this study, we propose a method of segmenting an input segment signal into shorter-length sub-segment signals, sequentially inputting them to CNN through a time-distributed method for extracting features, and inputting them into LSTM. A failure diagnosis test was performed using the vibration data collected from the motor for ventilation equipment installed at the urban railway station. The experiment showed an accuracy of 99.784% in fault diagnosis. It shows that the proposed method is effective in the fault diagnosis of rotating machinery and equipment.

• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.965-975
• /
• 2005

In the case of the fault in stator windings of a high voltage motor. it facilitates certain destructive characteristics in insulations. This will result in a decreased reliability in power supplies and will prevent the generation of electricity, which will result in huge economic losses. This study simulates motor windings using normal windings and four faulty windings for an actual fault in stator winding of a high voltage motor. The partial discharge signals produced in each faulty winding were measured using an 80 PF epoxy/mica coupler sensor. In order to quantified signal waves its a way of feature extraction for each faulty signal, the signal wave of winding was quantified to measure the degree of skewness shape and kurtosis, which are both types of statistical parameters, using a discrete wavelet transformation method for each faulty type. Wave types present different types lot each faulty type, and the skewness and kurtosis also present different quantified values. The result of feature extraction was used as a preprocessing stage to identify a certain fault in stater windings. It is evident that the type of faulty signals can be classified from the test results using faulty signals that were randomly selected from the signal, which was not applied in the training after the training and learning period, by applying it to a back-propagation algorithm due to the supervising and learning method in a neural network in order to classify the faulty type. This becomes an important basis for studying diagnosis methods using the classification of faulty signals with a feature extraction algorithm, which can diagnose the fault of stator windings in the future.

• 한국컴퓨터정보학회논문지
• /
• 제18권12호
• /
• pp.11-19
• /
• 2013

본 논문에서는 유도 전동기의 기계적 결함을 진단하기 위해 진동신호와 질감 분석을 이용한 알고리즘을 제안한다. 영상화된 결함 신호가 갖는 무늬, 색상 대비의 특징을 분석하고, 그레이레벨 동시발생행렬(Gray-Level Co-occurrence Model, GLCM)을통해 세 가지 질감특징을추출한다. 추출된 세 가지질감 특징을 RBF(Radial Basis Function) 커널 함수를 사용하는 다중레벨 서포터 벡터 머신(Multi-Level Support Vector Machine, MLSVM)의 입력으로 사용하여 결함 유형을 분류한다. 결함 유형을 분류하는 최적의 MLSVM을 위한 RBF 커널 함수의 매개변수를 찾기 위해 매개변수 값을 0.3부터 1.0으로 바꿔가며 분류성능을 평가한 결과, 결함 유형별로 0.3에서 0.6사이의 매개변수 값에서 100%에 가까운 분류 정확성을 보였다. 또한 15dB, 20dB의 잡음이 첨가된 진동신호를 이용한 실험에서도 평균 98%이상의 높은 분류 정확성을 보였다.

• Journal of Power Electronics
• /
• 제8권2호
• /
• pp.181-191
• /
• 2008

The task performed by induction motors grows increasingly complex in modern industry and hence improvements are sought in the field of fault diagnosis. It is essential to diagnose faults at their very inception, as unscheduled machine down time can upset critical dead lines and cause heavy financial losses. Artificial intelligence (AI) techniques have proved their ability in detection of incipient faults in electrical machines. This paper presents an application of AI techniques for the detection of inter-turn insulation and bearing wear faults in single-phase induction motors. The single-phase induction motor is considered a proto type model to create inter-turn insulation and bearing wear faults. The experimental data for motor intake current, rotor speed, stator winding temperature, bearing temperature and noise of the motor under running condition was generated in the laboratory. The different types of fault detectors were developed based upon three different AI techniques. The input parameters for these detectors were varied from two to five sequentially. The comparisons were made and the best fault detector was determined.

• 한국지능시스템학회논문지
• /
• 제16권1호
• /
• pp.119-123
• /
• 2006

본 논문에서는, 주성분분석기법과 다층신경망에 기반을 유도전동기의 고장진단기법을 제안하고자 한다. 입력의 수가 많을 경우 다층신경망만을 이용하여 분류하는 데는 한계가 있다. 이러한 문제점을 해결하기 위해 주성분분석기법에 의해 입력특징의 수를 축약한 후, 비선형분류기인 다층신경망을 적용하였다. 또한, 주성 분석기법에 추출된 특징벡터가 고장상태별로 비선형성 특성을 보일 경우 기존의 거리척도 기반에 의한 분류방법으로 정확한 진단을 하는데 어려움이 있다. 이를 위해 비선형 분류기인 MLP를 적용함으로써 효과적인 고장진단을 하자 한다. 세안된 기법은 다양한 실험을 통해 기존의 선형분류기에 비해 우수한 겨과를 보임을 나타내고자 한다.

• Journal of Power Electronics
• /
• 제17권4호
• /
• pp.972-982
• /
• 2017

The Park's vector of stator current is a popular technique for the detection of induction motor faults. While the detection of the faulty condition using the Park's vector technique is easy, the classification of different types of faults is intricate. This problem is overcome by the Multiple Park's Vector (MPV) approach proposed in this paper. In this technique, the characteristic fault frequency component (CFFC) of stator winding faults, rotor winding faults, unbalanced voltage and bearing faults are extracted from three phase stator currents. Due to constructional asymmetry, under the healthy condition these characteristic fault frequency components are unbalanced. In order to balanced them, a correction factor is added to the characteristic fault frequency components of three phase stator currents. Therefore, the Park's vector pattern under the healthy condition is circular in shape. This pattern is considered as a reference pattern under the healthy condition. According to the fault condition, the amplitude and phase of characteristic faults frequency components changes. Thus, the pattern of the Park's vector changes. By monitoring the variation in multiple Park's vector patterns, the type of fault and its severity level is identified. In the proposed technique, the diagnosis of faults is immune to the effects of unbalanced voltage and multiple faults. This technique is verified on a 7.5 hp three phase wound rotor induction motor (WRIM). The experimental analysis is verified by simulation results.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.603-608
• /
• 2001

In order to distinguish fault electric motors automatically in real time. an intelligent diagnosis technique may be required. This paper presents an automatic fault detection system for electric motors by using their acoustic noises. Time signals of each candidate motor were measured in an anechoic chamber for further analysis. Spectral analysis was first carried out and they showed that two typical types of fault motors could be successfully distinguished in the frequency domain; bearing faults and scratches. Unlike the trend of normal motors that shows only a single dominant peak at around 2000 ㎐, several peaks are bunched together in bearing fault motors. On the other hand, large frequency noises at around 6500 ㎐ are newly arisen in scratchy fault motors. However, the processing time for spectral analysis was rather long for a real time application in production lines. Thus, a number of band-pass filters were used in the time domain instead for a real time application. Before applying filters, the bands of filters were set from the information of spectral analysis. By applying a set of band-pass filters, the RMS values of each filtered signal were calculated, and thus the normal and damaged motors could be successfully distinguished.